Not correct. This include both.
If you use NBAR match protocol mgcp under your class map then you are
matching both.
You can verify this using the command sh ip nbar port-map. This will show you
both ports under mgcp protocol.
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Nov 7, 2011,
Dear All,
Seem to be having a issues with the above..
All is setup as per DSG guide... but when i make a call to the VM pilot and
enter PIN
After 30 seconds the Voice Mail ports go to unregistered and the call fails
with the message temp fail displayed on the phone
Am only running a
Just to add a little more... I have noticed that the CPU hits the roof as
well during this time..
Monitoring via RTMT
Than
Duncan
From: Duncan Hamilton-Walker [mailto:dun...@rosethorn.plus.com]
Sent: 07 November 2011 12:32
To: 'CCIE Study'
Subject: CUC and CUCM
Dear All,
This is an automated reply to your message CCIE_Voice Digest, Vol 69, Issue
28 sent to stewart.mcfarl...@provista-uk.com.
Dear ccie_voice-requ...@onlinestudylist.com
Thank you for your email.
Please note that due to unforseen circumstances I will be out of the office for
the rest of this
Duncan,
What type of server are you running your VM on? There are documented
issues, I can't remember if it is a bug, with running 7.x on a VM server
running an AMD processor. The only way I was able to get around this was to
set the subscriber mailboxes to auto-login.
HTH
Adam
On Mon, Nov 7,
Hi Adam,
My host server PC is a DELL studio XPS i5 with 14GB of ram... But i just
realised that the CUC VM is running on my laptop ... which is an AMD
processor...
Ok i will move the VM to my DELL PC and try again.. should move ok as they
were both created in VM Workstation 7
Thanks for
Hi Mohammad,
Just to clarify, I am asking about matching on 3750. Unless I am mistaken
this does not support nbar.
Do you believe that an access list should be used to match both UDP 2427 and
TCP 2428 in this case?
Thanks.
From: Mohd Baqari
Hi All,
I tend to use auto qos on my WAN routers to to use as templates for my QOS
Config. So if I am asked to to FRF.12, I assign bandwidth on the subinterface,
and then under the interface-dlci I configure auto qos voip or auto qos voip
trust. I noticed that after doing so, my frame-relay
I believe this is a question in wb1 lab 1. I don't have it in from of me. It I
believe so.
Rc
Sent from my iPhone
On Nov 7, 2011, at 10:35 AM, Cciestudyvoice Cciestudyvoice
cciestudyvo...@yahoo.com wrote:
Hi Mohammad,
Just to clarify, I am asking about matching on 3750. Unless I am
Hi experts
I am working on the topic of LAN QoS. I understand we will be given tasks to
modify the setting on the egress queues of the switches. The setting includes,
buffer sizes, shape and share setting etc.
My question is, is there a best practise on what values these figures should
Vega,
You need to follow best practices as per SRND.
Thanks
Shrini
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Vega Wong
Sent: Monday, November 07, 2011 9:39 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL |
11 matches
Mail list logo