plz if anyone can answer me
did I have to do something especial in codec section than the call should
work between phones with G711 and between branches with G729 to get full
score instead of ((0)) and if I didn’t requested in HA to make connection
with Site C by dialing 4 digits so I have to make
I'm going to my first attempt on 7 May In Dubai, what about the environment
there and your advise for the first time ;(
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looki
pressure and if you know where to look in
documentation, it can make a difference when you try to recall. You
don't have to remember it all, just be able to reference to it when needed.
hth
-- Mustafa
Matthew Berry wrote:
> All -
>
> I've been going through the System Admin
In system parameters, if you select partial match, MVA will always ask
your number and then PIN. Change it to exact match and if you have
correct caller ID coming in and it matches then you get only asked for
PIN. I've tested it with both h323 and mgcp gateways.
-- Mustafa
sean hurr
In 12.2(44), the cos-dscp marking is correct CS3 or 24. In "Ask the
expert" Ben has provided that to be IOS version for lab. Another
important thing that has changed and not updated in SRND is the ability
to put both a priority queue and service policy on the interface.
-- Must
.
>
>
But according to pre-requisites of LAB exam candidate, attending in
360 program SHOULD BE mentioned than!! :D
Hence WE _adamantly_ will rejoice if Cisco to include it in the
eligibility of exams. ;;)
my 2c!!!
//Mustafa
___
For more in
You have a dial-peer with 3600 and then a ephone-dn with 3600.
-- Mustafa
Omotayo wrote:
> Working on Volume 2 lab 6. integrating the cme with the unity
> connection. below is my config on the cme
>
> when i press the message button on extn 3002. it gives a bust tone
>
When you set the priority to 0, it effectively disables that gateway
route for particular prefix. Prevents routing loops. If you don't add
the command, then by default BR2-RTR will have priority of 5, if in the
same zone as UCM.
-- Mustafa
iy...@nationwide.com wrote:
>
> I
whats the direction of call? Previous debug has bandwidth 160, which is
16k for g729 and this one is showing bandwidth 1280 which is 128k for
g711. So this call leg debug is showing is g711 is being requested somwhere.
-- Mustafa
Jeff Price (jeffpric) wrote:
> Here is the output of comm
GK seems to be routing the call. Do you get a busy tone when the call is
unsuccessful? Have you configured an xcoder anyway on CME?
-- Mustafa
Jeff Price (jeffpric) wrote:
> I'm looking through this as I'm sending. I also wanted to note that I
> set the Service Parameter &quo
figuration/guide/ve_book/ve_book.html
, it details how to configure gatekeeper with CUBE and its a good read.
-- Mustafa
Jeff Price (jeffpric) wrote:
>
> Hi everyone,
>
> I’m having an issue with my gatekeeper. When calling from CUCM to GK
> to CME, the calls go through. I
match. Make sure that you are matching and the pt/css
is also exclusive.
Device pool xform overrides xform directly configured on the phone.
-- Mustafa
Cristobal Priego wrote:
> Hello,
>
> I know this has been posted quite some times.
> I'm configuring + dialing on my lab an
t is being asked is to allocate 25% bandwidth to queue 1 of
the ports that have phones connected to it. It doesn't ask to prioritize
anything.
-- Mustafa
Pavan wrote:
> Scott,
> In my opinion enabling / disabling the priority queue has no effect on
> your requirement. Q1 will be lim
n CME but also
configuring the MWI extensions in CUE. Whereas sub-notify reduces a few
commands.
I've started using sub-notify. Any drawbacks or issues with using
sub-notify?
-- Mustafa
___
For more information regarding industry leading CCIE La
ed (return code = 0x107)
-- Mustafa
Paul Dardinski wrote:
>
> Angel,
>
> Here is the call for egress (from UCM to BR2):
>
> HQ_Rtr(config-gateway)#do sh gatek call
>
> Total number of active calls = 2.
>
> GATEKEEPER CALL INFO
>
>
&g
Will not bring back the friend you've turned away.
So may I suggest the secret of Christmas
Is not the things you do at Christmas time,
But the little things you do all year through.
Merry Christmas & A Happy new year!
Cheers,
Mustafa
On Sat, Dec 26, 2009 at 12:27 AM, Vik Malhi wrote:
t http://www.messagelabs.com/email
> __
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
--
17 matches
Mail list logo