It's not shipping yet. It will be announced on our blog - and this
list -and everyone will be made aware of how to order a copy.
Regards,
Wayne A. Lawson II - CCIE #5244
Founder & President - IPexpert, Inc.
Mailto: wlaw...@ipexpert.com
Mobile: +1.810.334.1564
:: Message sent from iPhone.
On A
my bad, I thought I saw in another post that someone said Friday or Monday
at the latest.
I have no problem waiting, best part about the IPX stuff is the quality,
and quality takes time. saw some stuff that a competitor had put together
and you couldn't even see the material being demo'd, v
yea. I only have one dspfarm. 7.0 though
Send me a show diag output. You can blank out your serial numbers
BR2#sh telephony-service
CONFIG (Version=7.0(1))
=
Version 7.0(1)
Cisco Unified Communications Manager Express
BR2# sh ver
System image file is "flash:c2800nm-adventerp
Wayne's last email is that it will be available within two weeks that dev team
is working on making it pretty now adding the menus and such...he said two
weeks with an expectation that it may be earlier (this was Friday I think).
The Audio will be out in about 6 weeks as it will be a total new
nothing in mines
Respectfully Charles George
> From: mthompson...@gmail.com
> To: jonv...@gmail.com; md...@proctorlabs.com
> Date: Tue, 4 Aug 2009 22:03:06 -0400
> CC: ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] Volume 2 and Videos?
>
> Anyone else seeing anything in the
Anyone else seeing anything in their 'my hard drive' area? I assume it will
either be there or something they ship, but I don't see any update on the
blog either.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of J
Make sure that you aren't running an AMD processor. UCM (and I assume
others) are assuming Intel since both the HP and Intel servers use them. I
built my machines on another machine and exported them to the AMD box, they
run fine, just won't install.
MT
From: ccie_voice-boun...@onlinestudyli
when I was configuring this on my cme. The transcoder would not register. cme
7.1
As soon as I made the sdspfarm units be 2 under telephony-ser it would register.
Are you able to register your xcoder with it being set for 1?
Respectfully Charles George
From: mciarfe...@iplogic.co
Why should sdspfarm units be 2?
Sounds like a good open-ended question.
From: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] On Behalf Of c george
[cisco...@hotmail.com]
Sent: Tuesday, August 04, 2009 4:28 PM
To: pa...@marshallcomm
voice card
dsp ser dspfarm
sccp ...
ass profile 1 register (name)
use this name when (name) when registering the xcode to cucm. If it is a pvdm2
you need to select enhance transcoding ios
if this is cume
under telephony-service
sdspfarm units should be 2
if it is
Issue "no shut" on the dspfarm profile...and as you haven't posted
rest of the config I presume you have enabled the associated farm under
sccp group?
Paul (#16842 RS/Sec)
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Dave
Hello, I am new to the study list... I have searched the archives and not seen
the issue of dsp being in admin down state, why is this ?? I cannot figure out
how to get it admin'd up so it is always showing me zero dsp available. I have
an NM-HDV in each of my 3725 lab routers each with either
let me also add this is a h323 gw
and when in a low bandwidth state inbound call fail as well.
a debug voip ccapi inout show call fails because ccm is not responding
Respectfully Charles George
From: cisco...@hotmail.com
To: jonv...@gmail.com
Date: Tue, 4 Aug 2009 18:18:23 +
CC:
great idea!!
same results. sip phone 7961 cannot call out dialing a PSTN #. (9+#)
But AAR works. internal number shows reroting and dials over the PSTN.
is anyone else using a 7961 and checked sip aar for both internal and dialing a
pstn number directly while in a low bandwidth state
I took the lab last week and everything was there... didn't look for
tech notes, but saw all of the configuration guides...
Jonathan
On Tue, Aug 4, 2009 at 12:31 PM, Steve Sarrick wrote:
> Here is the info Mark Snow posted not too long ago:
>
>
>
> Yes - everything EXCEPT for TechNotes. Those ar
OK, put them both in the same CSS and see if the problem goes away
(use the SCCP CSS for the SIP phone...)
Then you know it is a RG issue...
J
On Tue, Aug 4, 2009 at 11:44 AM, c george wrote:
> different css for sip and sccp
>
> everything is fine with sccp
>
> this is only a issue with a sip ph
Here is the info Mark Snow posted not too long ago:
Yes - everything EXCEPT for TechNotes. Those are not promised (and
shouldn't be expected).
Otherwise the link for exactly what is in the lab was published some
time ago in this news article (third from the bottom):
http://www.cisco.com/web/l
I just read the other day that Cisco no longer uses the UniverCD for the
labs, but instead uses the section of Cisco.com where all the documentation
is. Is that true?
Thanks!
Matthew Berry
Minneapolis, MN 55438
Mobile: 651-304-7624
www.rawreligion.com
Skype: ciscovoiceguru
"Knowledge speaks, b
different css for sip and sccp
everything is fine with sccp
this is only a issue with a sip phone
makes no sense to me because PSTN Calling should not have anything to do do
with how much bandwith you have. The call is going out its local gateway.
Respectfully Charles George
> D
Are you matching a pattern pointing at a local route group? Is the
local route group down? Is it failing over to a remote RG? Are the CSS
of the SIP and SCCP phones the same?
Jonathan
On Tue, Aug 4, 2009 at 11:08 AM, c george wrote:
> 1st of this is only a Sip Problem
>
> 7961 phone firmware Si
1st of this is only a Sip Problem
7961 phone firmware Sip 41.8-5-2s
CUCM 7.1.2009
AAR works
but when I call a PSTN NUMBER by dialing 9+PSTN the call fails stating not
enough Bandwidth.
But AAR works. When dialing a Internal number call reroutes as is expected.
3000 - 4375553000. C
Cisco IP Communicator 7
Jonathan
On Fri, Jul 31, 2009 at 10:21 AM, Willie McAllister wrote:
> Are there any other free IP phone products out there that we can use that
> will be Gen 2 IP phones, similar to the IP blue Gen 1 7960 IP phones? Thanks
>
> _
Yes, you will have access to the doc CD in the class.
--
Thanks
Larry Hadrava
CCIE #12203 CCNP
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Tue, Aug 4, 2009 at 8:52 AM, c george wrote:
> Hello,
>
> While we are doing labs at your Ipexpert BootCamp in Ohio, are we, do w
Hello,
While we are doing labs at your Ipexpert BootCamp in Ohio, are we, do we, have
access to the Cisco Documentaton CD?
Respectfully Charles George
_
Get your vacation photos on your phone!
http://windowsliveformobile.com/
24 matches
Mail list logo
