Hi Ramcharan,
If this pattern is blocked in Unity, then you have to unblock it (from the
restriction table). Usually what I do is i always put 9 before the Pstn number
and it becomes like this 93942123. This pattern usually is not blocked in unity
and by putting 9, it will hit the already
hi Guys,
I need to set the following at phone level ...
i)Chirp 1
ii) Chirp 2
iii) Cisco Techno
iv) Classic Ring 1
Line level (2001)...
i)Cisco Techno
ii)Classic Ring 1
Now when I make the Ringlist.xml file with
- # CiscoIPPhoneRingList
- # Ring
DisplayNameCisco Techno/DisplayName
hi Guys,
How do we set the following ringlist at phone level and line level
Phone level:
1) Chirp 1
2) Chirp 2
3) Cisco Techno
4) Classic Ring 1
Line level(2001):
==
1) Cisco Techno
2) Classic Ring 1
Here is the Ringlist.xml I have created...
- #
Hi Drake,
I believe you also need to edit and upload DistinctiveRing.xml for the
line level rings.
Joel P
Always stand on principle, even if you stand alone
Adversity introduces us to ourselves
There are two kinds of men who walk the earth... Men of Action, and then
all the others
hi All,
I have the following config
ephone-dn 3
number 4001
label 4001
description +85224044001
name +85224044001
call-forward busy 4220
call-forward noan 4220 timeout 20
!
ephone-dn 5
number *4001
call-forward all 4220
!
ephone 2
mac-address 1089.CF01.7C99
ephone-template 1
I think you might need to strip the * off as you send it to CUE do it on
the CUE dial sip dial peer with a voice translation
On Wed, May 22, 2013 at 8:45 AM, sanity insanity
networksanitytoinsan...@gmail.com wrote:
hi All,
I have the following config
ephone-dn 3
number 4001
Hi,
ephone-dn 5
number *4001
call-forward all 4001
Since the busy trigger the line is 1, the call will be forwarded to VM of
4001, otherwise it's forwarded to VM of extension *4001, which is not
configured.
Hope that helps.
K.
On Wednesday, May 22, 2013, sanity insanity wrote:
hi All,
I
You will want to change the DistinctiveRingList.xml for the Line Level.
Regard,
Jason Nielsen
On Wed, May 22, 2013 at 3:14 AM, Drake J jdrake...@gmail.com wrote:
hi Guys,
I need to set the following at phone level ...
i)Chirp 1
ii) Chirp 2
iii) Cisco Techno
iv) Classic Ring 1
Line
MJ,
Your configuration looks ok but I think you might be forwarding the * to VM. I
would recommend the following:
voice translation-rule 10
rule 1 /.*\(4...\)$/ /\1/
voice translation-profile vm-redirect
translate redirect-called 10
!
dial-peer voice 4220 voip
translation-profile outgoing
HI All,
I am really struggling with QOS
I can understand what this command means :
mls qos srr-queue output cos-map queue 1 threshold 3 5
How to use it ???
___
For more information regarding industry leading CCIE Lab training, please visit
Dear Experts,
I'd like to know how to configure LAN QOS for CUE Traffic?
As far as i know it's the following
Under all Phone Ports apply qos
Int range fas1/0/14-16
auto qos voip cisco-phone
no mls qos map policed-dscp 24 26 46 to 0
mls qos
mls qos map policed-dscp 24 to 8
mls qos map cos-dscp
I haven't tried Kirill's method. My method is similar to Bill's approach.
Sample:
ephone-dn 5
number *4...$
call-forward all 4600
!
voice translation-rule 1
r 1 /.+\(\)$/ /\1/
voice translation-profile strip-rdnis
tr redirect-called 1
!
dial-p v 81010 voip
destination-p 4600
session
hi all,
what is the possible cause , when I do Server Health in CUPC client.
Presence service showing Red Pending Retry.
tks___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE
Hey,
That command is assigning COS value 5 to Queue 1 Threshold 3.
Depending on what DSCP value is mapped to COS 5 in the mld qos map
cos-dscp mapping will determine what traffic is placed in that queue
and threshold. I have seen COS 5 mapped to DSCP 40 by default using
Auto QOS, which
hi experts,
can anyone share how to config desk mode and soft mode best practice for CUPS
in exam? I can't figure out why did not got point for cups even it is working
fine.
tks___
For more information regarding industry leading CCIE Lab training,
hi ,
i am integrating CUE ports to UCM. CTI port and Route point looks good and
registered in callmanager.
Also sh ccn status ccm-manager is good.
But when i try to call 4220 and 4221 from Local Phones without going to
intersite, I got busy tones. Any advice?
There is always more than one way to complete this type of task but for me
the use of voice translations was the most flexible and effective. That
said, having more tools in mental tool box never hurts.
Bill
On Wed, May 22, 2013 at 1:16 PM, William Bell b...@ucguerrilla.com wrote:
I
CCIEing,
See page 111 of SRND
CAT2970(config)#mls qos srr-queue output cos-map queue 1 threshold 3 5
! Maps CoS 5 to Queue 1 Threshold 3 (Voice gets all of Queue 1)
Remember Queue 1 is the priority Queue by default.
You should download the SRND and use it when configuring LAN QoS. It makes it
a
Dear Experts,
I have solved the LLQ LFI for Router QOS with exactly the following
solution and I have never scored any points in the section.
Kindy , Please could you tell me what I am missing ?
ON HQ SB Routers
Set the Bandwidth to 384 for LFI
under the frame relay dlci enable the autoqos
19 matches
Mail list logo