Hello All,
Worked on Lab 7 question 3 - DISA daling. i had two issues with this section
while working on it;
Q3.3. i configured conference resources on the br2 gateway and applied to
the BR2 Device pool. While the phone is In Remote Use . Also applied
CBarge on the BR2 phones.
On pressing the
Hello All,
On Lab 7, after integrating the UCM with the UC using SIP. Pressing the
subscriber button, i get the personal greeting message
But, when pstn or a local call dials hq phone 2 or br1 phone 2, i hear Hello
Cisco unity connection messaging system from a text tone phone.
Any
On Wed, Mar 17, 2010 at 06:42, Kevin Chin sei.lo...@gmail.com wrote:
does current BLS student need to pay to have this vlab?
Hi, I think it's the best that you contact your Training Advisor about that.
--
Marko Milivojevic - CCIE #18427
Senior Technical Instructor - IPexpert
YES! We include
Hi there,
What about the people who already bought BLS ???
Are there any oppurtunities for us?
17.03.2010 07:46, Tyson Scott yazm?s,:
But wait haha. Thanks Marko.
Regards,
Tyson Scott - CCIE #13513 RS, Security, and SP
Technical Instructor - IPexpert, Inc.
Mailto:
It depends when you purchased and what price you paid.
As you see - the price went up, slightly and there will be no
discounts due to the massive amounts of content, support and freebies
included.
You WILL have access to the free OEQ eBook and also access to our
vLectures and Ask the
Ok thanks,
--
Dew Swen
CCVP, CCNP
17.03.2010 15:13, Wayne Lawson yazmış:
It depends when you purchased and what price you paid.
As you see - the price went up, slightly and there will be no
discounts due to the massive amounts of content, support and freebies
included.
You WILL have
Question: Ensure if nobody within huntgroup is available to answer call,
the caller hears subscriber greeting for br1-phn2
Config below:
telephony-service
srst mode auto-provision all
srst dn line-mode dual
em logout 0:0 0:0 0:0
max-ephones 2
max-dn 10 preference 8
ip
Hi Earl:
I suppose that the music-on-hold.au file loaded at flash should be g729
formatted for this case? (and also gw and ccm are configured correctly for g729
codec)
But my question is: If you are playing moh from router and it is playing only
localy, why should you want to play moh
I was just testing in my lab. I also see that the router is sourcing music on
239.1.1.3 when I do a show IP mroute, however I just hear silence. I also
believe Mark Snow indicates on VOD you can tftp g729 music file from UCM to
router flash and use that.Not sure how to locate the file
In this case, there were region limitations which forced me to provide
MOH for PSTN users, but the actual gateway was remote to the site,
because there were no local PRIs. Therefore, to save bandwidth, G729
was used for the VoIP leg to the H323 gateway. Agreed, normally if the
gateway were local
Any one with a fix on this?
On Wed, Mar 17, 2010 at 9:09 AM, Omotayo adefilabi...@gmail.com wrote:
Hello All,
Worked on Lab 7 question 3 - DISA daling. i had two issues with this
section while working on it;
Q3.3. i configured conference resources on the br2 gateway and applied to
the BR2
Hi,
MOH server should be placed in your case in site A, as this is where the MOH
server is located. Phones from remote locations will still be using the site
A moh service using the codec defined in the region relationship between
the phone and moh server, which in most cases will be g.729 if
Hello,
Any ideas?
On Wed, Mar 17, 2010 at 9:54 AM, Omotayo adefilabi...@gmail.com wrote:
Hello All,
On Lab 7, after integrating the UCM with the UC using SIP. Pressing the
subscriber button, i get the personal greeting message
But, when pstn or a local call dials hq phone 2 or br1 phone 2,
Hello,
i meant to say i put all the software conference brige in a device pool that
is not assigned to any user
thanks
On Wed, Mar 17, 2010 at 9:09 AM, Omotayo adefilabi...@gmail.com wrote:
Hello All,
Worked on Lab 7 question 3 - DISA daling. i had two issues with this
section while working
Thank you very much Naoufal.
Just wondering if I missed a document where all this is mentioned (I wonder if
I really missed one or its just not there)
Regards
Wilson Samuel
-Original Message-
From: kerboute naoufal [mailto:nkerbo...@gmail.com]
Sent: Wednesday, March 17, 2010 11:33 AM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/7_1_2/t16taps.html
On Wed, Mar 17, 2010 at 10:42 AM, wilson.sam...@usc-bt.com wrote:
Thank you very much Naoufal.
