Thanks for the info Cliff.
On Fri, May 29, 2009 at 12:45 AM, Cliff McGlamry wrote:
> I know that's required for MOH from flashbut I wasn't aware that it's
> required when the caller is getting it direct from the MOH server.
>
> However, it won't hurt having it in there.
>
> Regarding IGMP
I know that's required for MOH from flashbut I wasn't aware that it's
required when the caller is getting it direct from the MOH server.
However, it won't hurt having it in there.
Regarding IGMP snooping, this is something that the ESW uses to determine if
multicast streams are subscrib
Update:
I found adding "No MGCP timer receive-rtcp" is needed to allow the MGCP GW
to keep the call active.
Apparently, if the GW doesn't receive rtcp traffic within 30 seconds, it
disconnects the call assuming it's a hung resource/call.
On Thu, May 28, 2009 at 11:58 PM, Scott ODonnell
wrote:
>
Ok , I found the primary problem.
I forgot to put PIM on the HQ router interface facing my CCM servers.
Multicast MOH is now working with g.711 or g.729 depending on the Region
settings.
I still have the problem where the PSTN call is disconnected after approx 50
secs.
This doesn't happen on phon
Hi Cristi
I have not configured any broadcast . This is the regular VPIM. Thats why it
is puzzling why it takes so long.
Thx
John
-- Forwarded message --
From: Cristi Radescu
Date: Thu, May 28, 2009 at 5:04 AM
Subject: Re: [OSL | CCIE_Voice] VPIM CUE.message & MWI takes a long ti
Brian - I'll call our Support Manager and have someone reach out to you.
Regards,
Wayne A. Lawson II - CCIE #5244
President & Founder - IPexpert, Inc.
Email: wlaw...@ipexpert.com
Mobile: 810.334.1564
* For my SMS vCard Text WLAWSON to 50500
:: Message sent from iPhone.
On May 28, 2009, at 7:3
Question... Is the 871 router supported for hardware VPN?
On Thu, May 28, 2009 at 7:51 PM, Larry Hadrava wrote:
> Brian:
> Glad you found it.
> Please send me a private email with the "wrong path" so I can have that
> removed if it is there and confusing folks. Don't take time from your rack
> se
Brian:
Glad you found it.
Please send me a private email with the "wrong path" so I can have that
removed if it is there and confusing folks. Don't take time from your rack
session to do it, maybe after you are done.
thanks
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
Nevermind, I found the right "path" to the right form.
On Thu, May 28, 2009 at 7:43 PM, Brian Valentine wrote:
> Fine. But if I follow that link correctly, it sends me to the defunct
> certificationtalk.com website.
> I will try again.
>
>
>
>
> On Thu, May 28, 2009 at 7:40 PM, Aamir Panjwani
>
When I follow either of the "incorrect" links to the forms, I can fill
out the form, but the submit button is missing. Real Nice Website!
On Thu, May 28, 2009 at 7:43 PM, Brian Valentine wrote:
> Fine. But if I follow that link correctly, it sends me to the defunct
> certificationtalk.com webs
Fine. But if I follow that link correctly, it sends me to the defunct
certificationtalk.com website.
I will try again.
On Thu, May 28, 2009 at 7:40 PM, Aamir Panjwani
wrote:
> Once you log into proctor lab session, on the right hand side you will
> see a option to contact after hours support.
Brain:
Aamir is right on. You should get a quick response.
Thanks
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Thu, May 28, 2009 at 7:36 PM, Brian Valentine wrote:
> All,
>
> I need after hours support from proctorlabs. How can i get
Once you log into proctor lab session, on the right hand side you will
see a option to contact after hours support. You will need to submit the
online form in there and someone will hopefully get back to you via
email shortly
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
All,
I need after hours support from proctorlabs. How can i get help?
Brian
>
> Line1 : 3001
>
> Line2 : 3101
>
>
>
> Phone 2
>
> Line1 : 3002
>
> Line2 : 3102
>
>
>
> Each line need to be access to GDM mailbox, and when
> a message is left on GDM I need to have VM Letter on both
> Line2
Hi Group,
V3, Lab 3A, Q3.5: I was trying to register my home 7961 SIP phone to BR2, but
the phone is keep saying upgrading, then reset and repeat, got stuck in a loop.
