Does anyone know of good information that details how the calling and called
number type should be set?
For called party I would expect it to be very straight forward:
US
7 or 10 digit dialing subscriber
11 digit national
011 International
Non-US (may vary)
8 digits - National
00
] On Behalf Of Cisco Dave
[ciscod...@live.com]
Sent: Monday, October 26, 2009 11:02 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Calling Party Number Type
Does anyone know of good information that details how the calling and called
number type should be set?
For called
Thanks Mark, that makes it easy.
From: ms...@ipexpert.com
To: adefilabi...@gmail.com
Date: Tue, 6 Oct 2009 20:41:42 -0400
CC: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Globalization and localization
7970 does not support Globalization. If the phone model ends with a
] On Behalf Of Cisco Dave
[ciscod...@live.com]
Sent: Saturday, October 03, 2009 9:49 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Calling Party Manipulation on globalized Outbound
via MGCP Gateway
I have a few questions about manipulating CLID and number type.
1) What
I have a few questions about manipulating CLID and number type.
1) What is the best method for setting called party local calls to
subscriber? Transformation Pattern, Called number Transformation Pattern (DP or
GW), or Route Pattern?
2) With the calling party ID set to 10 digits (ex.
; ccie_voice@onlinestudylist.com
It seems to happen when you have QOS setup on one of the PVC’s. remove all the
QOS config and try again
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cisco Dave
Sent: Thursday, 24 September 2009 6:13 PM
...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cisco Dave
Sent: Thursday, 24 September 2009 6:13 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] CUE Setup - Bandwidth Hog?
When setting up CUE and integrating it with CallManager my remote site
bandwidth
I took mine Wednesday and got the results the next day at about 3:00PM.
Can someone confirm where the 4 open ended questions are scored?
Thanks,
cd
Date: Fri, 25 Sep 2009 11:30:32 +0200
From: pgciscov...@gmx.net
To: kevin.dami...@vitalsite.com
CC: ccie_voice@onlinestudylist.com
Here is one off the blog by Vik
http://ipexpert.ccieblog.com/2009/09/10/what-every-ccie-voice-candidate-should-know-about-dialing/
Here is the SRND Reference - The dial Plan section covers it.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html
I would be interested
When setting up CUE and integrating it with CallManager my remote site
bandwidth is choked. Dial tone on my phones if very slow. The integration
itself seems to timeout. It takes me several attempts and it is very slooow,
pings timeout or are 2 to 3 seconds.
Anyone having the same issue
In lab 3 the L2 overhead is stated to be 11 bytes. From what guide or document
is this derived? As it goes on to state in lab 3 the SRND specifies 13 bytes
for MLP and this is what I would be expecting. Am I missing something in
regards to how this overhead was calculated?
Thanks,
cd
I am a bit confused on how the ip rsvp bandwidth command relates to the
configuration for the number of calls needed for the priority queue.
In lab 3 the ip rsvp bandwidth 112 is stated as fulfling the requirement for
RSVP, but in the QoS section 58kbps fulfills the requirement for the
I second that. Anyone have experience with this?
cd
From: kevin.dami...@vitalsite.com
To: ccie_voice@onlinestudylist.com
Date: Wed, 16 Sep 2009 19:44:18 -0500
Subject: [OSL | CCIE_Voice] ccmadmin timeout
Anyone know how to set the ccmadmin pages to not time out? I know it was a
All,
I have been working on lab three, but after implementing (successfully) the
Globalizing and Localizing station to station and PSTN inbound calls, I am
unable to make a call outbound (except to 911 9.911). It errors out on the
4th digit. Calls process outbound from the directory
14 matches
Mail list logo