I am going to attend the IPexpert five day bootcamp in San Jose this coming
May. Would anyone be interested in splitting a hotel room to save some money?
Please let me know soon as I will probably start looking for deals this week.
I will also do the mock labs in June. If you'll be at that
Make sure you finish Vol 1 couple of times and attempt 1-2 labs from Vol 2.
Def a great bootcamp esp with Vik
On Thu, Mar 4, 2010 at 7:38 AM, Berry, Matthew J.
mjbe...@krollontrack.comwrote:
I am going to attend the IPexpert five day bootcamp in San Jose this coming
May. Would anyone be
Opps, the message bounce back due to the file size restriction.
Gang, you may request the capture log file from me if you willing to help.
Thanks.
Shingei.
-- Forwarded message --
From: ShinGei Yong shingei.y...@gmail.com
Date: Thu, Mar 4, 2010 at 10:02 PM
Subject: Re: [OSL |
When does the call fail? If it fails just after you pick up then please try to
add a voice-class codec list to your voip dial-peers that holds both g711 and
g729.
Roger Källberg
Från: Omotayo [adefilabi...@gmail.com]
Skickat: den 4 mars 2010 02:46
Till: OSL
I like the Cisco Press Book Troubleshooting Cisco IP Telephony, but it is
outdated. Does anyone know of a similar, more recent book that is recommended?
Thanks,
Ken
___
For more information regarding industry leading CCIE Lab training, please
There are none, but there is a 2nd edition of that book in the works.
On Thu, Mar 4, 2010 at 10:26 AM, Ken Kov kck...@yahoo.com wrote:
I like the Cisco Press Book Troubleshooting Cisco IP Telephony, but it is
outdated. Does anyone know of a similar, more recent book that is
recommended?
Hi Guys,
I was wondering if any one else had the same problem that I have with a
SIP phone registered with CME
CME version 7.0(1) on router 2821 running IOS 12.4(22) T3
Phone - 7962 running SIP load SIP42.8-5-3-4S
The SIP phone is registered with the CME. I can make calls /receive calls,
I
it fails before it gets to ring on the br2 phone. it gives calls can not be
completed as dialled
the calls gets to the br2 to gateway because i run the debug voice ccapi
inout
2010/3/4 Roger Källberg roger.kallb...@cygate.se
When does the call fail? If it fails just after you pick up then
Hi,
I have issues with the sip phone registering. it registers and keeps
deregistering and registering intermittently
On Thu, Mar 4, 2010 at 5:36 PM, iy...@nationwide.com wrote:
Hi Guys,
I was wondering if any one else had the same problem that I have with a SIP
phone registered with CME
Kalyan,
Please try to use a lower sip firmware load version for you cme, the one
that corresponds to your cme version 7.0(1), you may find this information
in the cme compatibility matrix,
Thanks,
On Thu, Mar 4, 2010 at 12:06 PM, iy...@nationwide.com wrote:
Hi Guys,
I was wondering if any
I asked this question to Cisco press late last year. I have asked again a
couple of weeks ago, but has yet to resieve a responce.
Hello Roger -
Thanks for your note. I've just checked with the corresponding marketing
manager for this title and, unfortunately, it is on indefinite hold for
the
Could you do a deb voip dialpeer and a deb voice translation on the BR2 gw and
post the output?
Roger Källberg
Från: Omotayo [adefilabi...@gmail.com]
Skickat: den 4 mars 2010 18:12
Till: Roger Källberg
Kopia: OSL Group
Ämne: Re: [OSL | CCIE_Voice] Calls from hq
Hello,
I want to configure SRST on BR2 router. Had configured everything, even the
phone goes into CM Fallback mode. When I test call from BR2 to PSTN 911, its
doing good. But when I call from PSTN BR2 number to BR2 phone, its not
ringing.
I had created voice translation profile at BR2 site and
Thats highly irritating.
I saw the book hit Amazon and was (according to the website) going to be
released in October of last year. It's quite a shame that this has been put
on hold. I wonder what the reason is.
2010/3/4 Roger Källberg roger.kallb...@cygate.se
I asked this question to Cisco
UCCX
=
11. the UCCX this time required 2 agents SB PH2 and HQ PH2.
The requirement was sending all calls coming from +44 to SB PH2.
All other call to normal queue
Please suggest
Thks
___
For more information regarding industry leading CCIE
More For Backbone Gatekeeper Troubleshooting section
We have a customer that places high call volume to UK resulting in high
cost.
In order to avoid high toll charges with these calls, the customer would
like to send the calls via the backbone
Hello Rakesh,
BR2 is a h323 gateway right?
Did you check the debug isdn q931? is the call hitting the GW? I am
sure it is but it doesn't know where to go in SRST...
You need to make a translation profile to strip DNIS to 4-digit
extension:
voice
translation-rule 1
rule 1 /^3214\(3...\)/
You have to wonder how much the speed of technology change and version release
occurring has to do with it. The core methods of analyzing and troubleshooting
an issue should still be used (always point your finger at the telco first,
right?), disconnect/cause codes are the same, but new
Hello,
we have a production voip implementation, with SIP carriers, 3 days ago we
were reported that MOH wasn't heard by the callers, they get silence and
that they can't transfer calls or if they place a call on hold, when they
try to resume it, it drops.
this is pretty much our topology
SIP
--
An HTML attachment was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20100304/5e8ebba
3/attachment-0001.htm
--
Message: 2
Date: Thu, 4 Mar 2010 07:26:37 -0800 (PST)
From: Ken Kov kck...@yahoo.com
Subject: [OSL | CCIE_Voice
Did the debug ccsip message gave you any indications as to why the calls
dropped? Do you have any registrations issues with HW/SW MTP or transcoders?
Have you tried restarting the Voice Media Streaming App service?
Jeff
From: ccie_voice-boun...@onlinestudylist.com
we did debugs on ccsip, voice ccapi inout,
rebooted the server, restarted tftp, voice media streaming app, no
registration issuew sith HW transcoder and MTP
this is driving me crazy.
we didn't make any change it was working until 5 days ago. i'll keep the
troubleshooting
2010/3/4 Jeff Knuckle
Hello Everyone
I am working with CUPC. I have two users and one works just fine but the
other one is disabled ALL the time. I have checked and checked the settings
between the working client and the non working client and I am not seeing a
difference.
I log in from the same laptop with the
All -
I have several theory questions that came up during my time spent in labs 5a,
5b, and 5c. I am hoping that some super smart CCIE candidates may have found
the answer to these questions.
Roger and Ossamah, I'm looking to you guys to represent. :)
1. How do you source RAS messages
24 matches
Mail list logo