Hi folks,
My question is how Can I test below feature, (I mean testing and is there
any command I am missing)
When Ph-1 line 4001 is on the phone we should see the status of this call in
the local directory of Ph-1.
My config is below,
!
telephony-service
sdspfarm units 2
sdspfarm transcode sessi
hi kobel,
I load other image for Unity and configure as usual (left message and voice
mail is working fine)
So I am not sure, if this is image issue or configuration issue.
Note: Hi Vik and teams (proctorlabs) , Can you give us a clue if this is
image issue or config that we need to t
If you press the remote-in use button and you are into conference, it means
you are using single button cbarge.
If you are presented with a remote-in-use softkeys when you press the button
and you have to select cbarge softkey. It means you are using normal cbarge
On Sun, Aug 8, 2010 at 4:23 AM, M
its not used with isdn backhaul, only for analog and cas trunks. thats why
you never needed this :) with bachaul you dont need to configure any dial
peers.
regards
--
Sent from my mobile device.
On Aug 8, 2010 2:31 AM, "Matthew Berry" wrote:
Guys -
I need some clarification on MGCP configurati
Guys -
I need some clarification on MGCP configuration for SRST. Looking through
Cisco documentation, I see the following snippet from time to time:
application
global
service alternate Default
In my studies the past year, I have never used those commands and my testing
has always worke
In UCM how do you determine whether you are assigning single button cBarge or
normal cBarge?
On Aug 7, 2010, at 9:35 AM, cisco voip wrote:
> That bug is for srst mode auto provision none.. for provision all, it should
> work
>
> The problem you are facing of having cbarge for split second is
Take a look at detailed smtp traces on cuc. Please paste them and i can help.
Sent from my phone
On Aug 7, 2010, at 10:43 AM, Erwan Erwan wrote:
> yes, i use prcotor lab
>
> mx record is on DNS
>
> --- On Sat, 8/7/10, Miron Kobelski wrote:
>
> From: Miron Kobelski
> Subject: Re: [OSL | CC
I have not played with it on cme but i know for sure it cannot be changed in ccm
Sent from my phone
On Aug 7, 2010, at 11:44 AM, Trying 2nd CCIE wrote:
> Hi guys,
>
> I've noticed that when CUCM is up and cbarge is used, the words "To
> conference appear on the phones. However, when the site
Here's the best place to start. There's a good section on interpreting
traces. The book is a bit dated but keep in mind the SDI and SDL trace
formats have not changed too much.
Warren
http://my.safaribooksonline.com/1587050757
Warren Heavisidewheav...@cisco.com
ENGINEER.CUSTOMER SUPPORT
Hi Kobel,
Seem this is only happen when i use image Lab 1 Bootcamp from proctorlabs.
maybe that is somethng they put to test troubleshooting, will confirm it today
at my session. Sure will update you
tks
--- On Sun, 8/8/10, Miron Kobelski wrote:
From: Miron Kobelski
Subject: Re: [OSL |
I'm curious. I've been reading about the command "mgcp timer
receive-rtcp" and that I need to remove it (via "no mgcp timer
receive-rtcp") when streaming multicast MOH from the flash of an MGCP
gateway. I'm doing VOL1 lab1 today and task 6.1 has us do just that.
I tried it from BR1, my MGCP gatew
RTMT,
This is good suggestion to use,
ssh to sub/pub and issue:
admin:file tail activelog /cm/trace/ccm/sdi recent
My question is how we can read this file it is too long what section we have
to focus on.
Any suggestion please,Thanks
On Sat, Aug 7, 2010 at 12:00 PM, wrote:
> Send CCIE_Voice m
Hi guys,
I've noticed that when CUCM is up and cbarge is used, the words "To
conference appear on the phones. However, when the site goes to SRST, it
shows "To Barge" instead of "To Conference" Can anyone help to make the
display consistent in both CUCM and SRST mode?
thanks and best regards
On
The scenario specifically involves using auto-provision none. Have you tested
and verified this?
On Aug 7, 2010, at 9:35 AM, cisco voip wrote:
> That bug is for srst mode auto provision none.. for provision all, it should
> work
>
> The problem you are facing of having cbarge for split second
That bug is for srst mode auto provision none.. for provision all, it should
work
The problem you are facing of having cbarge for split second is because you
had single button cbarge when phones were registered to CUCM, disable that
setting and make it normal cbarge, they will start to work in srs
I meant: System Settings > Advanced > Conversation > Full Mailbox Check for
Outside Caller Messages
That was my lead, but I've just checked CUC docs regarding quotas:
Quota Handling for Outside Caller Messages
By default, if an outside caller attempts to send a message to a user whose
send/rece
you have to learn how to troubleshoot .. ;)
just change the http://cco/en to http://cisco.com/en etc..
On Sat, Aug 7, 2010 at 7:20 PM, Ashar Siddiqui wrote:
> Hi Warren,
>
> This is what I am getting:
>
> Page Not Found (404 Error)
>
> RTMT could not be located.
>
>
> Warren Heaviside (wheavi
Hi Warren,
This is what I am getting:
Page Not Found (404 Error)
RTMT could not
be located.
Warren Heaviside (wheavisi) wrote:
Here's a place to start with RTMT.
http://cco/en/US/docs/voice_ip_comm/cucm/service/7_1_2/rtmt/RTMT.html
Warren Heavisidewheav...@cisco.com
ENGINEER.CUSTOM
Here's a place to start with RTMT.
http://cco/en/US/docs/voice_ip_comm/cucm/service/7_1_2/rtmt/RTMT.html
Warren Heavisidewheav...@cisco.com
ENGINEER.CUSTOMER SUPPORT
High Touch Technical Support
Phone: +1 408 853 7995
Office Hour 9 am - 5 pm Pacific Monday - Friday
For corporate legal inform
what quota setting, u mean related to mask setting?
--- On Sat, 8/7/10, Miron Kobelski wrote:
From: Miron Kobelski
Subject: Re: [OSL | CCIE_Voice] Unity message issue
To: "Erwan Erwan"
Cc: ccie_voice@onlinestudylist.com
Date: Saturday, August 7, 2010, 2:49 PM
hi,
i've seen this too a
yes, i use prcotor lab
mx record is on DNS
--- On Sat, 8/7/10, Miron Kobelski wrote:
From: Miron Kobelski
Subject: Re: [OSL | CCIE_Voice] VPIM issue CUE to Unity
To: "Erwan Erwan"
Cc: ccie_voice@onlinestudylist.com
Date: Saturday, August 7, 2010, 3:00 PM
do you have mx records on th
Hi All
I am facing an issue with calling from my PSTN to HQ-RTR. I am doing the
Vol2-Lab1. This is the error I receive on the PSTN Router with ''Debug isdn
q931'':
*
ISDN Se0/3/0:23 **ERROR**: CCPCC_CallOrigination: SETUP timed-out (2nd T303)
*I don't even receive any setup request on the HQ-RTR.
do you have mx records on the dns server?
regards
--
Sent from my mobile device.
On Aug 7, 2010 6:52 AM, "Erwan Erwan" wrote:
hi,
I try to config VPIM by these steps :
CUE
---
Location ID : 34
Location Name : br2
Domain Name : cue.com
Location ID : 212
Location Name : uc
Do
23 matches
Mail list logo
