hi exp,
I tried to config : MVA partial match.
- I have specify RD : 408-555-7890
- And I call from PSTN (555-7890) to extension 5002
- Service parameter Matching CallerID : PartialNumber of Digit : 7
however it still prompt me for Remote Dest Number and Pin ?
what I have missed here
what is the ANI sent from the PSTN ?
Is it the same as your RD ?
Best Regards ,
Moataz Mamdouh Tolba
CCIE # 26129 (Voice)
-Original Message-
From: donny f f.faraday...@gmail.com
Sender: ccie_voice-boun...@onlinestudylist.com
Date: Sat, 7 May 2011 23:53:47
To:
Hi,
It seems that there is a bug in some CCM versions considering partial match.
I tested 7.0.1.11000-3 and it doesn't work.
Refer to below CCM trace (CM Trace - Cisco Mobile Voice Access Service)
where partial match is enabled and number of digits was 6. Look for the
following:
*
Doies your gateway use H.323 or MGCP + H.323 hairpinning?
If the latter is the case, then you have expected behaviour. workaround is
to use translation patterns or add internal extension as remote destination.
search the list archieve for more information.
best regards
kobel;
On Sun, May 8, 2011
Hi,
ANI from a GW is the calling number observed via deb isdn q931 and in traces
provided. It was incomming call to CCM.
RDP number was +447976852817 (vol 2 LAB 7 UK mobile). I tried to compare
last 6 digits only but it failed.
It was failing no matter how many digits were set in Number of Digits
Hi,
It was H323 not MGCP + hairpinning.
Anyway thanks for interesting suggestion :)
--
Regards,
Bartosz
2011/5/8 Miron Kobelski findko...@gmail.com
Doies your gateway use H.323 or MGCP + H.323 hairpinning?
If the latter is the case, then you have expected behaviour. workaround is
to use
go back and modify partial to complete match (bug) and put your rdp number in
the q931 trace exactly the same in your RD (+447976852817)
AS you go to the RD config and manage your internal share line modify your
external phone number mask equal to +447976852817
It’s gonna work..
Of course
Hi,
I'm confused about the needed number maximum sessions for hw resources for both
the transcoder and the conference bridge
The exam will ask the needed number os sessions for each resource profile
Or I can use the maximum available
Also when using the maximum, will this affect the DSPs
Hi,
I need to ask about to use huntstop channel 1 in srst
or to use busy trigger per button 1
So that the calls will be forwarded to voicemail if ot have active call
Also do i need to use maximum calls per button 4 to be as cucm while it is in
srst ??
Thanks
hi all,
here is what I cnfig :
- have tried Full match and RDI : 555-7890 (my CLI : 555-7890 as per
dbug isdn q931) ,but still failed
Full match will ignore the Number of Digit , right ?we do not need
to put 7 or 10 here.
On Sun, May 8, 2011 at 1:25 AM, Amit Singh
Hi all,
just trying to eliminate some possibilities. Recently I have been having
issues with uccx recognizing the ready status of agents. I do this all the
time for my job and in the boot camp with no issues and am confident everything
is set up correctly. The only difference I see is that
You might need to review logs from the rmcm subsystem. I discovered a bug in
5.0 where a database change of skill wouldn't impact rmcm after a nic failure.
You could be running into the same bug. Not sure if it was docs in 7.0. A
reboot or reset of the node was required to reset the rmcm.
Hi Guru's
I'm having an old 2801 with the 128 MB memory and 64 mb flash.
I'm trying to run gatekeeper in that. can you recommend me an IOS for my
configuration. i tried it with the Cisco web but no luck :(
Kind Regards
John
Hey guys,
Just wanted to clear this up. So, If I use mls qos trust cos
on an interface, from then on all the queue map, threshold map will be based on
Cos-Dscp table? That is also the same for mls qos trust dscp dscp-cos tables
will be used to convert layer2 markings to layer3
I believe you want to run one of the versions of IOS in the
c2801-adventerprisek9_ivs-mz.124 line.
To use this, Your supposed to have 256 MB of RAM. You might be able
however to install it on less.
I am running c2801-adventerprisek9_ivs-mz.124-20.T.bin on my 2801
router with gatekeeper on it.
You are going to want more memory. Go to eBay and buy another 256 for $10.
On Sunday, May 8, 2011, John Anzar janzar1...@live.com wrote:
Hi Guru's
I'm having an old 2801 with the 128 MB memory and 64 mb flash.
I'm trying to run gatekeeper in that. can you recommend me an IOS for my
Hello all greetings.
I am hoping to get started - ina serious vein - with my lab prep for the
Voice track and would like to know if anyone wants to join as a study
partner. I am in West Covina (LA County), CA, and if you're local, maybe we
can get together and chart out a course of action.
Any
You are going to want more memory. Go to eBay and buy another 256 for $10.
On Sunday, May 8, 2011, John Anzar janzar1...@live.com wrote:
Hi Guru's
I'm having an old 2801 with the 128 MB memory and 64 mb flash.
I'm trying to run gatekeeper in that. can you recommend me an IOS for my
The MLS QOS trust commands are used to determine how an internal DSCP
value is derived which will be used in physical queue assignments. You
either 1) Trust the incomming L2 COS value with the mls qos trust cos
command which intern uses the COS-DSCP map to derive the internal DSCP
value,
19 matches
Mail list logo
