hi folks,
i couldn't understand the logic behind the configuration for the vol2 lab 1
gatekeeper section invoking cube functionality. here is the call flow:
cucm (gateways) --- gatekeeper(hq lo 0)
cme (gateway) gatekeeper (hq lo 0)
CUBE (gateway) gatekeeper (hq lo 0)
when i call from
Hi all, For this question: FOr HQ mgcp gateway, genrate
an RTMT email alert to ad...@cccievoice.com when PRI is not in
'Multi_frame_establised' status. Make sure alert is 'CRITICAL' type.
Also
send the email with the message 'PRI is down'
Any one know the correct solution, as i noticed that
The h323-gateway voip bind srcaddr command defines what address the gateway
uses for RTP connections. You have 10.10.110.1 being used for Gatekeeper (RAS)
signaling, and 10.10.200.3 being used for CUBE because of the h323-gateway voip
bind srcaddr command. If you want everything to appear as
Oh and then issue gateway again.
From: Microsoft Office User daqui...@cisco.commailto:daqui...@cisco.com
Date: Friday, June 29, 2012 1:48 PM
To: Krishna vinayak_...@yahoo.commailto:vinayak_...@yahoo.com,
ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com
Hi Guys,
Today I synched my CME router with internet based NTP server. Now the CME
router shows the correct time. I also have a downstream switch which synched up
with the CME and shows the correct time as well. I have 5 IP Phones out of
which 4 are 7961 and 1 is 7960. All these IP phones are
Try to create the .cnf file once again and then reset all the phones.
Rdgs,
simah.
On Fri, Jun 29, 2012 at 2:18 PM, Ashutosh Dubey ashu_tosh_du...@yahoo.co.in
wrote:
Hi Guys,
Today I synched my CME router with internet based NTP server. Now the CME
router shows the correct time. I also
So I think there could be a couple different things to check here
1. What protocol are the 7961s running? 7960 protocol?
If you're running a mixture of SIP and SCCP on these phones you will
need to setup a NTP reference for the device pool to which the SIP phones are
part of. This
My apologies. I totally read past one key word CME sorry about that. Well
none the less , send us a running-config and myself and hopefully someone that
doesn't miss the forrest for the trees will be able to help.
Thanks,
Justin McIntyre
This email and any files transmitted with it are
Make sure you have set the type on the ephone config (type 7961) and then do a
create cnf under telephony service and restart or reset phones
DQ
d...@cisco.commailto:d...@cisco.com
On Jun 29, 2012, at 3:47 PM, Sivakumar Mahalingam
sima...@gmail.commailto:sima...@gmail.com wrote:
Try to create