Can anyone explain what's the different between vm pilot method(hunt pilot
-- hunt list... + direct routing rule in cuc) and cti route point method(set
the dn of route point which forward all to vm) when implementing cuc AA?
___
For more information regar
I see the requirement for preventing UC to answer calls that it originated,
but can't find much on the requirement. Is there a certain way to do this?
Is it done by default?
Adam Compton
___
For more information regarding industry leading CCIE Lab train
If i'm not wrong , it's checked by default. Unless someone unchecked it.
Call Loop Detection by Using Extension
Enable for Forwarded Message Notification Calls (by Using Extension)
On Tue, Mar 1, 2011 at 8:36 PM, adam compton wrote:
> I see the requirement for preventing UC to answer calls t
There's another option using help page.
Enable for Forwarded Message Notification Calls (by Using DTMF)
Calls that Cisco Unity Connection forwards (for example, to notify a user
that a message has been received) are sometimes forwarded back to
Connection. When call loop detection is enabled, Conn
Hello John,
It should be 13:00. 13:01 means you are ignoring entire 60 seconds that can
be used otherwise.
On Fri, Feb 25, 2011 at 4:47 AM, CCIE for Me wrote:
> Hi,
>
> If a question were asked during the lab exam that says to allow or block
> calls during a certain period of time, for example
Hi all,
for following question , i have got the answer from QoS SRND but i do not
know , how to verify it .
Please have a look and let me know if i am missing anything...
Link fragmentation and interleaving
768k between hq and site c.
configure FRF.12 at a 10 MS sampling rate
*config for FRF
Hi all ,
For following question
For IP Phones and gateways , all calls within same site
should use G711 codec. Also, all calls between the sites to remote IP phones
and
gateways should use G729 codec.
My answer would be
Hq region --à HR
Br1 region --à BR
Put the br1 gateway and
Are you using inline power switch to power the phone. If so use the
below command under the switch port
power inline delay shutdown 20 initial 300
If you are using power adapter, may be not the suitable one.
On 2/19/2011 12:25 AM, Kiyam Kadir wrote:
Dear Experts,
Has anyone seen a Cisco 7935
Hi
I have 4 x Cisco 7960 Phones, I am looking to upgrade in order to fully
comply with Cisco Voice Lab, what do you recommend in terms of Cisco IP
Phone, 7961, 7962??
___
For more information regarding industry leading CCIE Lab training, please visit
ww
Because you need to call out to pstn sometimes so it matters.
Set intraregion to g729 as well and hardcode it manually in region to g711 for
calls with the same region.
It is because there's a bug involving request to gatekeeper sending wrong
bandwidth request.
Sent from my iPhone
Pls pardon
I believe that the 7962 is the none color version of the 7965 used in the
lab.
On Tue, Mar 1, 2011 at 4:42 PM, Rafay Aslam wrote:
> Hi
>
> I have 4 x Cisco 7960 Phones, I am looking to upgrade in order to fully
> comply with Cisco Voice Lab, what do you recommend in terms of Cisco IP
> Phone, 79
Hi Shrini,
Any device which doesn't show the POST and doesn't show any err message, I
would want it to be RMAed or replaced.
Regards
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Shrini
Sent: Tuesday, March 01, 2011 5:05 PM
To: Kiyam
On Tue, Mar 1, 2011 at 8:54 PM, adam compton wrote:
> The 7961's will do and the 7962 would be the best. Honestly, I've been
> able to get by pretty with with one 7962, 3 7942s, and and 2 7960s. I'm
> lucky enough to have a bunch of phones just lying around though :). If
> you're doing the rem
Hi
One of the issue I have noticed if your switch port is configured with voice
and data vlans, change your switch port to voice only.
On Sat, Feb 19, 2011 at 3:25 AM, Kiyam Kadir wrote:
> Dear Experts,
> Has anyone seen a Cisco 7935 Conference station that gives a sound when
> power is conne
When there is a requirement for HQ Phones calls to BR1 area code numbers or
redundancy through BR1 Gateway
On 1 March 2011 22:25, Rahul Kapor wrote:
> Hi all ,
>
>
>
> For following question
>
>
>
> For IP Phones and gateways , all calls within same site
>
> should use G711 codec. Also, all cal
15 matches
Mail list logo
