I'll be there, too.
On Fri, Jul 3, 2009 at 7:05 AM, Paul Thomas wrote:
> I'll be coming down for that one too...
>
>
> Paul Thomas CCIE 15175
>
> -Original Message-
> From: ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amp
> Sent:
Can you rephrase that with more detail?
Thanks
From: Bill Talley [bill.tal...@aos5.com]
Sent: Friday, July 03, 2009 12:19 PM
To: Michael Ciarfello; Erwan Erwan; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] X-lite in CM 7.0
Unless you configure a
Thanks Drew has got back to me just now
From: ccie_voice-boun...@onlinestudylist.com on behalf of Aamir Panjwani
Sent: Sat 4/07/2009 3:10 PM
To: supp...@proctorlabs.com
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Proctor Labs After Hours Sup
Hi ipexpert,
I logged after hours support request 45 minutes ago but no response so far. I
am on pod 22 and when I go to load config there is no intial or final config
for lab 5C or any other lab after that?
Can someone please get back to me asap otherwise i won't be able to work on lab
Hi Vik,
Thanks for your help. I got Q1 solved. There was something wrong with CSS
because of left over configs from the previous task.
On the Br1-MGCP phone, apart from fixing the CSS, I had to create a
dial-peer to point to the BR2-CME:
dial-peer voice 105 pots
destination-pattern 3...
no
Very very unusual. To pinpoint this as a firmware problem can you try a call
between CIPC and IP Blue and see what results you get. I have a vague
recollection that people were suffering with 7961 phones registered to UCM
but I¹m not 100% sure on that. The reason I¹m assuming the cause is the
firmw
I might do the Dec 7th, one week lab experence. Unless there is going to be one
in early Jan. Anyone going to THAT?
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vik Malhi
[vma...@ipexpert.com]
Sent:
Sending this again as I didn't receive any responses (I had a new spam filter
in place so they might have gotten dropped).
Thanks,
PT
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Paul Thomas
Sent: Sunday, June 28, 2009 11:55 AM
To: cc
I am planning on going October 19th as well.
Mike Brooks
CCIE#16027 (R&S)
On Sat, Jul 4, 2009 at 2:43 AM, amccar...@cciequest.com <
amccar...@cciequest.com> wrote:
> That's great Vik. I hope the instructor is good too, word on the street is
> IPexpert SUPPOSED to have the best of the best. ;-)
>
Sorry,
That config is long gone now.
I'll try it again though in the next day or two and post it to the list.
- Scott
On Fri, Jul 3, 2009 at 3:09 PM, Vik Malhi wrote:
> Do not use "final" destination in ephone-hunt.
>
> Make all members of the huntgroup busy as opposed to no answer. Then try
Do not use "final" destination in ephone-hunt.
Make all members of the huntgroup busy as opposed to no answer. Then try the
timer you mentioned. There is a minimum value for the timer you mentioned.
--
Vik Malhi CCIE #13890, CCSI #31584
Senior Technical Instructor - IPexpert, Inc.
Telephone:
Ron is correct- use ³show flash² to find where the GUI files are located and
set the http path accordingly. II think you need the following command:
Ip http path flash://GUI
--
Vik Malhi CCIE #13890, CCSI #31584
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.8
Q1- BR1 phone calling another phone is not dependent on the CSS of the BR1
gw- the only reason you set the CSS on a gw is to route calls coming in from
the PSTN to an internal destination. If BR1 phone 2 cannot call anywhere
check the CSS on the ³device².
Q2- css-internal on trunks / gateway is re
Hey Vik,
Thanks.
You got me thinking and I found the problem.
As I was reading your email, I disregarded the whole issue of Multicast
routing because I figured the server and the 6608 are plugged right in the
same 6k chassis, so PIM wouldn't be needed.
It didn't even occur to me until I was readin
That's great Vik. I hope the instructor is good too, word on the street is
IPexpert SUPPOSED to have the best of the best. ;-)
-- Sent from my Palm Pre
Vik Malhi wrote:
I will be going to that bootcamp- hope the instructor is good:-)
--
Vik Malhi CCIE #13890, CCSI #31584
Senior Technical Inst
I will be going to that bootcamp- hope the instructor is good:-)
--
Vik Malhi CCIE #13890, CCSI #31584
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join our free online support and peer group communities:
http://www.I
Use Remote Desktop (MSTSC) to get on the UCCX and use browser on the server.
