Hi List,
during my last Remote-Rack Sessions i noticed that the B-Channel Maintenance
Status Parameter is not workking properly. Always when i configured it and
restartet the CCM Srevice and the Gateway itself, it is working for some calls.
And suddenly the Gateway is trying to call out over
When you try this again what does Perfmon tell you the service of the
channels?
0, 1, 2, 3?
On Sun, Feb 22, 2009 at 11:07 AM, Robert Schuknecht rschukne...@gmx.dewrote:
Hi List,
during my last Remote-Rack Sessions i noticed that the B-Channel
Maintenance Status Parameter is not workking
Did you check off status polling on the device config for the circuit?
On Feb 22, 2009, at 12:10 PM, Ryan Trauernicht wrote:
When you try this again what does Perfmon tell you the service of
the channels?
0, 1, 2, 3?
On Sun, Feb 22, 2009 at 11:07 AM, Robert Schuknecht rschukne...@gmx.de
Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage
Lab Certifications.
From: Robert Schuknecht rschukne...@gmx.de
Date: 22 Feb 2009 18:07:17 +0100
To: OSL Group ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] B-Channel Maintenance not working properly
Of Vik Malhi
Sent: Sunday, February 22, 2009 12:33 PM
To: Robert Schuknecht; OSL Group
Subject: Re: [OSL | CCIE_Voice] B-Channel Maintenance not working
properly
I've battled with this service parameter for over 5 years. It doesn't
work
properly- I would use Top-Down with a fractional PRI