Jeff,
If you telnet to the 2511 and console onto the router and then session into
the cue you can do this:
Ctrl-shift-6 x [to 2511]
Ctrl-shift-6 ctrl-shift-6 x [to router]
Ip unnumbered cmd will work unless the chosen interface is not correctly
configured. Is the interface line protocol down? (s
Classification: UNCLASSIFIED
Caveats: NONE
Got the answer to #1 - use the "exit" command instead of Ctrl-Shift-6
and then x. Takes you back to the router.
---
Jeffrey T. Girard ("Jeff")
COL, 53
Future Forces Integration Directorate (FFID),
Classification: UNCLASSIFIED
Caveats: NONE
Using my own hardware, 2811 with AIM-CUE module as service engine 0/0.
I am accessing all of my hardware via a 2511 terminal server.
So, first question - how do I get out of my CUE module? I understand
the I have reverse telnet'd to the CUE from the 281
Hello Jason,
It seems that according to your tests, partial matching of CLID is not
working as we might expect, If it was working right what would be the
function of "Number of Digits for Caller ID Partial Match" parameter? it
seems that no matter the number you set there, a full CLID match is sti
I would hazard a guess that default settings will suffice should there be
nothing defined.
Just remember what is important re: DHCP.
* helper-address on layer 3 voice interfaces.
* single dhcp server per subnet
* stop csa when the ucm server is being used as the dhcp server
* option 150/66
* spe
All,
I am trying to find the "recommended" settings for the lease time, ARP cache
timeout, renewel and rebinding timers for the DHCP server on CallManager? I
realize there are different situation, remote branch, etc. but I am speaking in
terms of the lab. Should I put the lease time out a few d
I hadn’t seen Mark’s posting on using this technique to try and tunnel traffic
via Internet Connection Sharing. Vik just posted that he also found this to be
basically unusable.
I don’t think you will be able to use a 26xx series router for this. IIRC, it
requires a feature which is not av
I had connection sharing working a while back on my XP machine and
determined it is unusable. While phone registration worked establishing
audio on answer was something I could never get working (I admit I did not
have the inclination to spend much time to fix this).
If you are having problems wit
Earl,
I really appreciate your response. I am using IP blue and CIPC as of now.
I ended up buying two hardware phones, because Mark Snow had post a blog (link
below) to work around for using hardware phones using ICS on Soft VPN, which
of-course was not well tested I assume.
http://blog.i
Akash,
If you are referring to the Cisco Remote Access Software VPN client, no
- this will never work. The software VPN client only provides an IPSec
tunnel form the endpoint it is installed on to the terminating VPN
device. It cannot be used to tunnel other traffic. The only way you
will be
has anyone got this (hardware phone using soft VPN) working? I have two 7961
phones and been struglling to get them up using soft VPN to proctorlabs, but
phones are not getting anything (tftp response) from the server.
Thank you___
For more information
11 matches
Mail list logo
