Check your isdn switch type.
Sent from my iPhone 4.
On Jul 18, 2011, at 9:46 PM, ccie_voice-requ...@onlinestudylist.com wrote:
MGCP Gateway reg issue (not l2 TEI or l3bind) (steven moran)
___
For more information regarding industry leading CCIE
Verify also lincode, framing, and clocking. I am not sure what the default is
on 26XX.
Sent from my iPhone 4.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
Dear all,
I am not sure what is going on here, I welcome all suggestions
I have rebuilt a new Pub and Sub environment (10.10.210.12 and 13)
I have reloaded the router without the controller config and triple checked
the config and built all of the ISDN connectivity again.
Here is what is
Hello Steven,
You do not show that you are using the following commands
ccm-manager config server
ccm-manager config
So I do not believe that the ISDN configuration on the CUCM will be applied,
only your configuration on the router, which is why you also have to type no
mgcp/mgcp to have
Bill,
thanks for the response, the idea from the IPExperts is to use the
ccm-manager mgcp command and specify a fractional E1 - all of the commands
for the gateway are done on the router (control/media bind commands) and the
define call-agent etc. I too have no issues using the 2811 router - all
CUCM does not support fractional PRIs in MGCP officially.
- Reply message -
From: steven moran smoran...@gmail.com
Date: Sun, Jul 17, 2011 8:45 pm
Subject: [OSL | CCIE_Voice] MGCP Gateway reg issue (not l2 TEI or l3 bind)
To: ccie_voice@onlinestudylist.com
Dear all,
thanks for all