Hi All,
I saw nice comments from all of you guys. after the exam, I saw real like
exam papers in the out side. May be cisco has look in to this matter. After
taking my exam I failed unfortunately and I know most of the people who
passed the exam knew which lab comes. As
Nicolas MICHEL said CCIE L
Hello CCIE VOICE FORUM TEAM / My Friends,
Actually I was joined with CCIE VOICE team in APRIL 2013 and had a nice
journey with all of you. However due to some reasons I was not able to make
the final goal at first time. even though I made a really nice journey and
learned many things together. It
t; On Tue, Jul 30, 2013 at 12:31 AM, ie ravindra wrote:
>
>> Hi Amdo,
>>
>> I have faced the same thing when I am in the real lab all local site
>> calls went failed. But every thing correct. I can't understand the logic
>> behind of that. Let me explain some w
Hi Amdo,
I have faced the same thing when I am in the real lab all local site calls
went failed. But every thing correct. I can't understand the logic behind
of that. Let me explain some workaround I did.
I changed the location of Site C to Hub none in the lab in my lab day. then
local calls goes
Dear All,
I got CCIE lab exam for the first time and I am really unsatisfied about
the marks I got. unfortunately I was not able to complete my lab properly
but I have configured few sections in good manner. Unfortunately I didn't
knew that I removed a cable from a phone and replugged due to phone
check for any firewalls. most reasonable answer is that.
Thanks,
Ravi
On Tue, Jun 4, 2013 at 10:12 PM, Karen Johnson wrote:
> hi all,
>
> When i try to install license from FTP to CUE, it failed and gave me error
> message :
>
> "Download error, Can not download cue-vm-license_12mbx_7.0.1.pkg e
Dear All,
If question asked to markdown all CUE traffic which goes to CUCM what will
be the protocols. As I understood below are the protocols. and what would
be the best approach mark down that traffic. even IMAP / SIP not used all
the times if we added it safe side will they deduct our marks ?.
on 2 :
> any any eq 5060 > This is destination port
> any eq 5060 any -> This is source port
>
>
> On Mon, May 27, 2013 at 4:06 AM, ie ravindra wrote:
>
>> Dear Experts,
>>
>> What is the mostly recommended way to mark all in/out traffic to specif
Dear Experts,
What is the mostly recommended way to mark all in/out traffic to specific
ip including protocol.
Assuming, we required to match all sip traffic which goes and in and out
from specific port and at the same time it requires to match the source and
destination as to be identified.
Que
Dear All,
Whats is the real meaning of MGCP tear down. Is it means dropping a call or
, What ? thanks for your valuable input.
Ravi,
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP o
Dear All,
Whats is the real meaning of MGCP tear down. Is it means dropping a call or
, What ? thanks for your valuable input.
Ravi,
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP o
Dear All Experts,
Where we can obatin DHCP static origin file template officially.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check o
Which means you have not subscribed service to the phones. I believe that
you have readded voicemail without selecting Enteprise Subscription.
-- Forwarded message --
From: CCIEing
Date: Wed, May 8, 2013 at 7:06 PM
Subject: Re: [OSL | CCIE_Voice] VM Message button gives "No service
Hi Kevin,
What is this Lab 8 story. Is it means did they released their next version
of blue print of is it just new exam lab ?. Can you share the information
if you have some. My exam has been rescheduled due to some reason. However
I just only remains one month to my studies. :-(. Sadly.
Thanks
Dear All,
For the AAR is it permitted to USE SLRG and PLUS routing in the lab.
Thanking you as always,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a
Hellow Experts,
how we can use ccm-manager commands to achieve mgcp configuration. How we
could carefully use in the lab.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP
As I know no preference means he will take the top-down order with
ascending dial-peer order based on pot number. I believe if you stated
preference you can bypass the order of dial-peer
Thanks,
Ravi
On Wed, Apr 10, 2013 at 6:13 AM, Josh Petro wrote:
> Hi All,
>
> I know this is a silly questi
Hi Ikizoo,
Sorry for my wrong understanding if answer is wrong. The answer is you can
change, add or remove the + sign when it receives by the CUCM router or
CUCM. I just explained the Technical Procedure.
Thanks,
ravi.
On Sun, Apr 7, 2013 at 3:14 AM, Ryan Maxam wrote:
> You can use a voice
t;> 101 Voice
>> 102 Data
>>
>> lo0
>>
>> <etc.>
>>
>>
>> The idea is that you type out the IP addresses once. Then copy/paste into
>> your other config notepads / web interfaces as needed. I keep the basic.txt
>> file up
Is there any ways to adapt with IP address scheme. ?
Thanksm
Ravi.
On Wed, Apr 3, 2013 at 6:46 AM, Josh Petro wrote:
> Thanks much to all who replied! Strategy seems to be key from what I'm
> hearing here and elsewhere.
>
> On Tue, Apr 2, 2013 at 4:45 PM, wrote:
>
>> All testing after you fi
I believe it CRC4 mostly using.
controller e1 0/0/0
framing CRC4
linecode HDB3
On Tue, Apr 2, 2013 at 11:13 AM, CISCO CCIE VOICE wrote:
> Hi Guys,
>
> Regarding E1 Framing if the question states the below
>
> FOR E1 use the following:
>
> switch type:net5
> framing :CRC
> linecode :HDB3
>
> t
I have seen this also. There are three commands. isdn outgoing display-ie
/ isdn outgoing ie display both commands are same as I heard. but there is
a another command called facility ie. don't know what the use is. I have
read in many document to use facility ie if display ie or ie display not
wo
Dear All,
Happy april 01st for all of you.. :-). Is there bug in voice LAB which we
need to use intra region codec as forced g729. If so what we need to
consider.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, plea
Hi Folks,
dialplan-pattern 1 902312... extension-length 4...
when it comes to voice translation rule is it mandatory to remove above
command.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexper
Hellow Experts,
I made my exam payments today for my coming in CCIE exam. until today I was
not went through lab practice much. But I am expecting to start it today.
