Hi,
Looking for a study partner... am working towards taking my first attempt of
the Lab.
Am in the Geneva/French alps area
Thanks
D
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are yo
Dear all,
Was just wondering if anyone else is on the 10 day bootcamp starting next
week
In san jose ??
Cheers
D
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and
Dear All,
Can someone please help me out...
Under RmCm Configuration, Resources..
I can't see the two users i have created in CM But i feel that its
linked to the fact i can't add IPCC extension to the end user page...
Because its not there as an option... I have associated the D
the light bulb moment
Rgs
Duncan
From: Adam Thompson [mailto:arthomp...@gmail.com]
Sent: 07 November 2011 14:44
To: CCIE Study
Cc: Duncan Hamilton-Walker
Subject: Re: [OSL | CCIE_Voice] CUC and CUCM
Duncan,
What type of server are you running your VM on? There are documented issues
Just to add a little more... I have noticed that the CPU hits the roof as
well during this time..
Monitoring via RTMT
Than
Duncan
From: Duncan Hamilton-Walker [mailto:dun...@rosethorn.plus.com]
Sent: 07 November 2011 12:32
To: 'CCIE Study'
Subject: CUC and CUCM
Dear All,
Seem to be having a issues with the above..
All is setup as per DSG guide... but when i make a call to the VM pilot and
enter PIN
After 30 seconds the Voice Mail ports go to unregistered and the call fails
with the message "temp fail" displayed on the phone
Am only running
Hi Gents,
I have made the change that Bill suggested and its sync'd .. many thanks for
your help..
D
From: Shrini [mailto:linuxbos...@gmail.com]
Sent: 06 November 2011 08:54
To: bkvalent...@gmail.com
Cc: Duncan Hamilton-Walker; 'Bill Lake'; 'CCIE Study'
Subje
I don't know yet as i have just finished building the server for the next
part of my studies.. but every time i launch the web interface and log in i
get the same.. ?
From: Bill Lake [mailto:whl...@gmail.com]
Sent: 05 November 2011 23:40
To: Duncan Hamilton-Walker
Cc: CCIE Study
Su
Dear All,
Can anyone please shine some light on my problem message below;
I have resync the JTAPI client a few times with the same result..
Cisco JTAPI Client
An error has occurred while trying to resynchronize the Cisco JTAPI Client.
Please try Cisco JTAPI Resync in Cisco Unified CCX
The cable length command is not overly important in a lab.. but the config
looks good
Sh ccm-manager - should see active call manager here
Sh isdn status - layer two up - MULTIPLE_FRAME_ESTABLISHED
HTH
D
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@online
Hi guys,
I'm no longer perusing the CCIE cert, so i have my seat for sale on the 10
day bootcamp..
dates are:
November 28 to December 9, 2011 San Jose, CA, US
Ipexert have confirmed i can transfer the seat to a different name.
Contact me for further details.
Thanks
Duncan
Hi guys,
I'm no longer perusing the CCIE cert, so i have my seat for sale on the 10
day bootcamp..
dates are:
November 28 to December 9, 2011 San Jose, CA, US
Ipexert have confirmed i can transfer the seat to a different name.
Contact me for further details.
Thanks
Duncan
_
Hi guys,
I'm not longer going to pursue the CCIE cert.. so i have my seat for sale
on the 10 day bootcamp on the following dates..
November 28 to December 9, 2011 San Jose, CA, US
Ipexpert have confirm the seat can be transferred to a different name.
Contact me for further detials
thanks
D
Dear all,
I have 30 vrack vouchers to sale.. $20.00 per voucher - Paypal only
I'm not going to use them.. so email me if interested
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Dear all,
I have 30 vrack vouchers to sale.. $25.00 per voucher - Paypal only
I'm not going to use them.. so email me if interested
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Dear all,
I have 30 vrack vouchers to sale.. $25.00 per voucher - Paypal only
I'm not going to use them.. so email me if interested
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Now 30 available.