Here are my questions:
1) Is it because some of the phone loads files are missing from the
PHONE/7941-7961 directory?
This is
Ok. Check the following:
1. Do you have either: a. Transcoders configured on both ends/assigned to
appropriate MRG/MRGLs and applied to devices/gateways
or
Do you have g.729 support enabled under the service parameters?
2. Do you have locations CAC or regions setups that might be blocking
Actually, you might be able to do it if it is on CME.
Assign button 2 as an overlay, and put the mailbox number DN on the overlay
ephone-dn. It should be hard forwarded so it will never ring, but I bet that
would make the envelope appear the way being discussed.
From: Cristi Radescu
Sen
Thanks so much. That did the trick.
CME now works as PSTN hub accepting inbound calls.
Cheers,Padhu
From: kapil atrish [mailto:nice_cha...@yahoo.com]
Sent: Thursday, May 28, 2009 11:30 AM
To: Padmanabhan, Padhu; ccieid1ot
Cc: ccie_voice@onlinestudylist.com
Subjec
That's a common issue. Create one DP on CME as following:
dial-peer voice xxx pots
incoming called-nu .
direct-inward-dial
!
--- On Thu, 5/28/09, ccieid1ot wrote:
From: ccieid1ot
Subject: Re: [OSL | CCIE_Voice] Problem with outgoing calls from Branch via T1
Pri to simulated PSTN router
To:
Sorry, was a typo when I was configuring. Actually, I did set up:
ephone 1
button 1:1 2o5,3
ephone 2
button 1:2 2o5,4
And for this case, the envelop appers for both phones, but the label Support 1
also, what is bad.
From: cristian.rade...@crescendo.ro
To: spoli...@hotmail.com; cyrus@gmai
otmail&utm_medium=Tagline&utm_campaign=IE8
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090528/8b57e9bb/attachment-0001.htm
--
Message: 2
Date: Thu, 28 May 2009
Hi Sergio,
Are you sure? I was sure MWI doesn't work with overlay lines.
I tested it once again right now, after your answer, and it seems to me that it
doesn't work.
If you have 2 ephone-dn (e.g 5,6 in your example) it will send MWI/Envelope
only to first defined extension(e.g.5);
If you have o
Yeah! Its really depend on the requirements.
In this case for e.g. the System Message will be override by "2:Forward to VM"
> Date: Thu, 28 May 2009 23:43:17 +1000
> Subject: Re: [OSL | CCIE_Voice] GDM configuration with notification on 2
> phones
> From: cyrus@gmail.com
> To: spoli.
I guess it should be ,
ephone-dn 6
number 3100 (GDN)
label Support 2
call-forward all VM
Sine u call GDM directly or u call other numbers then if they have
noan set then they would forward to GDM (3100)
Just my thoughts here though! :)
On Thu, May 28, 2009 at 11:23 PM, Sergio Polizer wrote:
>
Hi, If you could associate a Label for the secondary lines, a possible
solution could be:
Face Requirement:Phone 1
Line1 : 3001
Line2 : Support 1Phone 2
Line1 : 3002
Line2 : Support 2
ephone-dn 1
number 3001
ephone-dn 2
number 3002
ephone-dn 3
number 3101
ephone-dn 4
number 3102
eph
MOH over WAN.
On Wed, May 27, 2009 at 11:50 PM, Cliff McGlamry wrote:
> Are you attempting MOH over the WAN or MOH from flash?
>
>
>
> *From:* Scott ODonnell
> *Sent:* Wednesday, May 27, 2009 11:21 PM
> *To:* OSL Group
> *Subject:* [OSL | CCIE_Voice] Question re: MOH Multicast to SiteB PSTN
Hi,
It's a normal behavior. It's default value for check frequency.
Pleasee see below. You can change this in "Advanced Settings".
Conversation - System Broadcast Message Check Frequency
Specify how often Cisco Unity checks for new broadcast messages. By default,
Cisco Unity checks for new broa
I think this is not possible. With "secondary number" or "overlay" it will not
work.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David Corbeil
Sent: 27 May, 2009 8:42 PM
To: 'ccie_voice@onlinestudylis
29 matches
Mail list logo
