How did you configure the block pattern?
If you defined it with option "7-24" (after-hours block pattern pattern-tag
pattern [7-24]) that pattern will not be overrided by code.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylis
Hi Mick,
Under your Virtual template you will have the following commands:
- "ppp multilink" - enables MLP;
- "ppp multilink interleave" - enables real-time packet interleaving;
- "ppp multilink fragment-delay 10 " - configures a maximum fragment delay of
10 ms;
In this manner Auto QoS conf
You may verify "Run Flag" under Service parameters. It should be True by
default but you can give it a try. If this will not work try restarting all
server. There can be strange things under Vmware.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice
Did you put Gatekeeper trunk in a G729-only region?
You only configured CAC mechanism until now.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Scott ODonnell
Sent: Wednesday, July 08, 2009 11:04 PM
To: O
Only document I found on this is here:
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K20653428
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Michael Ciarfello
Sent: Friday, July 10, 200
Exaclty. Thanks Jose.
Sorry it's my way of naming. I am doing IPMA manually and PT-IPMA is
manager's line partition.
From: Jose Gregorio Linero (jlinero) [mailto:jlin...@cisco.com]
Sent: Tuesday, June 30, 2009 5:27 PM
To: Cristi Radescu; OSL Gro
Hi Scott,
- IPMA RP will need CSS-IPMA. CSS-IPMA will contain partitions PT-IPMA
and PT-Internal if you use an internal partition.
- There are 3 places where you need CSS-IPMA: CTI RP, Proxy Line and
MWI Ports;
- Your IPMA must work after restarting only Tomcat Servic
I'll have mine same building same hour as Michael:
LAB LOCATION and START TIME:
Cisco Systems
150 West Tasman Drive
Bldg C, 1st floor
San Jose, CA USA 95134
Hours: 8:15am to 5:10pm
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlin
telephony-service
service phone webAccess 1
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ahmed Elnagar
Sent: Wednesday, June 24, 2009 10:38 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Vo
Hi all,
Last night I had for the first time this strange message from CUE and Unity:
"Wait while I transfer your call".
This message came after I was listening messages from mailbox.
The call flow is:
- I call CUE/Unity pilot --> I am listening all the messages --> I
delete all messages
"moh Virgin-on-hold.wav"
You should have "virgin-on-hold.au".
File format is not correct.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Azeem ahamed
Sent: Thursday, June 18, 2009 2:24 PM
To: Michael Ciarfell
On Cisco IOS gateways, the variant to use (G.729 or G.729A) is related to the
codec complexity configuration on the voice card. It does not show up
explicitly in the Cisco IOS command line interface (CLI) codec choice. For
example, the CLI does not show g729ar8 ("a" code) as a codec option. Howe
".
Cristi
From: Cristobal Priego [mailto:cristobalpri...@gmail.com]
Sent: Tuesday, June 16, 2009 11:13 PM
To: Cristi Radescu
Cc: Michael Ciarfello; Azeem ahamed; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Integrating Cisco CallManager and Cisco SRST to
Use
anscoding sessions to G729a or 3/4
transcoding sessions to G729b. The results will confirm formula.
Hth,
Cristi
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Tuesday, June 16, 2009 5:10 PM
To: Cristi Radescu; Art Sandborgh; ccie list
Subject: RE:
Hi Michael,
Very nice doc. Thanks for that. I'll do some corrections on it from my point of
view.
Please see below with blue.
Hope this helps,
Cristi
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Micha
Hi Michael,
You're welcome.
You will need this command:
multicast moh 239.1.1.x port 16384 route VOICE_VLAN_IP LOOPBACK_IP
Basically, when you configure this, the router will start to transmit music to
multicast ip address 239.1.1.x port 16384 on interfaces VOICE_VLAN and
LOOPBACK. Loopback is
Hi Cristobal,
Just a starting point in your debug:
- enable multicasting only on a server not both; if you will have both
you must configure different starting IP addresses on each server and this will
not work in Moh from flash scenario;
- 239.1.1.1 is for audio source 1, code
10, 2009 9:57 AM
To: ccie_voice@onlinestudylist.com; Cristi Radescu
Subject: RE: [OSL | CCIE_Voice] GDM configuration with notification on 2phones
Guys,
How about this...
Phone 1
Line1 : 3001
Line2 : 3101
Phone 2
Line1 : 3002
Line2 : 3102
If GDM extn is 3005, then
ephone-dn 3
number 3005 seconda
AM
To: Michael Ciarfello; Cliff McGlamry; ccie_voice@onlinestudylist.com; Cristi
Radescu
Subject: Re: [OSL | CCIE_Voice] GDM configuration with notification on 2phones
Guys,
How about monitor? For example
Phone 1
Line1 : 3001
Line2 : 3101
Phone 2
Line1 : 3002
Line2 : 3102
If GDM extn is 3005,
he look of the phone(second line will show this
extension).