15 sold, many thanks Nish
From: Duncan Hamilton-Walker [mailto:dun...@rosethorn.plus.com]
Sent: 12 April 2011 13:21
To: 'ccie_voice@onlinestudylist.com'
Subject: RE: [OSL | CCIE_Voice] vRack Vouchers for Sale
Dear all,
I have 45 vrack vouchers to sal
Dear all,
I have 45 vrack vouchers to sale.. $25.00 per voucher - Paypal only
I'm not going to use them.. so email me if interested
Thanks
Duncan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexp
Dear all,
I have 45 vrack vouchers to sale.. i'm not going to use them.. so email me
if interested..
Thanks
Duncan
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
NDA !!!
"I have all the lab as well as solutions for the lab.If anyone is
interested in knowing what lab i have got and what solution i
have done"
> Congrats to you man! Whatâs your lucky CCIE #??
>
>
>
>
>
> From: ccie_voice-boun...@onlinestudylist.com
> [mailto:ccie_voice-boun...@onlinest
Dear All,
I have 25 vouchers available.. email me for price and paypal address
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Can someone please tell me why my SIP phones keep registering and
unregistering themselves every 10-20 seconds
??
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I have seen this problem.. never managed to figure it out..
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of ccieid1ot
Sent: 21 July 2010 17:04
To: Mac GroupStudy
Cc: ccie_voice@onlinestudylist.com; cisco-v...@puc
Thats the part i don’t understand... Sub is primary call processing..
From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: 16 July 2010 15:48
To: Duncan Hamilton-Walker
Subject: Re: [OSL | CCIE_Voice] Task 5.1 new dial plan
sorry, that wasn't right troubleshooting step. would not
Service is running and replication is good for both pub and sub
From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: 16 July 2010 15:28
To: Duncan Hamilton-Walker
Subject: Re: [OSL | CCIE_Voice] Task 5.1 new dial plan
make sure that CCM service is running on the Sub and check
Ok.. But i have checked the PG and no other address than what i have added
below.. are in the configuration.
From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: 16 July 2010 15:26
To: Duncan Hamilton-Walker
Cc: Roger Källberg; ccie_voice@onlinestudylist.com
Subject: Re: [OSL
Hi,
Is it possible to change the way a CUCM page looks..
IE add/remove columns/detail etc..
Thanks
D
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
It is currently in the HQ device pool, which has the CCM group with both the
SUB and PUB as members off ..( in that order)
From: Miron Kobelski [mailto:findko...@gmail.com]
Sent: 16 July 2010 14:38
To: Duncan Hamilton-Walker
Cc: CCIE Voice Maillist
Subject: Re: [OSL | CCIE_Voice] Task 5.1
gatekeeper
zone local US ccielab.com
zone local Spain ccielab.com
zone remote PSTN-WAN ccielab.com 10.10.100.2 1719
no shutdown
From: Roger Källberg [mailto:roger.kallb...@yahoo.com]
Sent: 16 July 2010 14:47
To: dun...@rosethorn.plus.com
Cc: ccie_voice@onlinestudylist.com
Subject: R
Hey Everyone,
For some reason my SUB is being rejected by the gatekeeper
Any ideas please..
Thanks
Duncan
HQ-RTR#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
CallSignalAddr Port
Its ok Graham.. you made me think and check configs on non CUCME routers !!
From: Graham Hopkins [mailto:ghopk...@wolf-rock.co.uk]
Sent: 07 July 2010 08:58
To: Duncan Hamilton-Walker
Cc: CCIE Voice Maillist
Subject: Re: [OSL | CCIE_Voice] SIP Phones on CUCM
Here's a lesson - rea
Hi All,
So for some very strange reason ... My SIP phones that registered to CUCM
(ver 7.1.2.2-2)
Have now decided to continually register and unregister themself every
10-20 seconds
I have the standard SIP profile applied, this has not happen before..
Any ideas ?
Thanks
Dunc
Hi Roger,
Changed the values as you mentioned... the priority is now as it should be..
I least i know its because of the SUB rebuilt..
Thanks for your help..
Kind regards
Duncan
From: Duncan Hamilton-Walker [mailto:dun...@rosethorn.plus.com]
Sent: 05 July 2010 11:11
To
Hi Roger,
Thanks for answering my problem.. i will make the changes you have
suggested.
