I did not see the mgcp bind control and media statements.
mgcp bind control source-interface lo0 (for example using loopback0)
mgcp bind media source-interface lo0
Have a great day!
Thanks,
Randall
From: darshan
To: ccie_voice@onlinestudylist.com
Sent:
Dear Experts;
We have replaced the old 3745 Voice gateway with 3945 and this gateway is
registered in cucm 7.0 as mgcp gateway.
We replace the Box and put the new 3945 in rack and plug out the E1 and
Ethernet cable and plugin in 3945.
>From call manager side we deleted the 3745 and adde
Please unsubscribe me
On Mon, Sep 17, 2012 at 7:17 AM, Alpesh Bhakta wrote:
>
>
>
>
> We have multiple sites with their own CallManagers. I am trying to get one
> of my phones to register with another one of the CM servers. There is a WAN
> link between the sites. I added the phone to the other C
OK so is this a production or lab?
If lab what happens if you change the codec to G711 on your CUCM?
Hopefully it works but let us be sure if you do not mind
Also can you post more or all of the config? It might help us see
everything. It seems like a codec issue so why wouldn't the transcoder
It looks like you are missing the toll fraud prevention. Try the commands
below.
Voice service VoIP
Allow connections h323 to sip
Allow connections sip to h322
Allow connections sip to sip
Allow connections h323 to h323
Sent from my iPhone
On Sep 19, 2012, at 5:42 AM, Chrysostomos Christ
Hi Justin
I checked the debug but I didn’t find anything
Voice mail number :3499
dial-peer voice 4000 voip
description **incoming dial peer for voip calls**
incoming called-number .
!
dial-peer voice 999 voip
destination-pattern 34..
session protocol sipv2
session target ipv4:10.4.2.3
dtm
Hmm. Lets see. Calls from CUCM to CME phones work fine because the CME phones
support both codecs. However , CUE only supports g711ulaw. If you dont mind
i'd like to see a couple show commands. Place a call from the CUCM to CME/CUE
but run a "debug voip dialpeer det" on the CME and send us
Hi Justin
I have removed the class from the inbound dial peers and the results are the
same
The transcoding does not get involved
Any ideas?
-Original Message-
From: Justin McIntyre [mailto:justin.mcint...@blackbox.com]
Sent: Τετάρτη, 19 Σεπτεμβρίου 2012 3:25 μμ
To: Chrysostomos Chris
Try taking the Voice Class codec out of the inbound dial-peer that you have
here. You should see then then that your transcoder will start to be invoked.
I believe what is happening to you is that you are sending a request over to
use 729, and then the internal call to CUE is requesting 711u.
Hi
I have
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
!
dial-peer voice 100 voip
preference 10
destination-pattern 1...
session target ipv4:CUCM IP
incoming called-number .
voice-class codec 1
dtmf-relay h245-alphanumeric
no
Do you have a voice-class codec applied to your in bound dial-peer? This will
keep the transcoder from being invoked.
Thanks,
Justin McIntyre
On Sep 19, 2012, at 6:45 AM, "ccie_voice-requ...@onlinestudylist.com"
wrote:
> Send CCIE_Voice mailing list submissions to
>ccie_voice@onlinestu
Hi Bill
And thank you for the reply
We have a cue module into cme router(remote branch)
The local users(registered to cme) does not have any issue with voice mail or AA
Calls from cucm extensions to cme extensions using g729(through device
pool/region)
I am able to reach any extension in cme bu
Can you give us more information, you say VM does not work but does it work
for local callers? does it work for PSTN callers? Or do you not have PSTN
callers?
Can you dial the VM directly?
What are the results of show sccp conn when you do this?
We just don't have any information but a partial
Hi
Any update?
Regards
From: Chrysostomos Christofi
Sent: Τρίτη, 18 Σεπτεμβρίου 2012 1:23 μμ
To: 'ccie_voice-boun...@onlinestudylist.com'
Subject: Trancoding
Hi to all
I need your input pls for the below
I have one cluster cucm and ore remote branch
Calls to remode branch are via h2323 with
14 matches
Mail list logo