--
Vik Malhi CCIE #13890, CCSI #31584
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join our free online support and peer group communities:
The symptoms you are experiencing will help narrow down the problem.
Tone on Hold- most likely IP Voice Streaming App service params need to be
set to allow g729 + g711. For IOS MGCP gw- no mgcp/mgcp. You MUST configure
ccm-manager music for IOS MGCP and IOS H323 gateways. Yes- I really do mean
h3
I did "set igmp enable" on the cat6kPutting another call into HQ via 6608
and then having the hq phone put it on hold shows
1.) a MMOH session in perfmon
2.) Show the 6608 port listed in a "Show Multicast group" on the Cat6k.
So the mechanics of the multicast seem to all be there.
BUT
No MOH on th
Good Morning.
I followed the blog on using the s/w vpn with ICS with HW phones behind
my laptop nic. I static assigned my HW phone's as per blog but they
won't reg with UCM or CME. My wireless is my connection to the
internet. I am on my company wireless though and not my home wireless.
One of
Having a problem with UCCX 7 in that the drop down menus don¹t work in any
browser I have tested, including the version of IE installed on the server.
Probably a javascript type issue but I cannot pin it down any ideas please
?
Graham
I'll be coming down for that one too...
Paul Thomas CCIE 15175
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Amp
Sent: Friday, July 03, 2009 5:43 AM
To: CCIE-Voice
Subject: [OSL | CCIE_Voice] October Boot Cam
Follow up:
*This doesn't appear to be true after testing.*
I removed all MRGL settings from my gateways, reset them and tested.
MOH is working based on the Device Pool settings for 6608 and H323 gw's.
One thing to note is it appears the 6608 has a flaky problem with Multicast
MOH. I see the MOH
That is a really good tip, which I didn't realize.
Is that true for ALL gateway types?
On Fri, Jul 3, 2009 at 7:46 AM, GRAFL
Philipp wrote:
> Have you set on CCM/Device/Gateway the right MRGL? The Gateway does not take
> the MRGL of the associated Device Pool, you have to set it explicit on the
Have you set on CCM/Device/Gateway the right MRGL? The Gateway does not take
the MRGL of the associated Device Pool, you have to set it explicit on the GW.
-Ursprüngliche Nachricht-
Von: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] Im Auftrag
Hey gang,
I was wondering who, if anyone, is going to the boot camp in San Jose
from October 19 - 30?
Amp
hmmm interesting i tried it that way once it did not gave me the results
that i was expecting...
On Fri, Jul 3, 2009 at 3:27 PM, GRAFL Philipp
wrote:
> I don‘t agree with that. Device Association on end user does only affect
> Device Control (CTI). Line appearance association does only affect
I don't agree with that. Device Association on end user does only affect
Device Control (CTI). Line appearance association does only affect phone
presence. You definitely need both. All under the aspect that we are
talking about a 6.x system or higher.
Von: Ravindra Lakpriya [mailto:lakpr
Hi,
I configured css-internal on the BR1- MGCP and the H323 gateways .
Q1. BR1 phones can't call HQ or BR2
However, HQ and BR2 phones can both call BR1 phones.
HQ phones and BR2 phones call each other and the PSTN phone as well.
Route plan is : RP->rl-local-gw->Standard local Route
Q2. I a
or else you can go to end users then go to Device associations and select
controlled devices. add your hard phones and the CUPC to controlled device.
then you are good to go..
And one more thing to make sure the configuration check the presence gateway
configuration.
all the best
On Fri, Jul 3,
You have to associate both lines appearances to the corresponding user. It is
not sufficient to associate the device to the end user. So, go to device
deskphone, click on the line, go to the bottom of the page to "associate end
user", do it. Then do the same for the UPC-device.
Von: Cris
31 matches
Mail list logo
