Hi Ashraf,
thanks.
-adil
PS: if anyone tried 8.6.2 and tested Paging function then let us know.
On Mon, Dec 12, 2011 at 5:08 PM, Ashraf Ayyash ash.ayy...@gmail.com wrote:
Hello ,
i have published this Info when i was in the TAC as i got email of
features included in the 8.6 CCM ,
the
Hi,
A customer wanted paging last week, and could find no mention of it
anywhere. TAC confirmed for us that it was not a supported feature at this
time. Also gave us the explanation to contact the Account Manager for more
info, but we did not (yet) do that.
Regards,
Tom
On Mon, Dec 12, 2011 at
Adding to this. I have configured predefined ephones and dns. When fallback all
the features configured on ephone where taken.
I used cipc
Regards,
Mohammed Al Baqari
Sent from my iPhone
On Dec 12, 2011, at 1:58 AM, Mohammed Al Baqari baqari.voic...@gmail.com
wrote:
Hi Ken,
The main
During th cBarge or Barge, the conference resources are used of the
destination device, the IP Phones who is Barged (Not Barging). So you have
to look for HQ MRGL and if you want the the SNR to use the BR Conference
Resource then you have to assing that resource to HQ MRGL
On Mon, Dec 12, 2011 at
You do not have to restart the Service Module, just type the ser ser 0/0
session clear.
On Mon, Dec 12, 2011 at 10:28 AM, Rrcrumm rrcr...@yahoo.com wrote:
Thanks for the follow up. I had to do a service module restart
Randall
Sent from my iPhone
On Dec 11, 2011, at 10:09 PM, Ashraf Ayyash
I tried adding it to HQ and same issue. Also, the DSG shows that you
should add it to BR2's MRGL not HQ's.
John
From: datucha123 datucha123 [mailto:datucha...@gmail.com]
Sent: Monday, December 12, 2011 4:54 AM
To: John McGaughey (jomcgaug)
Cc: ccie_voice@onlinestudylist.com
Subject: Re:
Hi Mohd,
Did you use srst mode auto provision all or srst mode auto provision none ?
As per Cisco docs , manually configured ephones have no effect for CME in
SRST mode .
I have highlighted some parts of following cisco document.
Hello,
I have an issue with Auto Registration on CUCM servers.
So I have 1 Publisher and 1 Subscriber. Have configure the CM Group with
Subscriber first and Publisher second in the list and enabled
Auto-registration Cisco Unified Communications Manager Group for this
group.
Also enabled Auto
Hi,
This is Lab 2 in the Five-Lab Handbook.
The the task: on SC (UK site +442077964XXX, MGCP gateway) the requirement
is to plus dial from
directory without EditDial +442077966596 but the phone display must show
To +442077966596
Normally globalized dial plan will not work; if I have one \+.!
I also experienced this , but other way.
if I enable auto registration on publisher it fails , after enabling in
subscriber only phones could auto-register. ( I had auto registration
enabled CUCM group SUB-PUB)
On Mon, Dec 12, 2011 at 7:32 PM, datucha123 datucha123 datucha...@gmail.com
Did you check your database replication status? You must fist make sure of your
NTP status as well. The sub should sync with the pub
Randall
Sent from my iPhone
On Dec 12, 2011, at 6:02 AM, datucha123 datucha123 datucha...@gmail.com wrote:
Hello,
I have an issue with Auto Registration on
Thanks I will keep that In mind
Randall
Sent from my iPhone
On Dec 12, 2011, at 2:57 AM, Ashraf Ayyash ash.ayy...@gmail.com wrote:
when you have session already opened , you will get message say
connection refused by the host and so you clear the session using the
command you mentioned
Sure, the DB Replication was good, not problems there.
On Mon, Dec 12, 2011 at 8:00 PM, Rrcrumm rrcr...@yahoo.com wrote:
Did you check your database replication status? You must fist make sure of
your NTP status as well. The sub should sync with the pub
Randall
Sent from my iPhone
On Dec
Hello,
Does the Attendant Console in CUCM 7.0 supports Broadcast Algorithm?
I have configure the Attendant Console with DN memebers, and everything
works fine except that when selecting the Broadcast method, the Caller
always is played on hold, the the Memebers does not ring.
Ashraf
If u will write this in lab u will get 0 hehehehehe :)
thanks for yr suggestions but i am nt interested :)
If anyone has proper answers ping me :)
From: Ashraf Ayyash ash.ayy...@gmail.com
To: Marksnap Marky markysna...@yahoo.com
Cc: Ray
Thank you so much , as suspected , this is a fake email ID and this is
a way to sell your LAB 6 ,
in regard of my credibility , i don't need someone like you to tell if
i can get the marks or no , alot of people know me and also Cisco
itself know me ,
If anyone interested of the Trash you trying
Hi,
I am not sure whether you have fixed this or not. But in between in case you
are using fixed source feed and MMoH SRST, then the following restriction is
valid.
MOH is supplied only to PSTN and VoIP G.711 calls. Local IP phone callers
hear a repeating tone on hold for reassurance that
Greetings all - I'm researching a cluster located in Dublin and it has an MGCP
Gateway support the Paris Site. I'm reviewing the gateway under the E1 PRI and
the CSS is set to ALL. Anyone know what this means?? Does it search through
all the CSS's in the list for a match?? Never seen this
It is a CSS named all. Look at the CSS and you can see the partitions that are
reachable
Randall
Sent from my iPhone
On Dec 12, 2011, at 6:04 PM, michael.se...@compucom.com wrote:
Greetings all – I’m researching a cluster located in Dublin and it has an
MGCP Gateway support the Paris
I'm familiar with this- I don't know if it is by design like the affects of
using Called Transformations at both the Route Pattern and Route List. It's
good to know about, I think it's just a lot easier to do it without gateway
called party transformation patterns (kind of defeats the object of
20 matches
Mail list logo