Från: Goran Selthofer [seltho...@gmail.com]
Skickat: den 17 oktober 2010 20:54
Till: Cristobal Priego
Kopia: ccie_voice@onlinestudylist.com
Ämne: Re: [OSL | CCIE_Voice] Digit Manipulation on H323
Hi C.P,
Digit manipulation will be done on CUCM and will be sent to H323 as
thank you all for your comments
I've been debugging the gateway
i have digit manipulation on the rp, rl. I also have a called pattern
transformation css applied to the h323 gateway
i've reset the GW multiple times
however when i make the call
this is what i see
Exclusive, Chan
To set Called and Calling type on H323 GW it is preferred to use
voice-translation rules on the gateway so that if you go into srst you dont
have to do it again. However if no srst you can set it in CUCM.
HTH,
Prashant
On Sun, Oct 17, 2010 at 3:02 PM, Cristobal Priego wrote:
> thank you very mu
thank you very much it really make sense
and what would happen to the call type ?
if i use a called party transformation pattern
to set the called type to: national, subscriber, intl,
on the MGCP gateway it's no problem the call is sent out on the PRI with the
proper digit manipulation and the
Hi C.P,
Digit manipulation will be done on CUCM and will be sent to H323 as well,
and the preference would be on the manipulations done within RL rather than
on RP.
So, i.e.
RP is 91608.[2-9]XX and
- if you put pre-dot and prefix 608 under RP,
- and then you also do pre-dot and prefix 9 for sp
hello all,
I'm working on the workbook 1 lab 5
and i noticed what when i do digit manipulation either on the RP, RL or by
using transformation patterns, the changes aren't sent to the GW, if my
protocol is H.323 usually I need to create some dial rules on the Voice
Gateway
when I'm using MGCP i