Re: [OSL | CCIE_Voice] Help with hware transcoding......

All of your dialpeers use the same codec. you have to hard set the incoming and outgoing dial-peers, to use g729 on one side, and 711 on the other side. this is what triggers transcoder invocation in CUBE. -Pete On Sun, Jan 3, 2010 at 10:39 PM, Paul Dardinski wrote: > All, > > > > Maybe I have b

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

That's what I thought, I am still getting the same error "Can not connect to IP Phone Agent service" anyone seen this before pls ? --- On Mon, 1/4/10, Peter Slow wrote: From: Peter Slow Subject: Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue To: "Anil Batra" Cc: "ccie_voice@onlin

[OSL | CCIE_Voice] Help with hware transcoding......

All, Maybe I have been staring at SecureCRT just too many hours..frankly need some help figuring out if I have a hardware issue or just a bonehead operator issue In essence, I simply cannot get the hware transcoder to invoke on calls. I definitely have a fully registered profile, sc

[OSL | CCIE_Voice] Cisco unity troubleshooting

 I configured unity connection but when I test the voice mail, it does not go to the voice mail, instead I get the message "hello unity cisco voice messagng system, and then it says no operator available at this time. leave a general message. Now I have not configured unity as an auto attendant.

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

no... the IPAgentInitial.jsp page will prompt you for that stuff even if you send the ID, Pwd and Ext parameters. On Sun, Jan 3, 2010 at 7:04 PM, Anil Batra wrote: > > I m not using "single button login" >  so do I still need to config ext and pass to > Make it work. > > Sent from my iPhone! > On

Re: [OSL | CCIE_Voice] isdn outgoing ie redirecting-number

Thanks a lot Peter! -Original Message- From: Peter Slow [mailto:peter.s...@gmail.com] Sent: Sunday, January 03, 2010 9:39 PM To: Robert McGhee Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] isdn outgoing ie redirecting-number You dont see it because your call isnt r

Re: [OSL | CCIE_Voice] isdn outgoing ie redirecting-number

You dont see it because your call isnt redirected =) when you hit the messages button, you're making a direct call. in all likelihood, your call is getting to the VM pilot with its full caller ID. unity is going to need to see the call as comign from the approriate 4-digit extension for it to recog

[OSL | CCIE_Voice] isdn outgoing ie redirecting-number

Hi All, I'm trying some variations to the IPX volume 2 labs and there's a section that requires a branch site to maintain voicemail functionality while in SRST mode (press the message button and get prompted for pin not userID). In the workbook they do this using an alternative

[OSL | CCIE_Voice] Home Lab - Minimum PVDM2's Needed

I am just getting started in my pursuit of the lab and I was curious what the minimum amount of pvdm2's at each site would be in order to successfully accomplish the labs on my home lab? I am using IPexperts lab manuals for V3. My home lab is basically setup like proctor labs with a few substitut

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

I m not using "single button login" so do I still need to config ext and pass to Make it work. Sent from my iPhone! On Jan 3, 2010, at 12:38 PM, Jonathan Charles wrote: It needs to point to UCCX back in the old CCIE V lab, the CCX and Pub were the same box... now they aren't... The URL

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

It needs to point to UCCX back in the old CCIE V lab, the CCX and Pub were the same box... now they aren't... The URL is right (assuming IP is right)... Is UCCX up? Did you create the Ext ID and Pwd parameters? On Sun, Jan 3, 2010 at 12:56 PM, anil batra wrote: > Intialy it wa pointed to "

Re: [OSL | CCIE_Voice] URL to GUI for CUPS (UNCLASSIFIED)

Hey Jeffery, See if one of these links has what you're looking for. http://docwiki.cisco.com/wiki/Cisco_Unified_Presence%2C_Release_7.x http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_Configuration_and_Maintenance_of_Cisco_Unified_Presence Amp ___

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

Intialy it wa pointed to "CMPub" when it showed " Requesting." but whne I pointed it to "UCCX" it shows..."Can not connect to IP Phone Agent service"   - So I beleive first I was wrong pointing it to CMPub...where actually it should be pointed to UCCX right?   - Not able to follow why after

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

OK, do the xx's point to CUCM or UCCX? On Sun, Jan 3, 2010 at 12:21 PM, anil batra wrote: > oopss...here we go please : > > http://xxx.xxx.xxx.xxx:6293/*ipphone*/*jsp*/*sciphonexml*/*IPAgentInitial* > .*jsp* > > --- On *Sun,

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

oopss...here we go please :   http://xxx.xxx.xxx.xxx:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp --- On Sun, 1/3/10, Jonathan Charles wrote: From: Jonathan Charles Subject: Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue To: "anil batra" Cc: ccie_voice@onlinestudylist.com Date:

Re: [OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

You forgot the URL Make sure it is pointing to UCCX... Jonathan On Sun, Jan 3, 2010 at 12:00 PM, anil batra wrote: > Trying to invoke the IP Phone Agent Services and the phone shows > "Requesting" and nothing happens. I have the following URL for IP phone > agent service. > > Any help w

[OSL | CCIE_Voice] UCCX - IP Phobe Agent Service Issue

Trying to invoke the IP Phone Agent Services  and the phone shows "Requesting" and nothing happens. I have the following URL  for IP phone agent service.   Any help will be highly appreciated...   Thanks, Anil ___ For more information regard

[OSL | CCIE_Voice] CUCM Connectivity Issue - Proctor Labs

I am experiencing an odd connectivity issue. I will be connected into Proctor Labs working away at the routers, 3750 switch, and CUCMs. Then, all of the sudden, I will lose my ability to connect to the CUCM webpages. On further investigation, it seems that the route to 10.10.210.0/24 subnet i

Re: [OSL | CCIE_Voice] BACD problem in CME

BACD gives these normal errors. Have you tried it? Does it work? I suggest ignoring the errors until you try it to see if it works. Brian Sent via BlackBerry from T-Mobile -Original Message- From: "A. Venkatesan" Date: Sun, 3 Jan 2010 20:31:10 To: Subject: [OSL | CCIE_Voice] BACD

[OSL | CCIE_Voice] BACD problem in CME

Hi all, Can some one help me to sort the issue please?   While i am entering the command in CME router for BACD i am getting the following error BR2-RTR(config)# application BR2-RTR(config-app)# service aa flash:app-b-acd-aa-2.1.2.2.tcl   paramspace english index 1   param number-of-hunt-grps 2  

[OSL | CCIE_Voice] CCM and CME-SRST issue

Dear All , I have a CCM version 7.0 on site A and two H.323 Voice gateways on site B , the connection between Site A and site B is a VPN on the Internet and we used the two VG as CME in case of the VPN down (CME-SRST) ,but I face a problem that the Phones take a long time to register on the CME

Re: [OSL | CCIE_Voice] CUCM 7.X Auto Registration issues...

Try stopping the ccm service on your SUB and see if the phones can register okay. This is a lab deployment, correct? It sure looks like a replication issue to me, even though the cucm isn't reporting one. Brian Sent via BlackBerry from T-Mobile -Original Message- From: Alex Hannah D

Re: [OSL | CCIE_Voice] CME SIP phones

Hi Debug tftp events shows the correct files being downloaded infact that was the debug included with my mail. The SIP upgrade has worked fine unfortunately the phones won't register with the cme. Peter -Original Message- From: bkvalent...@gmail.com [mailto:bkvalent...@gmail.com] Se

Re: [OSL | CCIE_Voice] CME SIP phones

You might want to make sure you have all the necessary configuration files served up via tftp. Also try running "debug tftp events". Also, try upgrading it using CUCM, , which is faster and more reliable that doing so via CME. Sent via BlackBerry from T-Mobile -Original Message- Fro

Re: [OSL | CCIE_Voice] CUCM 7.X Auto Registration issues...

Alex, are you using used phones? If yes, they might have been used in a secured cluster and the phones will registger nowhere else. Perform a factory reset and try again. regards, Thomas -Ursprüngliche Nachricht- Von: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@o

Re: [OSL | CCIE_Voice] CUCM 7.X Auto Registration issues...

Hi Alex I have had similar issues on earlier versions of Call manager but I haven't always been able to explain what happens. I think you may need to point the option 150 to the subscriber and not the publisher. If this is just a test installation the try a manual config of the phone as a che

[OSL | CCIE_Voice] CME SIP phones

Hi A similar problem to one already posted but the suggestions I found in the achieve don't appear to work. My 7960 has come up as a SIP phone but it keep downloading its configuration file every few seconds. There doesn't appear to be a dhcp issue the sccp phone is fine and the lease time is

[OSL | CCIE_Voice] CUCM 7.X Auto Registration issues...

Guys, I have a CUCM 7.x cluster ( 7.1(2) ) with a Pub and a Sub with the Sub being the primary server for phones to register to via the CM Group, and auto registration is turned on for the Sub. DHCP is running on the Pub, the phones get an IP Address, and download the firmware fine, when they att

[OSL | CCIE_Voice] Volume 1 Lab 2

Hi! I have some issues with ringing between HQ and BR1. When I ring 1002 from 5002 the calls goes through but when I answer the call it continues ringing on 5002 whilst 1002 assumes it is connected. After a short while the 1002 resets and tells me that the Call manager is down. Any suggestio

[OSL | CCIE_Voice] CUCM 7.1(2) - Apply Config Button?

Guys, I have a very stupid question regarding CUCM 7.1(X) and the new "Apply Config" button. In regards to phones... if you configure the device then the line on a phone, what the heck is the difference in "resetting" vs "apply config"? It looks to me after reading the description of the apply c