Is there any way to accelerate learning practice since I am busy with
office tasks also. This is my first attempt.
Thanks,
Ravi.
__
Dear All On Board,
I am in approach for the exam in coming June. Unfortunately due to my
fathers illness I was not covered all the subject areas. I have covered
only conceptual parts. I am not wanted to loose my exam at the first time.
I want to do it however with outstanding performance. What ar
hi folks,
I have two questions in QOS.
1. When classifying a qos traffic for CTI Cube I used access lists.
ip access-list extended CTIQBE
match tcp any any eq 2748
match tcp any eq 2748 any
Question is there any other method to clasify traffic in QOS CTI CUBE
?
2. When bandwi
Same Here. I Didn't enabled that ever.
Thanks,
Ravi.
On Fri, Feb 15, 2013 at 8:27 PM, Cory Gray wrote:
> Neither have I
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Jason Lee
> *Sent:* Friday, February 15, 201
Hi folks,
As I know there are certain control in CUCME using web administration. I
believe if we used web administration page over CME configuration part
might easier. But is it permitted during the lab time. How we can aproach ?
Thanks,
Ravi.
___
For m
Do not we need to set max trans-coding sessions in sdsp farm category under
telephony-service ??
On Wed, Feb 13, 2013 at 8:19 PM, Craig Hill (crahill) wrote:
> It would be helpful to see your complete config. There are a few items
> that need to be checked such as your voice class custom-cptone
Hi Mates,
1. I have paste some configs that i Bought from SRST example. What I want
to know is the particular router running H323 gateway. What is the use of
Bolded ccm application and fall back mgcp commands.
*call application alternate default
ccm-manager fallback-mgcp*
2. how we can separate
Hi All my Friends,
If the question is asked for configuring busy out few channels from MGCP
gateway is it just enough if we used. But if it not mentioned how many
channels we need to busy out what woul be correct. Just open a all
channels or keep busy few ??
*pri-group timeslots [1]-[X] service
Hi Friends,
I have a following questions on international dial plans as in the lab.
If we assumed we do have
HQ | 1-576201*1001* - Extension 1001 in USA X City [1 National Access Code
]
BR | 1-312301*2001* - Extension 2001 in USA Y City [1 National Access Code
]
London | XX*YY*2131*9XXX* - Exte
I have simulated HQ and BR 2, I configure MGCP in HQ - R1 and BR2 -R1 as
H323 to CM Cluster.
When I am initiating a call from CUCM HQ Device pool I have instructed it
to route through PSTN and Go to BR2 through CUCM. fortuately call is
hitting dial-peer at BR2. but call is not route through to BR
Hi Mates ,
I have few questions on the real lab just to make up my speed. Thanks for
all you guys I believe I have made my hardest part "DialPlan" two easier.
my only clue is now AAR. but thanks for Jsutin and Cory I am evaluate those
today.
Now I got another problem. I am still following technolo
Hi Mates,
As per my understanding AAR is triggering when if CAC enabled and if for
some reason that call cannot be completed. Therefore we need route that
call to the PSTN. The mandatory requirement is the both extensions must
register to the same call manager clusted. If Caller A calling to User
>
>> -finally, go to the serial sub-interface and assign the command "ip rsvp
>> bandwidth X." On this line the bw is 24*Number of calls + 16 (call setup
>> for a single call
>>
>> -make sure the IOS MTP is registered in CUCM
>>
>> -when placing a
Hi All,
Do we need to enable ip rsvp bandwidth command when we configure location
based CAC.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job
Hi all,
When configuring Location Based Call admission control if we assumed that
we need to configure only 5 g729 calls needs to be send what would be the
best config. As I know it should be 24XN + 16 should be the bandwidth which
requires. 24 X 5 +16 of only 24X5 is enough.
Thanks,
Ravi.
__
Hi My Friends,
is it correct if I stripped the caller ID from the router when it asks for
hide the caller ID ? for lab exam or either what is the recomended way.
Thanks,
Ravi,
___
For more information regarding industry leading CCIE Lab training, pleas
thanks for the great idea
On Sun, Jan 27, 2013 at 9:34 AM, Abel ... wrote:
> Is possible, because close to the lab I was studding around 16 hours per
> day, that means eating over the keyboard minus some minutes to stretch and
> walkout.
>
>
> On Sat, Jan 26, 2013 at 9:09 PM, Pascal PRUDENT wro
Dear All ,
Thanks for the answers you given for my last questions. for the above what
are the digits will forwarded to PSTN. How we can use prefix command. any
way sorry for my wrong english.
1] dial-peer voice 900 pots
destination-pattern 9[2-9]..$
port 0/0/0:23
2] dial-peer voice 901 pots
Dear all,
those day I am struggling on dial-plan section and gateway section. which
is very hardest part for me. Is there any specific way to answer on Dial
Plan Qusestions.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab tra
is it posible to create a H323 or SIP or CME on MGCP enabled gateway. is
there any specific command needs to be placed.
Thanks,
Ravi.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or
Hi All,
What is the idea behind of numbering plan, Such as ISDN , NATIONAL , etc.
How it can be applied in real world.
Thanks,
IE.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or C
45 matches
Mail list logo
