Re: [OSL | CCIE_Voice] Forwarded calls from CME phones to CUE arecleared if call coming from CCM

, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On May 22, 2008, at 2:36 PM, Onur Tufekci wrote: Can you please post all the config on R2? On Thu, May 22, 2008 at 4:15 PM, Sanchez Galarza, Gustavo - (Col) [EMAIL PROTECTED] wrote: Hi

[OSL | CCIE_Voice] Forwarded calls from CME phones to CUE are cleared if call coming from CCM

Hi: I have a very estrange issue: I make a call from a CCM phone to CME phone and the call is forwarded by no answer to CUE Voicemail but immediately I receive a busy tone in CCM. I see that the CME invoke the transcoder but the call doesn't proceed. If I make a direct call from CCM

[OSL | CCIE_Voice] OFFRAMP/ONRAMP AND UNITY IP FAX

Hi: Is the T37 functionality of the H323 gateways and Cisco Unity IP Fax supported on E1-R2 or only on PRI? Thanks Gustavo Sánchez

Re: [OSL | CCIE_Voice] QoS marking based on port

I think you should use a final ACE statement set qos acl ip POD12_SERVER trust-dscp any in order to not mark-down any RTP traffic like MOH, ANN, CFB or MTP to DSCP 0 (the default ACL). See the ACL flowchart:

Re: [OSL | CCIE_Voice] FW: Second Try: LFI in the same interface for 2 PVC's, one of them a High Speed Link

Yes. For the LAB preparation. Gustavo Sánchez From: Mark Snow [mailto:[EMAIL PROTECTED] Sent: Miércoles, 02 de Abril de 2008 12:40 p.m. To: Sanchez Galarza, Gustavo - (Col) Cc: ccie_voice@onlinestudylist.com; [EMAIL PROTECTED] Subject: Re: [OSL

[OSL | CCIE_Voice] FW: Second Try: LFI in the same interface for 2 PVC's, one of them a High Speed Link

Hi Vik, Mark: Could you provide me any suggestion/comment? Thanks in advance Gustavo Sánchez - Original Message From: Sanchez Galarza, Gustavo - (Col) [EMAIL PROTECTED] To: ccie_voice@onlinestudylist.com Sent: Sunday, March 30, 2008 9:21:40 PM Subject: [OSL | CCIE_Voice

[OSL | CCIE_Voice] Second Try: LFI in the same interface for 2 PVC's, one of them a High Speed Link

Hi: I would appreciate some comments. I have the following scenario: In HQ I have a physical serial interface with 2 PVCs: DLCI 201 to BR1 with CIR 384kbps and DLCI 202 to BR2 with CIR 1544kbps. I assume I need to configure frame-relay fragment for DLCI 201 with fragment size equal

[OSL | CCIE_Voice] LFI in the same interface for 2 PVC's, one of them a High Speed Link

Hi: I have the following scenario: In HQ I have a physical serial interface with 2 PVCs: DLCI 201 to BR1 with CIR 384kbps and DLCI 202 to BR2 with CIR 1544kbps. I assume I need to configure frame-relay fragment for DLCI 201 with fragment size equal to 480 but my questions are: 1.

[OSL | CCIE_Voice] Bandwidth for g729 call in priority queue when using MLPoFR

Hi: Im not sure about what should be the bandwitdth for 1 voice call in G729 in the priority queue of LLQ if I'm using MLPoFR: I use 50 PPS, but what should be the packet size? a) (6 + 1) bytes of Frame Relay/MLP + 40 (IP/UDP/RTP) + 20 RTP = 26,8kbps b) (6 + 1) bytes of Frame Relay +

[OSL | CCIE_Voice] QOS::MLPoFR

Hi: If I need to configure MLPoFR using virtual-template is correct to deactivate frame relay adaptive shaping with the command: no shape adaptive ? like in the following example? Policy-map ppp class class-default shape average cir bc be no shape adaptive map-class

Re: [OSL | CCIE_Voice] DSP Registration -CME

The commands under telephony-service are missing: Try: telephony-service sdspfarm units 1 sdspfarm transcode sessions 6 sdspfarm tag 1 cmexcoder Gustavo Sánchez From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Viernes, 07 de Marzo de