Ahoy one and all:
I am a struggling voice aspirant. Got my home lab setup and started IPE
volume I workbook. I have two 3550 switches, one for HQ and the other for
BR1.My pstn phone is connected to the BR1-3550. The pstn configuration is
similar to the IPE pstn config (Vol 1, lab4). I am able to p
ubject: [OSL | CCIE_Voice] Home lab PSTN phone woes
Ahoy one and all:
I am a struggling voice aspirant. Got my home lab setup and started IPE volume
I workbook. I have two 3550 switches, one for HQ and the other for BR1.My pstn
phone is connected to the BR1-3550. The pstn configuration is simila
inestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Voiper
> *Sent:* 29 September 2011 13:41
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] Home lab PSTN phone woes
>
> ** **
>
> Ahoy one and all:
>
>
ure that your telephony-s has "max-dn >0, max-ephones
>0, ip source and create-cnf"
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Voiper
Sent: Thursday, September 29, 2011 8:41 AM
To: ccie_voice@onlinestudylist.com
Su
On the PSTN router, did you do "create cnf-files" under telephony service?
- Reply message -
From: "Voiper"
Date: Thu, Sep 29, 2011 8:41 am
Subject: [OSL | CCIE_Voice] Home lab PSTN phone woes
To:
Ahoy one and all:
I am a struggling voice aspirant. Got my home l
Thank you all for taking the time to help a beginner. Very much appreciated.
@ Stuart - I installed the correct IOS and then extracted the CME 7.0. Took
me a while to read the CME srnd, but it was fun.
@ Alan - I found I had my pstn router connected to SW1 and my pstn phone
connected to SW2. I p
With little akwardness I am back writing about my pstn dilemma. I have hit
the wall and thought it would be wise to consult you all than pull the rest
of my hair, and I did do so in the weekend :(
Here goes:
My home lab topology is based on the IPX one. However, I use a 3550 switch
for BR1 and hav
[OSL | CCIE_Voice] Home lab PSTN phone woes
With little akwardness I am back writing about my pstn dilemma. I have hit the
wall and thought it would be wise to consult you all than pull the rest of my
hair, and I did do so in the weekend :(
Here goes:
My home lab topology is based on the IPX one. How
Stuart
>
> ** **
>
> *From:* Voiper [mailto:datapack...@gmail.com]
> *Sent:* 03 October 2011 13:43
> *To:* Geoghegan, Stuart
> *Cc:* ccie_voice@onlinestudylist.com; Sears, Michael (msears)
> *Subject:* Re: [OSL | CCIE_Voice] Home lab PSTN phone woes
>
> ** **
&
Glancing at the config:
Your PSTN is on Vlan 10, yet you have your voice vlan setup as Vlan 20 on
FA0/16. Just run your phone on the access vlan or adjust your voice vlan to
10. Next you could setup a static IP and TFTP server on the phone. If that
works then switch back to DHCP and verify/trou
Thanks Chris, Stuart, Michael, Bkvalentine and Alan for your help. Along
with the tips, it was the oomph a beginner needed to get past the initial
road blocks.
Cheers,
Voiper
On Mon, Oct 3, 2011 at 12:01 PM, Chris Martin wrote:
> Glancing at the config:
>
> Your PSTN is on Vlan 10, yet you hav
an old config pointing to an old TFTP server.
>>>
>>> ** **
>>>
>>> Within the network settings try to change the phone from being DHCP using
>>> **#
>>>
>>> ** **
>>>
>>> Perhaps hardcode the IP address and TF
12 matches
Mail list logo