Hi
It placed there by a mistake
Now are the correct info's
Regards
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ramcharan Arya
Sent: Τρίτη, 4 Σεπτεμβρίου 2012 9:53 μμ
To: ccie_voice@onlinestudylist.com
Hi
What is the GW type that you choose
Regards
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of otunola Akerele
Sent: Πέμπτη, 6 Σεπτεμβρίου 2012 2:03 μμ
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] issue with mgcp
hi
Hello,
I want to strip the + sign followed by a number of digits from a number
using a voice translation rule.
For example, let's say that the input number is +12025552002 and I want the
output to be 2002.
Thank you
___
For more information regarding
Hi
voice translation-rule 30
rule 1 /\+12025552002/ /2002/
LOGPRIGW#test voice translation-rule 30 +12025552002
Matched with rule 1
Original number: +12025552002 Translated number: 2002
Original number type: none Translated number type: none
Original number plan: none Translated
On Thu, Sep 6, 2012 at 3:27 PM, Chrysostomos Christofi
ch.christ...@logicom.net wrote:
Hi
** **
voice translation-rule 30
rule 1 /\+12025552002/ /2002/
** **
LOGPRIGW#test voice translation-rule 30 +12025552002
Matched with rule 1
Original number: +12025552002
You can not use Safari to do updates to CUCM, it will not work, switch to
IE or Firefox
On Thu, Sep 6, 2012 at 5:51 AM, otunola Akerele
otunola.aker...@gmail.comwrote:
hi guys,
please am trying to configure mgcp on proctorlab equipment and this
is what i get after i click on first save,
Or something more general
voice translation-rule 40
rule 1 /\+1202555/ //
LOGPRIGW#test voice translation-rule 40 +12025552002
Matched with rule 1
Original number: +12025552002 Translated number: 2002
Original number type: none Translated number type: none
Original number plan: none
Here is a translation rule that you can use to strip any number down to 4
digits.
rule 1 /^.*\($\)/ /\1/
Jason
- Original Message -
From: The Masterplan
Sent: 09/06/12 06:54 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Voice translation rule
Hello,
I
Hi
We would like to create a sip trunk with ISP but not for voice but for data
Is it any special config to pass data through the sip trunk instead of voice?
Cisco 3745 model
Regards
___
For more information regarding industry leading CCIE Lab
I don't understand your question. SIP uses a data connection, not the other way
around. If you're just looking for a data connection, SIP isn't a factor.
DQ
d...@cisco.commailto:d...@cisco.com
Sent from my iPhone
On Sep 6, 2012, at 1:36 PM, Chrysostomos Christofi
Hi Guys
Let's explain the plan
We have one central router connected with other branches through mpls network
provided by the ISP
The connection is layer 2
If the mpls is down we will redirect the traffic to other branches through sim
card(3g mobile card) which is connected to the router
And
Hey Chrys,
I am not sure if I'm understanding the requirement. But I believe you are
mixing some concepts here. SIP is not a layer 2 technology.
Since what you need is a data connection between your sites, you have to
decide between the different layer 2 technologies your ISPs are
If you're looking to transfer data over SIP session (e.g. establish
session to send data rather than voice), then it's also possible but
then again, what kind of data are you looking to transport and why do you
need to do that over SIP?
Sergey
On Thu, Sep 6, 2012 at 4:18 PM, Dan Quinlan
Chrys,
I do not know how data/SIP provider hand offs work in your local
market. In the US, very often the provider will actually provide SIP service
over a common MPLS or ISP handoff and will then allow you to option
different VLAN tags or possibly IPSec/secure tunnels to do both SIP
Just making sure I don't run into any issues/caveats. I know there is more
than one way to skin a cat. That being said. If I have a dial-peer where I
want to include the dialed digits plus prefix additional am I hurting myself or
walking into a later problem if I use forward digits all along
Practicing VoiceView. Url's are in Telephony Service however the URL's are not
being pushed to my phones (go into settings and services/auth url not on
phone). When I press services button I get No services configured. End of my
lab time so not able to fool with it long. I did reboot, reset
16 matches
Mail list logo