From: Michael Ciarfello [mailto:mciarfe...@iplogic.com]
Sent: Wednesday, June 10, 2009 5:45 AM
To: Cliff McGlamry; Cristi Radescu; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] GDM configurati
ator and
check for pending messages (I think that is the
menu selection. You should find it there if you are experiencing what I did.
Good Luck!
Art
Message: 5
Date: Mon, 8 Jun 2009 14:57:27 +0300
From: Cristi Radescu
Subject: [OSL | CCIE_Voice] VPIM Broadcast CUE-->
Hi all,
Today I had a strange problem on a ProctorLabs rack.
I couldn't nail VPIM Broadcast from CUE to Unity. I did this many times before
but today it didn't work.
Normal VPIM message is working perfect. Please see below related config on CUE:
network location id "104"
email domain voip.lab
4:55 PM
To: cyrus@gmail.com
Cc: Cristi Radescu; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] GDM configuration with notification on 2 phones
Yeah! Its really depend on the requirements.
In this case for e.g. the System Message will be override by "2:Forward to VM"
Hi,
It's a normal behavior. It's default value for check frequency.
Pleasee see below. You can change this in "Advanced Settings".
Conversation - System Broadcast Message Check Frequency
Specify how often Cisco Unity checks for new broadcast messages. By default,
Cisco Unity checks for new broa
I think this is not possible. With "secondary number" or "overlay" it will not
work.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of David Corbeil
Sent: 27 May, 2009 8:42 PM
To: 'ccie_voice@onlinestudylis
Restriction table in Unity?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Josmar Ramirez
Sent: 26 May, 2009 8:43 PM
To: john D; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Unity Call Tr
You can put offnet on gateway.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of jeremy co
Sent: 25 May, 2009 3:41 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] call classification, how to
;t know what do you want to achieve exactly.
Hth,
Cristian
From: zamuel del Toro [mailto:sdelto...@hotmail.com]
Sent: 23 May, 2009 7:18 PM
To: Cristi Radescu; wantedtobec...@yahoo.in; ccie foro ipexpert
Subject: RE: [OSL | CCIE_Voice] caller id block code on ccme
2009 8:16 PM
To: Cristi Radescu
Cc: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] V2- CME on hook tranfer
Cristian,
It sounds good. Which version do you have at CME and IP Phone?
Thank you, Sergio.
From: cristian.rade...@crescendo.ro
Hi Sergio,
I just tested it and it works as you said. When I put Phone B On Hook, phone A
is connected with C.
I have CME configured with full-consult.
If you will configure as "full-blind" when you press transfer on phone B it
will connect phones A and C directly.
But, even in this case you mus
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cristi Radescu
Sent: 22 May, 2009 12:14 PM
To: ccie foro ipexpert
Subject: [OSL | CCIE_Voice] Voice problems on ProctorLabs Rack
Hi all,
Does anybody have problems with voice stream from rack?
I am on a remote rack, everything is configured ok
Hi all,
Does anybody have problems with voice stream from rack?
I am on a remote rack, everything is configured ok, my calls hit the CUE and
Unity pilot numbers, the call is connected but I can't hear anything.
I can't hear prompts from Unity or CUE.
Any thought will be highly appreciated,
Cris
telephony-service
caller-id block code *11
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of zamuel del Toro
Sent: 16 May, 2009 5:51 PM
To: wantedtobec...@yahoo.in; ccie foro ipexpert
Subject: Re: [OSL |
Hi List,
I have the following scenario:
- we have GK in a G729only region;
- we have MOH Server or SIP Trunk in G711only region;
How do you configure these Regions? What Region has priority?
If "G711only" region has priority and we configure G711 between "REG-G729only"
and "REG-G711only", when
You can try Vmware ESXi. It's free and you will have more free resources for
Virtual Machines.
http://www.vmware.com/products/vi/esx/
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Fawad asad
Sent: 14 Ma
As a result could we say, as a best practice, to uncheck "MTP Required" and
"Wait for Far End H.245 Terminal Capability Set" on Gatekeeper Trunk?
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Michael Ciarfel
Sorry for that typo.
You can configure preference in the following way:
Call-manager-fallback
max-dn 4 dual-line preference 2
I tested it and it worked for me.
-Original Message-
From: ccieid1ot [mailto:ccieid...@gmail.com]
Sent: 14 May, 2009 7:42 PM
To: Cristi Radescu
Cc: Kumar
What preference do you have on ephone-dns?
Try to configure "ephone-dn 4 dual-line preference 2" and let alias command as
is.
Hth,
Cristian
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Kumar, Narinder
Sent:
Hi Jeremy,
In fact pressing DND on that phone logout the phone from hunt.
So, when you are calling hunt number that phone is logged out and it will not
ring. It seems like DND is active but is not. Actuallly the phone is logout
from hunt.
You can see this with "sh ephone-hunt".
You can not chang
Hi,
I have a lab date on July 2nd in San Jose and I wanna change it with one in
Brussels, same period, before change to V3.
I'm not interested in selling date.
If someone is interested please answer me asap.
Many thanks in advance,
Cristian
40 matches
Mail list logo