Kind regards
Duncan
From: Roger Källberg [mailto:roger.kallb...@yahoo.com]
Sent: 05 July 2010 09:08
To: dun...@rosethorn.plus.com
Cc: ccie_voice@onlinestudylist.com
Subject: WB1 LAB4A - Task 4.6 G
ensure that _1 and _2 will be
there.
HTH
Matthew Berry
Vitals:
GVoice: +1.612.424.5044
Gmail: ciscovoiceg...@gmail.com
Skype: ciscovoiceguru
Twitter: ciscovoiceguru
On 7/4/2010 7:52 AM, Duncan Hamilton-Walker wrote:
Dear All,
With regards to the above task... I have followed the WB
uncan Hamilton-Walker wrote:
Dear All,
With regards to the above task... I have followed the WB, checked the PG and
watched the Walk-thro video..
Done everything as per required... But why is my SUB gk-trunk coming in as
_3 when it should be _2
I have taken the gatekeeper and trunk out of CC
Dear All,
With regards to the above task... I have followed the WB, checked the PG and
watched the Walk-thro video..
Done everything as per required... But why is my SUB gk-trunk coming in as
_3 when it should be _2
I have taken the gatekeeper and trunk out of CCM and recreated them. Put t
: 02 July 2010 15:25
To: 'Duncan Hamilton-Walker'; 'Matthew Berry';
ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] MGCP
Mgcp / no mgcp is a very important command when dealing with MGCP gateways!
If not using trombone then always do no mgcp/mgcp for any changes
ciscovoiceguru
On 7/2/2010 8:36 AM, Duncan Hamilton-Walker wrote:
Hi All,
Why would my BR1-RTR being registering with UCM on the serial sub interface
10.10.111.2
When i have configured it to use the Loopback0 for source packets..
10.10.110.2
Plus i think is not helping with making any
. If it doesn't
work, please send your config.
Matthew Berry
Vitals:
GVoice: +1.612.424.5044
Gmail: ciscovoiceg...@gmail.com
Skype: ciscovoiceguru
Twitter: ciscovoiceguru
On 7/2/2010 8:36 AM, Duncan Hamilton-Walker wrote:
Hi All,
Why would my BR1-RTR being registering with U
Hi All,
Why would my BR1-RTR being registering with UCM on the serial sub interface
10.10.111.2
When i have configured it to use the Loopback0 for source packets..
10.10.110.2
Plus i think is not helping with making any call out of the gateway !!
Thanks
Duncan
_
Finally fixed it by rebuilding the SUB and syncing the DB.. But don't know
what the problem was.. so frustrating.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Duncan
Hamilton-Walker
Sent: 30 June 2010 11:56
To: ccie_
...@onlinestudylist.com] On Behalf Of Duncan
Hamilton-Walker
Sent: 30 June 2010 00:21
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Why are my SIP Phones registering to the PUB
Dont understand only my SIP phones are registering to the PUB, when the SUB
is set are the primary Server in the Cluster
Dont understand only my SIP phones are registering to the PUB, when the SUB
is set are the primary Server in the Cluster
Cisco 7940 SEP000D65ECB991 BR1 PHN 2
Default SCCP Registered with 10.10.210.11
10.10.201.252
Cisco 7941G-GE
Thanks Dan
From: Dan Russell [mailto:danfruss...@gmail.com]
Sent: 29 June 2010 21:23
To: Duncan Hamilton-Walker
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] dbreplication
Duncan,
Replication status of 2 for each node is good (replication complete).
Another way to
Thanks Steve.. just needed to be sure
From: steve dickey [mailto:scdic...@corb.net]
Sent: 29 June 2010 21:05
To: Duncan Hamilton-Walker
Subject: Re: [OSL | CCIE_Voice] dbreplication
A dbreplication status of 2 is an indication that things are healthy. That
output looks good for your
I have just realised that the cluster values are added together from the
node values...!! doh...so i take it this is good ?
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Duncan
Hamilton-Walker
Sent: 29 June 2010 20:47
To: ccie_voice
Hi All,
Can someone please help me out with an concern..
In the RTMT it shows the following
Node number of connections
Replicates created Replication status
10.10.210.10 50
425
48 matches
Mail list logo
