Re: [OSL | CCIE_Voice] ntp master- is it necessary

ramy, i apologize for not understanding the question properly... i overlooked at your question.. krishna. From: Ramy Abdelrahim To: vinayak_...@yahoo.com; daqui...@cisco.com Cc: ccie_voice@onlinestudylist.com; michael.se...@compucom.com Sent: Monday, August

Re: [OSL | CCIE_Voice] ntp master- is it necessary

Sure. If you're talking about site b or site c, then you should have the router's clock timezone command match the timezone in the date time group for that site / device pool in UCM ( skinny phones ) or have that router be the phone ntp reference ( SIP Phones ). It also makes sense to have both

Re: [OSL | CCIE_Voice] ntp master- is it necessary

Krishna, My question was apart from yours, I was trying to sync one of the gateways (Site-B) with its internal clock just for testing to see if it'll provide the same result as when synched with external source. Dan advised that this can be done with using the ntp master command on Site-B GW, j

Re: [OSL | CCIE_Voice] ntp master- is it necessary

If the CUCM is synchronizing time with the HQ router, then the HQ router needs to either the ntp master command (with an appropriate stratum) if it is indeed the network master, or the ntp server command if the hq router is synching to another source. The ntp source command will identify what in

Re: [OSL | CCIE_Voice] ntp master- is it necessary

Yes, I know that the phones get their time from UCM when registered to UCM but I think it's logically that the equipments located at the same site to have the same clock. So that when you do sh clock on the router, you get the same time displayed on the phones at that site. Right? Regards,Ramy

Re: [OSL | CCIE_Voice] ntp master- is it necessary

dan & Ramy, the question here is hq router is the one that provides the time to ucm..and therefore without putting the command ntp source how can cucm can know it has to synchronize its clock with hq router...i m sure that when you providing time from hq router to cucm phones, then you must use

Re: [OSL | CCIE_Voice] ntp master- is it necessary

If it is UCM, then the time on the router is only relevant to the phones when in SRST. When registered to the UCM, the phones are getting their time information from the UCM, specifically the date time group configured on the device pool that contains those phones. DQ d...@cisco.com

Re: [OSL | CCIE_Voice] ntp master- is it necessary

I think in your scenario you're assuming that this is a CME site. Actually, this site is a UCM remote site not CME. So, in this case do you think the 2 clock commands are sufficient? Regards,Ramy From: daqui...@cisco.com To: ramyoth...@hotmail.com CC: michael.se...@compucom.com; ccie_voice@onli

Re: [OSL | CCIE_Voice] CUE License File

You should see this on any of the vol 2, ILT, OWLE, 5 lab handbook base configs in c:\ftp -- Vik Malhi ­ CCIE #13890 Managing Partner / Instructor - IPexpert, Inc. Mailto: vma...@ipexpert.com Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Live Assistance, Please visit: www.ipexpert.com/c

[OSL | CCIE_Voice] CUE License File

Dear All, I am working on proctors lab , How to get the CUE License file , I am unable to see the file on CCX machine, Which Lab Initial COnfiguration has to be loaded to get the FTP Server settings on CCX Machine ? Reg Nehal _

Re: [OSL | CCIE_Voice] ntp master- is it necessary

You don't need the ntp master or the ntp source commands. Just the two clock commands that you have, the time-zone command under telephony service, and make sure you set the type command under the ephone (eg type 7965). Do a create cnf under telephony service and restart or reset the ephones. D

Re: [OSL | CCIE_Voice] ntp master- is it necessary

ntp source is the one missing here ... From: Ramy Abdelrahim To: michael.se...@compucom.com; daqui...@cisco.com Cc: ccie_voice@onlinestudylist.com Sent: Monday, August 13, 2012 5:04 PM Subject: Re: [OSL | CCIE_Voice] ntp master- is it necessary Dear All,

Re: [OSL | CCIE_Voice] ntp master- is it necessary

Dear All, Regarding the same subject, I tried to sync a gateway with its internal clock using ntp master only. The clock was synched but not as what's displayed on the IP phones at that site. I realized also that the stratum was higher than 10. My configuration was as follows: clock timezone EST

Re: [OSL | CCIE_Voice] wan Qos :police or bandwidth

Bandwidth = minimum bandwidth guarantee. Police = maximum bandwidth allowed. Generally, start with bandwidth then add policing after if you need to limit the bandwidth utilisation. On 13 Aug 2012 07:49, "Krishna" wrote: > hi folks, > > when doing wan qos, i come across the situation where signal