You need to check out redirect number delivery option in the SIP trunk
configuration on the call manager
19.01.2011 17:46 пользователь "mihal caro" написал:
> Hi All
>
> I'm having problems with the Cisco MVA when is set it up on the SIP
gateway
> but with H323 it works great.
>
> I can get the I
I was just wondering if forcing MTP (set mtp requiered) on a SIP trunk, will
let it recognise the dialled digits. will lab it up tomorrow.
Regards,
On Wed, Jan 19, 2011 at 4:15 PM, Miron Kobelski wrote:
> One more thing:
> http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16921.html
It's in the CUCM 7x SRND which is also available in the lab.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/uc7_0.html
On 19 January 2011 19:58, mihal caro wrote:
> Hi Miron
>
>
> thanks for the reply
>
> I've try ed Sip-Notify same issue. I can get it work with h323. I can
> always
Hi Miron
thanks for the reply
I've try ed Sip-Notify same issue. I can get it work with h323. I can always
add the gateway as h323 and SIP but I just want make sure that Cisco will
not remove any points from my lab test because of that.
Roger
Can you please send me that Cisco link that says SI
Maybe the next point is your problem:
"Mobile Voice Access support for SIP VXML gateways requires Unified CM
7.1(3) or later release." (CUCM7 SRND).
Greetings
..
Hi
One more thing:
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg16921.html
You can always add the same physical router as 2 logical gateways on CUCM by
binding SIP/H.323/MGCP signaling to different interfaces.
On Wed, Jan 19, 2011 at 15:34, mihal caro wrote:
> Hi All
>
> I'm havi
Hi,
Although I've never tried it, it looks like DTMF interoperability issue. If
you send rtp-nte from the GW, then it's not recognized by MVA media
resource. Try out-of-band DTMF signaling. H.245 alpanumeric counterpart in
SIP is SIP-NOTIFY.
HTH
kobel
On Wed, Jan 19, 2011 at 15:34, mihal caro
MVA I think works only with h323, so you would need to configure h323
hairpining.
basically accept call from SIP gateway, then route it back to the gateway
via h323. that's the only way I think that would work.
or try to put MTP between in the call see if that works.
Regards,
On Wed, Jan 19, 201
Mobile Voice Access is accessed by calling a system-configured DID number
that is answered and handled by an H.323 or SIP VoiceXML (VXML) gateway. The
VoiceXML gateway plays interactive voice response (IVR) prompts to the
Mobile Voice Access user, requesting user authentication and input of a
numb
Hi All
I'm having problems with the Cisco MVA when is set it up on the SIP gateway
but with H323 it works great.
I can get the IVR working with SIP but when I press 1 to dial an internal
extension nothing happens and the call drops after 10 sec. If I try the same
thing but change the dial-peer to
10 matches
Mail list logo