Hello,
According to the last debug, your call is looping in the pstn ie, call hits
dial peer 100, then it hits dial peer 800, then the pstn sends the call back
to the br2 gw and call finally hits 32143003 dial peer (mva service), so
that leaves you with no channels available if you are working wit
Hello,
Still can get this to work
On Tue, Dec 1, 2009 at 4:14 PM, Omotayo wrote:
> hello,
>
> my MVA number is 32143003. when i dial it
>
> i get propted my remote destination number and pin which i enter as follows
>
> 2123942123#12345#1
>
> when i dial 900916745738932#
>
> my debug voice di
hello,
my MVA number is 32143003. when i dial it
i get propted my remote destination number and pin which i enter as follows
2123942123#12345#1
when i dial 900916745738932#
my debug voice dial-peer shows it hits the outgoing dial-peer 800, whic h is
dial-peer voice 800 pots
destination-patter
Hello,
1.- The call is looping in the pstn before hitting the "ccm" service, the
original called number is +3432143003, your "ccm" service pots dial peer has
an incoming called-number of 3432143003, make sure you hit that dial peer
from the beginning
2.- The final call that gets to the gw has a c
Hello Otto,
Made the call after logging in to the mobile voice access. get the message
from the annuciator "your call an not be completed as dialled please ask the
."
the output of debug isdn q931 and debug voice dialpeer is as shown below
Dec 1 02:57:49.557: //-1//DPM/d
Hello,
i willget the output ande send it to you
thanks
On Tue, Nov 24, 2009 at 5:24 AM, Otto Sanchez wrote:
> 1.- Are intl calls the only ones that fail?, which ones succeed?
> 2.- What is your Mobile Voice Access Directory Number (in ucm)?
> 3.- How are you dialling that intl number?,
> 4.- W
1.- Are intl calls the only ones that fail?, which ones succeed?
2.- What is your Mobile Voice Access Directory Number (in ucm)?
3.- How are you dialling that intl number?,
4.- What is your intl route pattern?
5.- Send the debug voip dialpeer of the outgoing gw if h323
6.- Send the debug isdn q931
Hello,
i was able t dial the mobile voice access. i was not able to dial an
innternational number after logging it. the call gets to the router but was
not ringing on the called phone
On Tue, Nov 24, 2009 at 4:57 AM, Otto Sanchez wrote:
> Check that your router outgoing voip dialpeer's destinati
Check that your router outgoing voip dialpeer's destination pattern matches
the mva number and length you defined in the Media Resources-> Mobile Voice
Access-> Mobile Voice Access Directory Number, otherwise your calls will be
dropped/disconnected,
Also, what number are you trying to dial?, is it
Hello,
i have configured Mobile access on the h323 gateway. i am able to callin.
when tried to call after logging in. i get the following message on debug
isdn q931 but the called number never rings
the CSS ( not the reruting CSS) of the remote destination has a partition
that points to the rout
10 matches
Mail list logo
