...@onlinestudylist.com] Namens Brett Hillman
Verzonden: zaterdag 26 september 2009 20:54
Aan: ccie_voice@onlinestudylist.com
Onderwerp: [OSL | CCIE_Voice] BR2 SIP PHONE
Check the MAC address closely. This is the single biggest mistake.
-Original Message-
From: ccie_voice-boun
You get 7 7965 phones in the lab.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Friday, October 09, 2009 11:00 AM
To: ccie_voice@onlinestudylist.com
Subject:
Did you initiate the conf?
1)Choose line (go off hook)
2) Choose meetme softkey
3) Dial meetme number
Then other phone just dial meetme number
- Original Message -
From: ccie_voice-boun...@onlinestudylist.com
ccie_voice-boun...@onlinestudylist.com
To: ccie_voice@onlinestudylist.com
I think you can drill down to this thru the portal:
IT is pretty good.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/g
uide/40bacd.html
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
The issue is that auto qos applies the shaping onto the physical and you
need to remove it from the physical or configure it on the second pvc
manually using the correct bandwidth parameters.
If you configure your QOS manually on the BR1 pvc this should not be an
issue
It's almost easier than
I have a Adtran 830 and use that along with a 2811 and a pri and 4 fxs
ports to simulate the PSTN. I have 5 T1's in the adtran so it does all
of my PSTN nicely. Got it off EBAY pretty reasonable.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
I would not spend any time on this. The voice mail I saw was very basic. I
would work hard on plus dialing and qos and srst. Would know mobility and snr
basics.
- Original Message -
From: ccie_voice-boun...@onlinestudylist.com
ccie_voice-boun...@onlinestudylist.com
To:
Check the MAC address closely. This is the single biggest mistake.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Saturday, September 26, 2009 11:00 AM
To:
Can anyone give me some troubleshooting tips on why my phone can't
receive MWI notifications from the CUE while in SRST mode.
I have the CUE working in normal mode. I can hit the messages button and
get right into VM while in SRST. I can dial the extension from one of
the other branches and