Also add isdn outgoing ie redirecting-number
On 4 April 2011 08:35, Hannes Dippenaar hanne...@hotmail.com wrote:
Hi,
Please see below:
interface Serial0/0/0:23
description # To Hannes HQ Router #
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn
Hi Hannes,
It doesen't. You need to have isdn outgoing ie redirecting-number.
Sincerely
Roger Källberg
CCIE #26199 (Voice)
Consultant
Cygate AB
Eric Perssons väg 21, SE-217 62 MALMÖ
Från: Hannes Dippenaar [hanne...@hotmail.com]
Skickat: den 4 april 2011 07:35
Hi Naoufal!
This is a old known bug in IOS. To fix it you need to do this,
no mgcp
no mgcp bind cont source lo0
no mgcp bind med source lo0
*Wait a few seconds just for good measures
mgcp bind cont source lo0
mgcp bind med source lo0
mgcp
Works for me every time.
Sincerely
Roger Källberg
Hi Guys,
I can see lot of guys are freshers out here!
Previously people pass the lab by making back to back attempts and when they
attempt they remember the labs and get it then they make the solutions and
attempt when there is no ipexpert,ine or 360
so lets say 3 attempts they fail
I like you Jonny :)
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jonny Mendas
Sent: Monday, April 04, 2011 11:00 AM
To: v.c...@yahoo.com; a...@ipcomconsult.com; jbr...@tsginc.biz;
ccie_voice-boun...@onlinestudylist.com;
I listened to your email using DriveCarefully and will respond as soon as I can.
Download DriveCarefully for free at www.drivecarefully.com
Sent from my BlackBerry® smartphone on 3
___
For more information regarding industry leading CCIE Lab training,
Hi all,
I need to run more than one auto attendant on the same router, depending on the
called number.
I usually do it by adjusting Tcl script, I need to know if you have better than
this solution
Regards,
___
For more information regarding
HI I was just looking over V2 L4 and have a question
In 2 .3 it says LD calls in Spain should use a TP 00.[1-9]xxx and
Intl 000.!
Is this right? I think the LD call would use an access code 0 and the
intl is 00.
Why the extra 0
Thanks,
Best Regards,
Randall Crumm
Voice and
--
An HTML attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20110404/cb56ec6b/attachment-0001.html
--
Message: 2
Date: Mon, 4 Apr 2011 08:06:13 +
From: justin...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL
. *
*
-- next part --
An HTML attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20110404/cb56ec6b/attachment-0001.html
--
Message: 2
Date: Mon, 4 Apr 2011 08:06:13 +
From: justin...@gmail.com
To: ccie_voice
attachment was scrubbed...
URL:
/archives/ccie_voice/attachments/20110404/cb56ec6b/attachment-0001.html
--
Message: 2
Date: Mon, 4 Apr 2011 08:06:13 +
From: justin...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice
/attachments/20110404/cb56ec6b/attachment-0001.html
--
Message: 2
Date: Mon, 4 Apr 2011 08:06:13 +
From: justin...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 62, Issue 19
Message-ID
Hi,
Another 0 is your outbound PSTN dialing access code.Something like ur HQ
and BR1, used 9 as a PSTN access code.
Make sense?
Thanks
Shingei
On Tue, Apr 5, 2011 at 2:12 AM, Randall Crumm randall.cr...@flextronics.com
wrote:
HI I was just looking over V2 L4 and have a question
In 2 .3
0 is the PSTN access code, and one 0 is LD code then 00 international code
So calling LD i dial 0 then my LD number starting with 0 0.0[1-9]XXX
International 0.00!
On 4 April 2011 21:12, Randall Crumm randall.cr...@flextronics.com wrote:
HI I was just looking over V2 L4 and have a
with g729 and rsvp always use 40k for the first call (worst case) + 24 each
subsequent call. You don't need to create an HQ location since it is already
in hubnone (well, you can but you are making more work for yourself). All
other devices that have those locations will need to be account
Thanks I see it now.
Thanks alot
Sent from my iPhone
On Apr 4, 2011, at 6:11 PM, ShinGei Yong shingei.y...@gmail.com wrote:
Hi,
Another 0 is your outbound PSTN dialing access code.Something like ur HQ
and BR1, used 9 as a PSTN access code.
Make sense?
Thanks
Shingei
On Tue, Apr
Which debug output will show any codec mismatch? I know that i need to check
for codec as one problem if a call between two endpoints get drop on answer.
I need an expert level debug i can send to an ITSP and tell them, here's the
mismatch.
___
For more
For RSVP always consider the worst casr scenario for the first call, meaning if
you're using g729 you have to reserve 40k for the first call and for g711
reserve 96k
Naoufal
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of CCIE for Me
You can run: debug gatekeeper call 10 or debug voice ccapi inout
NaoufaL
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Rogers Ochieng
Sent: Tuesday, April 05, 2011 6:55 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice]
Thanks u got it.
Sent from my iPhone
On Apr 4, 2011, at 6:57 PM, Rogers Ochieng rogersochi...@gmail.com wrote:
0 is the PSTN access code, and one 0 is LD code then 00 international code
So calling LD i dial 0 then my LD number starting with 0 0.0[1-9]XXX
International 0.00!
20 matches
Mail list logo