Has anyone tested a call from CME to CUCM via Gatekeeper and CUBE?
Could you please provide a working configuration sample?
I have configured the gatekeeper to send the calls from CME to CUCM via
CUBE. CME calls drop after matching an incoming voip dialpeer in the CUBE. I
can’t figure out why
Do we really need the switchport trunk encap dotq1 command?
Thanks
On 6/30/11 11:18 PM, Bill Lake whl...@gmail.com wrote:
Definitely
switchport trunk encap dotq1
switchport mode trunk
switchport trunk native vlan XX
switchport voice vlan XX
spanning-tree portfast trunk
mls qos trust cos
On
Looks like it is failing due to codec negotiation.
Media negotiation failure
Typical scenarios include:
*No codec match occurred.
*H.323 or H.245 problem leading to failure in media negotiation
65
CC_CAUSE_BEARER_CAPABILITY_
NOT_IMPLEMENTED
Indicates that the equipment sending this cause does
Switchport mode access xx
Switchport voice vlan YY
Generally this will do. Tried and tested. No pts deducted. If the exam ask for
portfast then pls insert cmd accordingly.
I really hate people giving the wrong info or make people key in unnecessary
commands for exam.
Sent from my iPhone
Pls
You are right on the access method configuration. Can you comment on the
right config for trunk method.
Thanks
On 7/1/11 9:57 AM, Ki Wi kiwi.vo...@gmail.com wrote:
Switchport mode access xx
Switchport voice vlan YY
Generally this will do. Tried and tested. No pts deducted. If the exam
ask for
That shouldn't be a problem... Device Pool has nothing to do with daisy
chain unless you're testing device mobility. In that situation it all
depends if the switchports support dot1q so that PC port and Switch port
reside on different VLANs.
On Thu, Jun 30, 2011 at 8:42 AM, Pithog Oil
are you sure that method is always reliable on ESW's?
My experiance is that it is not
Vik also has commented on this and said the same thing.
Do as you please but if it fails after you configure it, then you will
be the one with phones not registered.
On Fri, Jul 1, 2011 at 9:29 AM, Mini Me
Sorry for off-topic . I was studying CCIE voice but due to circumstances, i
can't pursue it now.I have around 20 voice rack vouchers left that i want to
sell. PM me for details. Payment via paypal.
Thanks.
___
For more information regarding industry
thanks, it was the codec I changed it and now is working.
On Fri, Jul 1, 2011 at 7:57 AM, manishankar pandey manishankar...@yahoo.com
wrote:
Yes this has to do with Codec mismatch. Or the Interpretation of Fast start
and Slow start.
Try using the below option
1) Create Voice class and
One more thing. I couldn't answer the call without call start interwork so
I added the following class to both incoming and outgoing dial-peers.
voice class h323 5
h225 timeout tcp establish 5
h225 display-ie ccm-compatible
call start interwork
Thanks,
Joe
On Fri, Jul 1, 2011 at 11:34 AM, Art
Looking for 15-20 vouchers. Please pm me if selling and the cost.
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
if you remove the call start interwork and on your ucm h225 trunk un check
wait for far end TCS set it should work as well
2011/7/1 Art Joe Babakhani Gharibian ciscoie2...@gmail.com
One more thing. I couldn't answer the call without call start interwork
so I added the following class to both
i don't think that;s configurable
2011/6/30 Pablo Meneses pmenese...@gmail.com
Hi experts,
Is there a way to display 1 call on phone when using B-ACD Drop Through?
I think that it will display 1 call on queue and that there is no way for
it to display 1 call on phone, but, I better ask.
13 matches
Mail list logo