I removed the option 150 from my dhcp pool since some of the phones shouldn't
use 10.10.210.10 for their tftp server - the PSTN and BR2 phones, for instance.
Since I removed the option 150 command, I had to use alternate tftp server on
the ip phones.
Brian
Sent via BlackBerry from
CCing the list for their benefit.
If you use an 871 router, you would need to keep your DSL modem. I believe
the 851 router can terminate DSL directly. You'd have to check with your
ISP if they will support it as your modem.
I am using three 7960s and two 7961s. I have a 3524-PWR-XL-EN
Alright Chris made me chime in
I have the Kindle DX and can say it honestly does work very well for cisco
docs.
The PDF support is impressive actually. With the exception of the points
made earlier (no search, slow refresh no table of contents)
With that being said I have only purchased
Hello Everyone
I have been fghting this now for 2 days. seems simple enough but when
ever I call into a FXO port i get sorry opening greetingOpening
greating is not available, from a touch tone phone you can dial by name
etc,)
So it seems the opening greeting is not working but the
please ignore fixed it, :-)
On Tue, Oct 6, 2009 at 9:08 AM, J Hogan j.jho...@gmail.com wrote:
Hello Everyone
I have been fghting this now for 2 days. seems simple enough but when
ever I call into a FXO port i get sorry opening greetingOpening
greating is not available, from a
/ccie_voice/attachments/20091006/91e96124/attachment.html
--
Message: 2
Date: Tue, 6 Oct 2009 09:19:54 -0500
From: J Hogan j.jho...@gmail.com
Subject: Re: [OSL | CCIE_Voice] Unity Connection Opening greeting is
not available
To: ccie_voice
For what its worth, we have enough invasion of electronics in every part of our
life
From electronic toothbrushes to ipods to emails on BB/Iphone etc etc
Did I even mention WII sports ?
The Joy of reading a book on a beach or a park or next to a pool is second to
none
Plus your
3. Depends upon what the PSTN expects or, more importantly, what exact
digits are necessary to route the call...PSTN, trunk, etc. What gets stored
in Placed Calls is always, at least I can think of no other exception at the
moment, the exact digits you dial on the phone. What the phone displays
Hi,
Suppose the following scenario:
- CAC via RSVP active
- no more bw resources (forced via ip rsvp band 39)
- AAR active
- SNR active for HQPh2
When Br1Ph2 calls HQPh2 just his PSTN number rings. But If I disable SNR via
Mobility soft key, AAR works and HQPh2 rings.
Does someone see it
Hello,
Am working on lab 3 question 2.4
After creating the globalization, when i call i see the full E.164, when the
localization is applied i see 4 digits in displa as well as the received
calls.
Am using 7970 phones, which i guess is supported fr globalization
Any one with any idea is what is
Hi Sergio
I had exactly the same thing I thought it might be deliberate, but haven¹t
managed to find this behaviour being documented.
Best regards
Mick
E: m...@pobox.net.uk
From: Sergio Polizer spoli...@hotmail.com
Date: Tue, 6 Oct 2009 19:19:29 -0300
To: ccie_voice@onlinestudylist.com
I¹ve seen this too. My conclusion is that when SNR is active you are in
effect calling a shared line (HQ P2 and Remote Dest in your example). Since
one of the calls succeeds (Remote Destination) UCM does not consider there
to be network congestion and will not invoke AAR. You cannot invoke AAR
Hi Brian
I run an 1801 and since Mark¹s amendments with NEM it¹s made it a lot more
stable. I splashed out on the PoE board/power supply and it makes a nice
portable solution.
Best regards
Mick
E: m...@pobox.net.uk
T: +44(0)1626 323592
M: +44(0)77255 18156
F: +44(0)1626 323591
From: Brian
Hello,
Has globalization worked for anyone?
Thanks
On Tue, Oct 6, 2009 at 11:55 PM, ABIOLA ADEFILA adefilabi...@gmail.comwrote:
Hello,
Am working on lab 3 question 2.4
After creating the globalization, when i call i see the full E.164, when
the localization is applied i see 4 digits in
7970 does not support Globalization. If the phone model ends with a
1,2,4 or 5 it support Globalization. Models ending in a 0 do not.
--
Mark Snow
CCIE #14073 (Voice, Security)
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto:
HQ Ph1 (SIP)HQ Ph 2(SCCP) when I put the phone on hold there is MOH ,
I have Sub and Pub MOH in MRG and then MRGL is applied to DP-HQ which is
applied to both phones.
*Question 1 :*
shows on Pub :---
admin:show perf query class Cisco MOH Device
==query class :
- Perf class (Cisco MOH Device)
Thanks Mark, that makes it easy.
From: ms...@ipexpert.com
To: adefilabi...@gmail.com
Date: Tue, 6 Oct 2009 20:41:42 -0400
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Globalization and localization
7970 does not support Globalization. If the phone model ends with a
Both moh servers, although coresident on each UCM server, are
registered to the SUB based on the ccm group assigned to the device
pool of the moh servers.
Vik Malhi - CCIE#13890
Senior Technical Instructor - IPexpert Inc
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto:
Works on mine. Make sure the firmware is at least 8-4-1. I think I had a
stuck phone once on a slightly older firmware and localization wasn't working.
Put it back to CCM7's 8-4-1 and it works.
Try upgrading the firmware to 8-4-1 or newer.
From:
Thx Vik for quick response. So that means it is showing what is supposed to,
right ?
Also can you shed some light on my another question aksed here pls...
*Question 2 :*
when I do show perf list class ?
Can't see Cisco MOH Device
Thx
V
On Tue, Oct 6, 2009 at 6:59 PM, vccie2010
You are missing your inbound pots dial-peer (incoming called-num .
direct-inward-dial)
Use show call active voice brief.
--
Vik Malhi CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join our free online
Show perf list classes is the command. Use the ? After show perf list.
--
Vik Malhi CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
Join our free online support and peer group communities:
. Hogan MCP,CCDA,CCDP, CCNA, CCNP, CCSP, CCAI
Yahoo ID: jhogan552000
AIM ID: jhogan55
MSN ID: jhogan55
ICQ ID: 257599283
Live Life And Do Not Kill Time.
-- next part --
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20091006
Thankyou very much Vik and Abiola.
On Tue, Oct 6, 2009 at 6:59 PM, vccie2010 vccie2...@gmail.com wrote:
HQ Ph1 (SIP)HQ Ph 2(SCCP) when I put the phone on hold there is MOH
, I have Sub and Pub MOH in MRG and then MRGL is applied to DP-HQ which is
applied to both phones.
*Question 1 :*
Just to add to this thread- BACD was covered quite heavily in the CCIE-V
techtorial at Networkers. As a result we have included this in our labs.
--
Vik Malhi CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
25 matches
Mail list logo