yes, it work.
Seen from "debug mgcp packet' , endpoint unknown, so i move to slot in CCM
setting and fine now
--- On Sun, 10/4/09, Nara Shikamaru wrote:
From: Nara Shikamaru
Subject: Re: [OSL | CCIE_Voice] BR-2 E1 as MGCP gateway
To: "Andrew Lythgoe"
Cc: ccie_voice
wrote:
From: Andrew Lythgoe
Subject: Re: [OSL | CCIE_Voice] BR-2 E1 as MGCP gateway
To: "anil batra"
Cc: ccie_voice@onlinestudylist.com, "Erwan Erwan"
Date: Sunday, October 4, 2009, 3:13 PM
Hi Erwan,
In your config for BR2 I see you have:
controller E1 0/2
clock sourc
. show controllers
> 4. show isdn status
> 5. debug isdn q921
>
> Regards,
> Andrew
>
>
>
>
>
>
>
>
> anil batra wrote:
> > Can you let us know your outputs for ..
> >
> > 1. debug isdn q921
> >
> > 2. sh isdn status
gt;
>
> From: Erwan Erwan
> Subject: [OSL | CCIE_Voice] BR-2 E1 as MGCP gateway
> To: ccie_voice@onlinestudylist.com
> Date: Sunday, October 4, 2009, 4:32 AM
>
> hi,
>
> I tried to run BR-2 E1 as MGCP gateway, but can't bring the*
>
Can you let us know your outputs for ..
1. debug isdn q921
2. sh isdn status
--- On Sun, 10/4/09, Erwan Erwan wrote:
From: Erwan Erwan
Subject: [OSL | CCIE_Voice] BR-2 E1 as MGCP gateway
To: ccie_voice@onlinestudylist.com
Date: Sunday, October 4, 2009, 4:32 AM
hi,
I tried to
hi,
I tried to run BR-2 E1 as MGCP gateway, but can't bring the isdn up , any
advice appreciated. tks
Here is config
-
BR-2
controller E1 1/0/0
pri-group timeslots 1-3,16 service mgcp
!
interface Serial1/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary