[OSL | CCIE_Voice] TCL applied but when calling 4000 call disconnected...

guys see my applied config... when call 4000 is goes disconnected... what is issue? SiteC-RTR#sh run Building configuration... Current configuration : 10065 bytes ! ! Last configuration change at 11:17:36 HK Sun Jun 30 2013 ! NVRAM config last updated at 10:55:49 HK Sun Jun 30 2013 ! version

Re: [OSL | CCIE_Voice] TCL applied but when calling 4000 call disconnected...

Amit, I would recommend that you verify your script. You can do so by going to the following link: ! http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html ! Cisco Unified CME Basic Automatic Call Distribution and Auto-Attendant Service (B-ACD) ! ! Your script

[OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?

Hi All, I don't know what to say or whom to complain to? This's the second day I'm having difficulty in working in my online sessions with Proctorlabs vracks. I contacted supp...@ipexpert.com and supp...@proctorlabs.com and afterhours support but no one answering Yesterday I asked the

Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?

All, I had a very frustrating session this morning. I could not login to the Publisher, even though I could connect with the browser. Didn't work in IE or Firefox. I could log into the subscriber but saw that there was a configuration already loaded. When I tried to save any changes, just got

Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?

hi khaled, you are not alone, i have 3 session with them this week, all of them issue and i can  not open the ticket , looks like they disable it so frustrate K From: khaled Saholy khaled_sah...@hotmail.com To: ccie_voice@onlinestudylist.com

[OSL | CCIE_Voice] OWLE load from proctorlab

hi all, i load OWLE Wb 1 from proctorlab in my session. Here is config they load,  but my CUE is not reachable from HQ and other site. (however is reachble to SC only) .   is there tshoot they inject or what i miss here?

Re: [OSL | CCIE_Voice] Is there anyone working in Proctorlabs in weekends?

i can not power up most server and sometimes vpn also failed to work. but when u open ticket , suppprt usually our end is good , please check your side. From: Dane Warner dwar...@epochuniversal.com To: khaled Saholy khaled_sah...@hotmail.com;

Re: [OSL | CCIE_Voice] OWLE load from proctorlab

Hi Karen, You can use the other loopback 1 address (10.10.115.0/24) . The problem is related to the mask. int lo 1 ip add 10.10.115.1 255.255.255.0 ip ospf net point-to-po int ser 0/0 ip unnum lo 1 service-modul ip add 10.10.115.2 255.255.255.0 service-module ip default-gateway 10.10.115.1 no

Re: [OSL | CCIE_Voice] OWLE load from proctorlab

hi khalid,   do u mean when i change mask of loopback 0 , it will fix the issue too ? - what is the right procedure to do  after change the ip address os service-engine 0/0   do i need to do ser ser 0/0 reload  or ser ser 0/0 reset so that CUE can pick up the new ip address ? i heard we need to

[OSL | CCIE_Voice] Clocking for GW

hi folks,   when we were asked to do below :  what is the right command and verification?   Take clocking for Layer 1 from Network side. Your PRI clocking of layer 2 should be user side. Ktks___ For more information regarding industry leading CCIE Lab

[OSL | CCIE_Voice] All Labs Table and Proctor Labs Vlahs

In setting up my sessions I've noticed the it doesn't appear that when you pre-load the configuration the proctor labs vlans match up with the vlan naming convention as to what's in the all labs table on the ipexpert site. Such as in all labs table hq server vlan is 30, but on preloaded config

Re: [OSL | CCIE_Voice] L2 overhead for QoS

Thanks, there is note from Mark Snow in one of these links that clears it up. Moreover, Cisco360 labs are using 10 bytes for frf.12 (including crc). Aman Kapuria From: Somphol Boonjing [mailto:somp...@gmail.com] Sent: Friday, 28 June 2013 3:57 PM To: Kapuria, Aman Cc:

Re: [OSL | CCIE_Voice] All Labs Table and Proctor Labs Vlahs

i think they try to mimic exam vlan From: Alex Pishko alexpis...@yahoo.com To: CCIE Lab Study List ccie_voice@onlinestudylist.com Sent: Sunday, June 30, 2013 6:38:23 PM Subject: [OSL | CCIE_Voice] All Labs Table and Proctor Labs Vlahs In setting up my

[OSL | CCIE_Voice] max session conference and xcode

hi folks,   when we configure  conference and transcode.   - what is the max session count based on ?     I assume for transcode is the cti port for UCCX and CUE, any other consideration? - how about for the conference session ?   tks K___ For more

Re: [OSL | CCIE_Voice] OWLE load from proctorlab

Hi Karen, Loopback 0 subnet mask is /32 so it's only one host. If you want to test this idea, try using another interface like voice vlan interface or a new loopback interface with /24 mask. For changing the ip address of the cue after it's been up, I think you need to reload the cue. I

[OSL | CCIE_Voice] Single Alert in RTMT for MGCP when PRI Channel is Down

Dear Experts, I would like to configure a single alert when MGCP PRI Channel is down to be sent to a specific email. I know how to configure it by going to RTMT --- Alert Central -- MGCPDCHANNEL is down --- Set Alert/Propertis but I don't know how to make a single alert to avoid excessive

[OSL | CCIE_Voice] IPCC extension not showing in CUCM a nd also not showing rmcm user

guys, anyone using proctor lab and use this issue? iPCC extension not showing... rmcm not showing under cucm? how can fix it? -- Thanks Regard's Amit Sharma ___ For more information regarding industry leading CCIE Lab training, please visit