Hello,
According to the last debug, your call is looping in the pstn ie, call hits
dial peer 100, then it hits dial peer 800, then the pstn sends the call back
to the br2 gw and call finally hits 32143003 dial peer (mva service), so
that leaves you with no channels available if you are working wit
Hello,
Still can get this to work
On Tue, Dec 1, 2009 at 4:14 PM, Omotayo wrote:
> hello,
>
> my MVA number is 32143003. when i dial it
>
> i get propted my remote destination number and pin which i enter as follows
>
> 2123942123#12345#1
>
> when i dial 900916745738932#
>
> my debug voice di
Do not assign the Css to the profile. Assign the css to the phones
Sent from my iPhone
On Dec 3, 2009, at 5:49 PM, Omotayo wrote:
> Hello,
> am working on the technology labs
>
> i have configured extension mobily for hq phone 1 and br1 phone 1
> phones
>
> hq phone 1 can dial 911 and local l
Hello,
am working on the technology labs
i have configured extension mobily for hq phone 1 and br1 phone 1 phones
hq phone 1 can dial 911 and local lines
when i log into br1 phone 1 as hq phone 1, i cant make the 911 and local
calls
what do i do to fix this
thanks
_
First off, check connectivity between the two servers make sure
there isn't anything blocking them...
Are they colocated, or across a WAN?
Once you have verified this, reboot the publisher...
Once the publisher comes back up and all services are started wait 15
minutes and reboot the subscr
>From the Publisher CLI, try running "utils dbreplication status" to
check the status of the DBreplication process. You may need to do a
"utils dbreplication repair".
You should also be able to get a report from Cisco Unified Reporting on
the current replication status.
Earl Hough CCIE #16
Hello,
Whenever am configuring from the subscriber, i always get this error
Error: [3807] Database communication error. Please check log file
Guess its a synchronization issue
what can i do to permanently fix it
thanks in advance
___
For more i
Yes to the troubleshooting being fairgame, and you can also expect any
variation for scripting, I would recommend the advanced scripting training,
or practice some custom scenarios, the ones that IPExpert details are a good
measure of what to expect.
On Thu, Dec 3, 2009 at 3:30 PM, akash patel wr
I understood from previous blog/post that UCCX will be pre integrated with UCM
in the lab, however we will be expected to troubleshoot the integration. I can
take help from SRND,
however as far 2nd piece of UCCX which is scripting, what material do you
recommend to study?
Is there any docu
Unless otherwise specified you should be able to use either method
On 12/3/09, Bas Janssen wrote:
>
> Hi,
>
> Today I run into the same issue.
>
> SCCP phones (simulates virual POTS?) registered to CME works fine, SIp
> phones don't. I made a sniifer trace and noticed that CME always uses fast
That is perfect! Thank you very much.
--- On Wed, 12/2/09, Hawkins Jason L NGA-ES USA CTR
wrote:
From: Hawkins Jason L NGA-ES USA CTR
Subject: RE: [OSL | CCIE_Voice] Mobile Connect Timer Fields
To: "Ken Kov" , ccie_voice@onlinestudylist.com
Date: Wednesday, December 2, 2009, 12:36 PM
Have yo
Hi,
Today I run into the same issue.
SCCP phones (simulates virual POTS?) registered to CME works fine, SIp phones
don't. I made a sniifer trace and noticed that CME always uses fast start
outbound. In the SIP case CME is indeed not sending TCS. So instead of
switching off "Wait for.." I ena
Hello,
The feature is supported, no configuration is needed to enable it
systemwide, just make sure the softkey is included in the phones you want to
activate the feature,
The document where you may find more information related to this feature is
the cme config guide,
(callback feature descripti
13 matches
Mail list logo
