Hi Experts:
When I redial a HQ missed call (+1408XXX) on Br2 Ph1 (International)
, HQ Phone is recieving the call, I am able to pickup but in few seconds
I get fast busy tone on Br2 Ph1.
Path is as follows:
Br1 Ph1 - Br1 RTR RAS - CUCM Xlation to 9XXX - HQ local GW - HQ Ph1
I also
On the GK Trunk in CUCM, uncheck Wait for Far End H.245 Terminal Capability
Set
On 18 November 2010 11:44, Shrini linuxbos...@gmail.com wrote:
Hi Experts:
When I redial a HQ missed call (+1408XXX) on Br2 Ph1 (International) ,
HQ Phone is recieving the call, I am able to pickup but in
Volume 2 LAb 4,
I'm praticing Globized and localized call routing but I think there may be a
mistake on the PSTN Router/Phone
Router
here is an IDSN Q931 output
I dial from the PSTN phone Line 2 HQ-NYC +1212 394 2123
3945002
Which is HQ phone 2 Ext 5002 (this is a local call).
Nov 18
Hi guys,
Yesterday when I was in the lab I had a problem like that.
In CME sccp phones had SIP firmwire which I corrected by registering them to
CUCM as SCCP
(I followed the way which Matthew and Chevy said). There was no problem with
SCCP phones.
However, one of the SIP phones (7960-directly
Hello everyone,
I need to configure my ASA (instead of the norm of using the EZVPN via a
router) to the IPExpert Lab Rack so that I can register my home phones.
Has anyone been able to do this successfully and can share some info on how to
achieve the same?
Regards,
Rohan
Hi Roger,
I tried as suggested by you. No luck, still same.
Thanks
Shrini
On 11/18/2010 2:18 AM, Rogers Ochieng wrote:
On the GK Trunk in CUCM, uncheck Wait for Far End H.245 Terminal
Capability Set
On 18 November 2010 11:44, Shrini linuxbos...@gmail.com
mailto:linuxbos...@gmail.com wrote:
Experts,
does anyone run in to following error on proctorlabs br2-rtr router.
Pool: Processor Free: 1442660 Cause: Memory fragmentation
Alternate Pool: None Free: 0 Cause: No Alternate pool
-Process= CC-API_VCM, ipl= 0, pid= 305, -Traceback= 0x418DEBD8 0x4011E8EC
0x40124934 0x40124F04
Hi Shrini,
yes I wrote the id mac correctly. I entered create profile command
every time I changed the configuration. But I didnt wrote no create
profile. Does it make sense?
On 11/18/10, Shrini linuxbos...@gmail.com wrote:
Have you specified id mac under voice register pool of the phone ?
Hi Dew,
1. no create profile
create profile
After you add DNs and pools run create profile again under global.
2. debug tftp events
rese the phone and see what it is requesting and is it succeeding.
Else finally
In the flash: you see below files.
6 3579 Apr 01 2002 16:18:18
Hello Group,
I am working on getting a home lab setup to practice for the IE voice lab.
I have almost enough equipment to setup all 3 sites with the exception of
the 4 router to either run the PSTN or Branch site. I have plenty of DSPs
and MFT voice cards but short 1 router. I am researching
Is it a SIP or SCCP phone that you are dialing from? Have you tried to add
a MTP to help w/ supp signaling?
On Thu, Nov 18, 2010 at 2:08 PM, Shrini linuxbos...@gmail.com wrote:
Hi Roger,
I tried as suggested by you. No luck, still same.
Thanks
Shrini
On 11/18/2010 2:18 AM, Rogers
This may sound elementary but it has caught me before. Make sure you don't
have auto-reg-ephone enabled on telephony-service.
On Thu, Nov 18, 2010 at 3:48 PM, Shrini linuxbos...@gmail.com wrote:
Hi Dew,
1. no create profile
create profile
After you add DNs and pools run create profile
12 matches
Mail list logo
