*The below two lines are not needed as we are routing it out the voice vlan
and loopback interface.
**
int vlan
ip pim dense-mode
**I've just retested this now on a branch with MGCP gateway meaning no dial
peer anywhere. The rest of the configs mentioned by Shrini are good. A first
it didn't wor
hello
very important to know for qos question
auto qos voip trust fr-atm= mlp lfi
auto qos voip trust = FRF12
depending of what they gonna ask us t do
regards
Message d'origine
De: Mritunjay Kumar [mailto:mjs...@gmail.com]
Date: lun. 3/7/2011 6:58
À: voice boy
Cc: Frider
Rahul,
add "ccm-manager music-on-hold" PSTN moh will work.
Thanks
Shrini
On 3/7/2011 11:10 AM, Shrini wrote:
Rahul,
If you set voice class that means inter branch you are setting codec G711.
Simple config:
/call-manager-fallback
moh music-on-hold.au
multicast moh 239.1.1.1 port 16384 route
Rahul,
If you set voice class that means inter branch you are setting codec G711.
Simple config:
/call-manager-fallback
moh music-on-hold.au
multicast moh 239.1.1.1 port 16384 route 10.10.110.2 10.10.200.2
max ephones 2
max dns 10
ip source address 10.10.200.2
ip multicast-routing
ccm-manager
Make sure you are putting the MOH servers in a DP with G.711 region to every
other region.
On Mon, Mar 7, 2011 at 12:21 PM, Rahul Kapor wrote:
> Hi All,
>
> I have tested it in my lab .
>
> if i dont give voice class codec under dial-peer , MOH does not work for
> PSTN phone.
>
> Can you try i
Hi All,
I have tested it in my lab .
if i dont give voice class codec under dial-peer , MOH does not work for
PSTN phone.
Can you try in your lab and let me know about the result ?
thx,
Rahul
On Mon, Mar 7, 2011 at 10:46 AM, ccieid1ot wrote:
> Thanks Roger! Hopefully Rahul agrees as wel
Hi Claude ,
How auto qos voip trust fr-atm is differ from auto qos voip trust ?
Regards,
MJ
2011/3/6 voice boy
> Hi Claude,
>
> thanks a lot for your reply
> For the wan QOS,, i think in hq you have a switch wwhich will trust coming
> traffic from ip phones and servers and PCs
> So I guess w
Hi Steeve,
I agree with you. I am also confused in this type of scenario for
calling number.
When you are sending 10 digits as calling party number it will be
National number. Even if I set the number type as subscriber , on the
called side the type changes to "National" (because on PSTN rou
Hi Roger ,
thanks for reply .
i will check and let u know the result.
Thanks ,
MJ
On Sun, Mar 6, 2011 at 9:32 PM, Rogers Ochieng wrote:
> If there is no VoIP activity in the MGCP gateway, after the defined
> receive-rtcp timer, the gateway tries to disconnect the call
>
> The following command
There are less CCIE within Cisco then outside of Cisco actually.
From: adam compton
Sent: Monday, March 07, 2011 9:38 PM
To: Shrini
Cc: mailto:ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] How soon will they hit 3?
Not counting how many work for cisco. Plus, that is WORLD
Agreed with your logic, but in your first example (calling HQ phone from
BR1 Phone using local gateway), shouldn't the calling party be
Subscriber (BR1 phone calling out from BR1 GW)?
cheers, sd
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On
Hi guys,
Any vouchers for sale (only low price).
Thanks a lot
Naoufal
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Steffen Lehmann
Sent: Saturday, February 05, 2011 4:26 PM
To: ccie_voice@onlinestudylist.co
Not counting how many work for cisco. Plus, that is WORLDWIDE!! Even the
US which has the highest concentration of CCIEs has somewhere between 6000
and 7000.
On Sun, Mar 6, 2011 at 10:23 PM, Shrini wrote:
> IMO look at CCIE Voice experts count .. ~ 1500 worldwide as of today. Not
> even one CC
Thank you for your reply,Same what I am thinking about, I used the Policed-dscp map table. show mls qos map policed-dscp.From: Friderich Claude To: Friderich Claude ; Ccie Voice ; CCIE Study Sent: Mon, March 7, 2011 12:12:59 PMSubject:
RE: [OSL | CCIE_Voice] QoS Configuration Documnet - Sorry my m
Hi,
If you think about this logically, it can't be 10!!!because there can
always be more than 10 people in the queue, therefore the starting point
can't be 10.
It's like a basket, when you put the first apple the the basket, how many
apples do you have in the busket right 1! :)
And yes, c
Yes you need to run utils dbreplication stop on Pub then Sub in order other
wise is not going to work. Then go back to the Pub and utils dbreplication
reset all
On 6 March 2011 21:35, Angila Smith wrote:
> How do I know that I have database replication issue and how to fix it?
>
> Is it a bes
Hi
Correct Statement
DSCP CS4 = 16 in decimal
Dscp-cos map:
d1 : d20 1 2 3 4 5 6 78 9
---
0 : 00 00 00 00 00 00 00 00 01 01
1 : 01 01 01 01 01 01 02 02 02 02
2 : 02 0
17 matches
Mail list logo
