Hello All,
Am working on lab 4
i have integrated the UCM to CUE. Everything shows registered
end
CUE# show ccn status ccm-manager
JTAPI Subsystem is currently registered with Call Manager: 10.10.210.10
JTAPI Version: 7.0(1.1000) -1 Release
when i dial the pilot number 3600, i get a busy tone
Hi,
Not that I've looked at Lab 4 yet (i'm assuming the second workbook) but you
need to use G.711 as CTI Ports do not support G.729.
Regards,
Mike.
On Thu, Jan 7, 2010 at 8:40 PM, Omotayo adefilabi...@gmail.com wrote:
Hello All,
Am working on lab 4
i have integrated the UCM to CUE.
Hi Amp,
I plan to go to the second week, 22-26 of March, of this boot camp in San Jose
and before that I will attend the first week in Columbus on the 8-12 of March.
I haven't booked it yet, but according to Mike Down there are still available
seats. Plan to make up my mind within the next
I printed all my version 3 WB and PG, in duplex, without any issues in the
beginning of November last year. Without any need to hardcode it on the printer
display. I don't' know if the model if printer is in any way critical, but FYI
this is the make and model I used, KONICA MINOLTA Bizhub
Hey Roger,
I am all signed up and ready to go, just need to make hotel
arrangements. I was actually asking who will be attending the boot
camp because I wanted to see if anyone wanted to share the hotel
expense costs.
Amp
Quoting Roger Källberg roger.kallb...@cygate.se:
Hi Amp,
I plan to
you need to configure a transcoding resource on Br2 router and enable
g729r8..also make sure your cti ports have visibilty to the resource.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi!
I have just set up a Unity Connection 7.1 together with CUCM 7.1 and I am
experiencing problems with sending Calls to voice mail.
Voice mail mask is set to . Extension length is 4 digits.
I can ring the voice mail pilot from a telephone configured for VM and get the
correct greeting.
I did some testing and seems like the display on the phone is always what
the RP is. No matter you change it on the RG or not. Remember the display is
the called number. THe only time i was able to change the display number was
using called transformation but that in this case will break local
Does anyone know what UCCX version is in the lab- Standard, Enhance, Premium
thanks
_
Add your Gmail and Yahoo! Mail email accounts into Hotmail - it's easy
I believe it is premium
On Thu, Jan 7, 2010 at 5:42 PM, iptuser55 iptuse...@hotmail.co.uk wrote:
Does anyone know what UCCX version is in the lab- Standard, Enhance,
Premium
thanks
--
Have more than one Hotmail account? Link them together to easily access
Thanks, does that mean the lab could involve email queing, Db dips etc or is
it just Cisco focused?
Date: Thu, 7 Jan 2010 18:05:24 -0800
Subject: Re: [OSL | CCIE_Voice] What UCCX type
From: tanner.ez...@gmail.com
To: iptuse...@hotmail.co.uk
CC: ccie_voice@onlinestudylist.com
I believe it is
It *could* include anything related to UCCX, but I doubt there will be much
that is complicated.
On Thu, Jan 7, 2010 at 6:07 PM, iptuser55 iptuse...@hotmail.co.uk wrote:
Thanks, does that mean the lab could involve email queing, Db dips etc or
is it just Cisco focused?
All -
When comparing the Volume 1 PG Appendix A-B v6 511 1 PDF file with Cisco's
documentation, there seems to be a discrepancy. On page 165 of the IP Expert
document, it shows the following commands:
voice register global
mode cme
source-address 10.10.202.1 port 5060
max-dn 2
13 matches
Mail list logo
