Hi Guys,
If there is a requirement using BACD that If agent did not answer the call
in 10 s , the call should be routed to next
agent. If agents are busy they should hear " All agents are currently
busy..."
The following prompts are available on the tftp serer ( ip address
X.Y.X.X) and this need
You have two config options to keep in mind:
1. MGCP PRI in CUCM. Channel selection order controlled by CCM Manager backhaul
and, therefore, configured in CUCM
2. PRI controlled by IOS (i.e. the channel isn't back hauled). The IOS config
controls channel selection.
With the CUCM back-hauled
I just did a google search for SecureCRT 3 and scrollback and got this,
can't vouch for it but basically you just log the session or increase the
buffer
The number of lines that the scrollback buffer in SecureCRT can be
increased to allow more lines to be saved.
The 'Scrollback buffer' setting is
That is a good question actually. In my home lab I was using SecureCRT 6 (which
is not the version in the real lab). In CRT 6, you can edit the session
settings by:
1. Options>Global Options
2. General...Default Session, select "Edit Default Settings"
3. Go under Terminal>Emulation and modify th
So how to increase the buffer :)
Sent from my iPhone
On May 15, 2013, at 1:47 AM, "Barrera, Hugo" wrote:
> This dang client cost me about 20 min in the Lab because I didn't know how to
> increase the buffer.
>
> Regards,
> Hugo
>
> On May 14, 2013, at 3:32 PM, "Bill" wrote:
>
>> I think
Hi
top to botton isdn channel =? 1 to 31 or 31 to 1
which one is by default.
confused
--
Regards,
Dharambir Kumar
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
How about:
sh run | s ephone-dn 1
sh run | s ephone 2
Note there are 2 spaces in between ephone-dn and 1 & 2 spaces between
ephone and 2.
On Tue, May 14, 2013 at 6:16 PM, Dharambir kumar varma <
dharambi...@gmail.com> wrote:
> Hi
>
> some time i need to see only particular ephone setting/or
I use "sh run | s ephone 1" for example. The "trick" is to have two spaces
after 'ephone'. This is because the config line literally has two spaces.
Same for ephone-dn.
On Tuesday, May 14, 2013, Dharambir kumar varma wrote:
> Hi
>
> some time i need to see only particular ephone setting/or ephon
This dang client cost me about 20 min in the Lab because I didn't know how to
increase the buffer.
Regards,
Hugo
On May 14, 2013, at 3:32 PM, "Bill" mailto:whl...@gmail.com>>
wrote:
I think it is an old version of secure CRT and not one easily found on the web.
I think something like version
I think it is an old version of secure CRT and not one easily found on the web.
I think something like version 3 or 4 but I really did not worry about that, I
use the current version and it works similar but don't expect much more that
very basic interface
Sent from my iPad
On May 14, 2013, a
Attention To:- Administrator of CCIE Voice Study Group.
Kindly , Please remove this e-mail from your e-mail distribution group
kar...@naver.com.
Whenever we reply to the Study Group we always get a message from this
email that his e-mail is full or invalid.
Your Prompt action would be highly app
I think it should be v2 however I am not quite sure
On 14 May 2013 15:07, Barrera, Hugo wrote:
> Anybody know what version of ssh client that is in the real lab on the
> CUPC Test PC?
>
> ** **
>
> - Hugo
>
> ** **
>
> ___
> For more informat
Hi
some time i need to see only particular ephone setting/or ephone-dn
setting on CME.is there any shortcut command like show ephone | like
that ...on CME
please share..
--
Regards,
Dharambir Kumar
___
For more information regarding industry leading
Anybody know what version of ssh client that is in the real lab on the CUPC
Test PC?
- Hugo
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Guys,
Thanks a lot for the replies. It looks to me it was down some hours and now
it is back. Will check with their support team
Thanks again!
On Tue, May 14, 2013 at 4:09 AM, CCIEing wrote:
> It is working just now
>
> Sent from my iPhone
>
> On May 14, 2013, at 12:50 PM, Josh Petro wrote:
Yes when you create your remote destination profile and associate it with the
phone at the end of the page you will find a purple section that has alerting
name ascii and external number mask u have to rewrite that again and its not
configured by default from associating the same line with the p
Hi all,
I had the following problem , when I make a call from remote Destination to
the MVA IVR number, then to internal extension, the calling name for the
configured in the line for the remote destination profile does not appear
on the internal phone when it answered the call, this happen only w
For early media, Mtp codec depends on your requirement. If your inter region
codec requirement is g729 then define that in the mtp codec configuration and
you don't need to use pass through..
I have tested this in my lab..
Thanks and regards,
Piyush Jain
Sent from my android device.
-O
Traces are always time consuming :)
On Mon, May 13, 2013 at 9:44 AM, Kirill Groshev wrote:
> Hi gentlemen,
> I was getting the CallManager service traces and looking for incoming
> andh225 setup messages with h245 elements. You will see the keyword
> "faststart" in the trace as well as offered
It is working just now
Sent from my iPhone
On May 14, 2013, at 12:50 PM, Josh Petro wrote:
> Hi Randall,
> I also can get to their site and I'm able to login. I don't have any rack
> time now, so I obviously cannot check that far, but I was able to get to
> their site. The site came up very s
Hi Randall,
I also can get to their site and I'm able to login. I don't have any rack
time now, so I obviously cannot check that far, but I was able to get to
their site. The site came up very slowly, just FYI.
Josh
On Mon, May 13, 2013 at 10:36 PM, Randall Saborio wrote:
> Hi,
>
> Anyone can j
Hi,
Anyone can just give it a quick check and let me know?
On Mon, May 13, 2013 at 7:15 PM, Randall Saborio wrote:
> Hi guys,
>
> Just checking if is it my provider or proctorlabs problem.
>
> Can't open up proctorlabs.com and I am missing my session already :(
>
> --
> Randall "da ill" Sabor
Hi Randall,
The same happened to me yesterday and I sent email to sales and support of
proctorlabs and they responded saying the system is down and didn't know when
it will be up.
Regards.
Khaled Al-Saholy
Date: Mon, 13 May 2013 19:15:32 -0600
From: ill2...@gmail.com
To: ccie_voice@onlinestud
Hi guys,
Just checking if is it my provider or proctorlabs problem.
Can't open up proctorlabs.com and I am missing my session already :(
--
Randall "da ill" Saborio
CCIE Voice Wannabe #10054675811
___
For more information regarding industry leading C
24 matches
Mail list logo