Just wondering if I missed a document where all this is mentioned (I wonder
if I really missed one or its just not there)
Hello
Jeff:
Use this procedure to download moh file from UCM:
http://pushkarbhatkoti.wordpress.com/category/ccm-5x-6x-7x-stuffs/how-download-moh-file-from-ccm5x-6x-7x-server/
Earl:
I remember that sometime ago I tried to do the same but with no luck, I was
using the standard
Hello,
I am trying to multicast MOH from router flash and was wondering if there is
any way to verify live MOH feed when a call is placed on hold on the Proctorlab
Racks.
According to Proctorlabs there is no way to hear MOH trough Multicast because
of the the EzVPN (IPSec) connection...
So
yes i applied the mgl to the br2 device pool
On Wed, Mar 17, 2010 at 9:20 PM, Peter Slow peter.s...@gmail.com wrote:
do you mean device pool or MRGL? No CFB means CUCM couldnt select a
CFB from the MRGL it was using for selection.
-Peter
On Wed, Mar 17, 2010 at 10:46 AM, Omotayo
Iwan,
Instead of pressing hold on the BR1 phone, press hold on the HQ phone and
see if the results below are different. You could also test this by calling
the PSTN phone and view your output.
HTH,
---
Amy Ryan CCIE #24677 (Voice)
Technical Instructor - IPexpert, Inc.
Mailto:
Hello All.
I am experiencing the following behavior:
I place a call out of the Brach 2 site, internationally into the HQ site, the
PSTN sends the call into HQ as national.
If I place the call from the PSTN phone international line (India or Spain)
into the HQ site, the call comes in correctly
Jean,
Are you using Proctor Labs or your own lab? The PSTN router should take care of
the calling number type.
You should also make sure you don't have any translation patterns on the BR2
gateway that would modify the type. Also check your H323 gateway to ensure the
same thing.
- Sent from my
I've seen this discussed quite a bit. I have had it working, but after
another attempt from scratch I am able to dial the DID from a remote
destination, I get the 'welcome' message, then after a few seconds the
call disconnects. If I call from a non-remote destination I get the
prompt to input my
On a side note SNR works to the same remote destination from the same
phone, so I would imagine my partitions and CSS's are correct...
Sent while mobile.
On Mar 17, 2010, at 19:09, Jason Granat j...@slash128.com wrote:
I've seen this discussed quite a bit. I have had it working, but after
That's correct. When the call is delivered to the HQ gateway it is seen as
national from the perspective of the terminating ISDN.
From the standpoint of HQ, the 212 is national type. If it was a local PRI from
a local LEC, I might expect a subscriber type, but itd be most common to
receive a
How many seconds go by? Could you be hitting the T38 timeout value? Perhaps
something with call capabilities are not being setup?
- Sent from my Blackberry
- Original Message -
From: ccie_voice-boun...@onlinestudylist.com
ccie_voice-boun...@onlinestudylist.com
To: Jason Granat
10 seconds on the nose every time. Isn't T.38 for fax?
Sent while mobile.
On Mar 17, 2010, at 19:20, Berry, Matthew J.
mjbe...@krollontrack.com wrote:
How many seconds go by? Could you be hitting the T38 timeout value?
Perhaps something with call capabilities are not being setup?
- Sent
Sorry. Thinking of wrong term.
Sounds like capabilities are not being established. Are you using h323 fast
start?
- Sent from my Blackberry
- Original Message -
From: Jason Granat j...@slash128.com
To: Berry, Matthew J.
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Agreed! What a waste of email bw talking about this.
On 3/16/10, Jeff Garvas j...@cia.net wrote:
We commonly perceive the OEQs to be a cheat gate. Cisco is saying if
you've taken their course you're obviously not cheating because you took
officially approved training. Just look at the number
unsubscribe
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I find it interesting people constantly bring up 'fair' or 'cheating'
when referring to this change. Why? Do you not have the same
opportunity to go take the 360 program and get this waiver, and
possibly the additional 30 minutes?
As the saying goes, All is fair in love and war. And this is war,
31 matches
Mail list logo