Hi,
add user and password at the end of command.
Regards,
Allan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Hi,
Im trying to build up my home lab using a 2621XM router as PSTN simulator.
An AIM-VOICE-30 was supposed to provide DSPs to vwic-2mft-e1 and
vwic-2mft-t1. The problem is I cant create the second pri-group. The first
pri-group was created successfully. When I create the second pri-group, it
fail
bandwidth". Probably I
need to redesign the location to meet the question requirement.
Thanks again,
Allan
From: Cliff McGlamry [mailto:cl...@mcglamry.net]
Sent: Sunday, 22 March 2009 10:48 AM
To: Allan Ren; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Location i
Dear all,
I'd like to put restriction between HQ and BR1 that just allow 1 g729 call
over WAN. So I create a location named HQ and put all HQ phones under this
location. Then I put 24k on audio bandwidth. It works on HQ-BR1 connection.
But it impacts BR2-HQ connection as well. Just 1 call can
Hi,
Did you add call-forward pattern .T under telephone service?
Cheers,
Allan
Thanks, I will try it in next lab time
From: vineet sanghi [mailto:vineet_san...@yahoo.com]
Sent: Thursday, 19 March 2009 3:54 PM
To: Allan Ren
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] same route pattern in different partition
problem
just change the order of
y, 19 March 2009 1:52 PM
To: Allan Ren; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] same route pattern in different partition
problem
Translation patterns are essentially route patterns with urgent priority
engaged. They will not "roll" if the destination is unava
Hi,
I create 2 route pattern on CCM to route internal calls from HQ to BR2 as
follows:
4XXX -Partition: internal- route list: gatekeeper
only
4XXX- Partition: international route list: first to
gatekeeper then PSTN
And I have 3 phones in HQ. The
