Greetings,
I think you are doing everything right just need a few tweaks. Place a call
from the PSTN line 2 to 3033300 and do debug isdn q931 on gateway. What digits
do you see for the calling number. 7 or 10? If seeing 7 digits inbound change
your Remote Destination Number to 525, witho
> dial-peer voice 102 voip
> preference 2
> destination-pattern 3300
> session target ipv4:
> dtmf-relay h245-alphanumeric
> codec g711ulaw
> no vad
Is site to site g711? Or is your CUCM local?
> application
> service cmm http:// Pub>:8080/ccmivr/pages/IVRMainpage.vxml
Did you get success
I don't think there is a way to change this in CUCM...
...is there?
-Chase Mergenthal
--
If winners never quit and quitters never win, then who coined the phrase, "Quit
while you’re still ahead."?
Sounds like you didn't set the MVA details under Media Resources.
I usually get these symptoms if I forget to add this.
CUCM Administration/Media Resource/Mobile Voice Access - set the MVA
number and locale.
Let us know how you get on?
regards
Peter
On 3/17/2013 12:53 PM, sanity insanity w
A few points to clarify, although it seems the question has already been
answered...
Route selection uses longest match, however the "urgent priority" flag
allows you to route a call as soon as there is a match on that pattern, and
the system will not look for a longer match. (In production use s
Hello All,
I have been trying this config for MVA for close to 2 weeks now and it
does not work . Here are the details
The Issue :
==
I am trying to Intiate a Call from PSTN phone to site B gateway (H323)
3033300 it should ask for
authentication once authenticated press 1
Ok I just tested this again and there must be something wrong with your
configuration.
I set this up for my HQ phones but depending on your setup you could do it for
any phones
In cucm create a Route Pattern of 91900, and assign it to the proper partition
(maybe none or HQ)
Now assign a GW (I
