Am I correct in my testing that Multicast over SIP trunk to a PSTN
connection doesn't work? (I hear dead air and my
MOHMulticastResourceActive = 1 ) I have the following setup and I am
unable to get PSTN MULTICAST MOH to work correctly, but Internal clients get
MOH. I have tested with and H32
Thanks Otto for yoru kind reponse, so let me put the question otherway ,
what should I do on the UCM and SiteB router if I was to use MOH from flash
and it shd be G729. Is this scenario possible please as we say on SiteB
router the IP address will be 239.1.1.3 and I think in this case all the
confi
Can someone please tell me what load to use for SIP on the CME for the Cisco
7941/61 phone model? I see 3 types of files to download, the .zip the .cop
and the .cop.sgn file on Cisco's site, but they all referance CallManager
only.
Bill
___
For more inf
Hi,
No, it's not, check your presence configuration for both cups and cucm,
there are many setting to check. I would start checking cups and cupc
health,
BR,
On Sun, Jan 24, 2010 at 4:41 PM, sean hurricane wrote:
> CUPS registration status shows unknown but client can make and receive
> calls a
Hi,
What they mean is that weight1 for the srr-queue bandwidth shape or
the srr-queue
bandwidth share commands are ignored in the bandwidth or ratio calculations,
HTH,
On Mon, Jan 25, 2010 at 4:44 PM, Shaaf Shah wrote:
> I had a similar question relating to the qos. Below is an example from SR
Hi Sergio,
Positive, that would be the correct configuration for the scenario you
mentioned, and it would be 5% of 306.8kbps [364.8kbps (mincir) - 58kbps (llq
priority bw)],
BR,
On Fri, Jan 22, 2010 at 3:23 PM, Sergio Polizer wrote:
> Hi,
>
> VOL 2 LAB3 Question 5.3 asks for "Use 5 percent of
Hi Otto, Sergio,
Thanks for the explanation and confirmation.
Regards,
Bas
Date: Mon, 25 Jan 2010 15:59:25 -0430
Subject: Re: [OSL | CCIE_Voice] QoS solutions in PG CCIE Voice v3. Vol. 2 Lab
2 6.3
From: o...@ipexpert.com
To: spoli...@hotmail.com; basmj...@msn.com
CC: ccie_voice@onlinestudyl
Hi,
The only format supported by the moh file is g.711, you should also take
care of the multicast ip address numbering to make it match to a g.711 moh
streaming not g.729,
BR,
,2010/1/22 Roger Källberg
> As far as I know you need to have the file(s) in the correct format in
> flash, ie G729
I would add to focus my studies for presence configuration (and for all
applications in general), on being specific on what is necessary to complete
a specific task, for example, if you were to configure desk phone mode only,
no sip trunk, inbound acls, line end user association, cupc endpoint cucm
Hi,
Presence and ucme integration is not currently supported, what you can do
right now is obtaining the blf status from a ucme system connected to a ucm
system via sip trunk and vice versa,
Please refer to ucme configuration guide for details,
BR,
On Thu, Jan 21, 2010 at 9:45 AM, Vccie Vccie w
I had a similar question relating to the qos. Below is an example from SRND
where the first queue is limited to 1/3 of the available bandwidth and then the
Q1 is enabled as priority queue with teh "priority-queue out" command. But IOS
reference guide for 3560 says that if we enable "priority-que
Hello Cristobal,
I would recommend the following reading so you can make the better decision
according to your environment:
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/srnd/design/guide/multcme.html
HTH,
On Wed, Jan 20, 2010 at 1:34 PM, Cristobal Priego wrote:
> Hello all,
>
>
Hi Bas, Sergio,
I agree, although the internal dscp to cos map should be used to deduct the
cos value and hence the queue and threshold values through the "mls qos
srr-queue output cos-map queue" settings, the SRND states (as Sergio
noticed), that "mls qos srr-queue output dscp-map queue" setting
I agree. Third bullit should be "srr-queue bandwidth shape 10 2 5 5"
And If We use "auto qos" maybe We should map dscp-map queue as well. According
QoS SRND (2-58), "DSCP-to-Queue/Threshold maps override CoS-to-Queue/Threshold
maps". Or "no mls qos srr-queue output dscp-map".
May Someone give
Interesting read
In response to growing demand for highly qualified professionals capable of
designing, implementing, securing and operating increasingly sophisticated
networks and technical infrastructure, Cisco today announced a new Service
Provider (SP) Operations certification track as well as
Hi,
according to what I have been able to understand you will get these versions in
the lab.
CUCM 7.0.1
CME 7.0.1 (IOS 12.4.22T)
UC 7.0.1
CUPS 7.0
UCCX 7.0.1
CUE 7.0
A pretty safe bet is that the version used @ Proctorlabs will be the one that
we can expect to get in the lab.
Brgds,
Roger Käll
16 matches
Mail list logo