thank you guys
i really appreciate it
2011/4/23 George Goglidze
> On CUE you most probably have a mismatch in what you've bind sip control ip
> to in voice service VoIP, and on cue "sip server" by default is the default
> gateway.
>
> Sent from my iPad
>
> On 23 Apr 2011, at 04:56, Cristobal Pr
What do you mean by you call 5999 and CUCM will automatically hairpin the call
to 12345?
CUCM will not automatically know what you want to do, otherwise ccie's would
not be needed :)
You'll have to put either translation patter from 5999 to 12345, or a route
pattern of 5999.
Basically when
Hi Sam,
Can you check for me if "mls qos" is globally enabled?
You need this on a switch to do any QoS operation... Otherwise your
configuration looks fine, as long as it's applied to all corresponding
CUCM,router and phone ports.
Sent from my iPad
On 23 Apr 2011, at 16:40, Sam Park wrote:
>
i did, if i call 12345678 to vxml, it call the cisco lady. so go to h323 ok
the thing is , when i call 5999, it did do hairpin at all to h323 12345678
MVA (media grup) : 5999
MVA (serv parameter) : 1234567
I assume flow is : call from PSTN to 5999, and then it will hairpin to
H323 1234567
All;
I'm looking at the QoS section 5.2 of Lab3 from the OWLE class (for those of
you who took it and have the workbook)
And Vik if you read this, the IPExpert Solution guide you gave us does NOT
have the answer to this question.
Here is the scenario:
Ensure that all SCCP traffic passing through
hmm i will try again in today sessionm tks G
On Sat, Apr 23, 2011 at 2:51 AM, George Goglidze wrote:
> Looks like you've configured more channels than you're allowed to use.
>
> Sent from my iPad
>
> On 23 Apr 2011, at 05:30, donny f wrote:
>
> i config to mgcp and work fine. what i might
Hi Claude,
Thanks for the reply, I do have the hardware conference bridge configured on
the router, with support of
G729 codec of course. That verify by BR1 Phones can join into meet me
conference by dialing the number.
Issue come in when one of the meetme participant trying bring in another
part
Hello,
I think you are wrong for this question.
You must invoke a conference bridge on the router and thanks to the hardware
conference bridge it will support g729
Just add the codec g729r8 in the dspfarm profile conference ….
Should work.
Of course do not forget to put your conference bri
Hi All,
I'm practicing for the question 6.2 in Workbook 2, Lab 1. I manage to have
the MeetMe conference setup successfuly,
HQ Phn, BR1 & PSTN all can dial into MeetMe number too. The H/W Conference
Bridge was configured in HQ-RTR,
and I can verified it was utilized.
The problem comes in when I t
Hi,
I have CBootCamp's CCIE Voice Advance Lab workbook ver3.1-lab-1-5 and need 6-10
labs.. cisco 360 labs...
Yes, anything provided by cisco is good.
I'll share please inform me.
thanks..
From: "ccie_voice-requ...@onlinestudylist.com"
To: ccie_voice@onl
I think it should, but I'd have to test. It does have mwi sip-server
configuration under call-manager-fallback, and it then tells you it will be
automatically converted to
sip-ua
mwi-server x.x.x.x
Regards,
Sent from my iPad
On 23 Apr 2011, at 05:49, donny f wrote:
>
>
> just to clar
What troubleshooting have you done? Does the call get to h323 gateway after
coming in from MGCP? Does it match correct dial-peer? Does it invoke
application? Is application correctly defined?
Any debugs done?
Debug voice dialpeer
This is to start with... If nothing shows up it means you are no
On CUE you most probably have a mismatch in what you've bind sip control ip to
in voice service VoIP, and on cue "sip server" by default is the default
gateway.
Sent from my iPad
On 23 Apr 2011, at 04:56, Cristobal Priego wrote:
> Hello all
>
> I just finished my session and i was doing la
Looks like you've configured more channels than you're allowed to use.
Sent from my iPad
On 23 Apr 2011, at 05:30, donny f wrote:
> i config to mgcp and work fine. what i might miss here?
>
> On Fri, Apr 22, 2011 at 7:41 PM, Hough, Earl
> wrote:
> The reason for this error message is not
14 matches
Mail list logo
