> dial-peer voice 102 voip
> preference 2
> destination-pattern 3300
> session target ipv4:
> dtmf-relay h245-alphanumeric
> codec g711ulaw
> no vad
Is site to site g711? Or is your CUCM local?
> application
> service cmm http:// Pub>:8080/ccmivr/pages/IVRMainpage.vxml
Did you get success
Sounds like you didn't set the MVA details under Media Resources.
I usually get these symptoms if I forget to add this.
CUCM Administration/Media Resource/Mobile Voice Access - set the MVA
number and locale.
Let us know how you get on?
regards
Peter
On 3/17/2013 12:53 PM, sanity insanity w
Hello All,
I have been trying this config for MVA for close to 2 weeks now and it
does not work . Here are the details
The Issue :
==
I am trying to Intiate a Call from PSTN phone to site B gateway (H323)
3033300 it should ask for
authentication once authenticated press 1
t..."
Today's Topics:
1. Mobile Voice Access (Felton (Feng) Xu)
--
Message: 1
Date: Sat, 30 Jun 2012 05:06:09 -0700 (PDT)
From: "Felton \(Feng\) Xu"
To: "ccie_voice@onlinestudylist.com"
Subject: [
Hi,
I am doing the mobile voice access lab, I found most of the configuration guide
will include the H.323 gateway to play the IVR according to the VXML file. For
my current lab, I only have the CUCM over VMware, and an Asterisk server acting
as PSTN/PLMN via SIP trunk to CUCM. Is that possible
very good to know ! thx for the tip Vik, I was unaware of this. So the
workaround is: set RD = ANI and eventually use application dial rules to
map the RD to the route plan used.
2012/3/7 Vik Malhi
> Welcome Mathew.
>
> Juan- sporadic in all 7.x. Sometimes works, sometimes doesn't. My advice-
>
Welcome Mathew.
Juan- sporadic in all 7.x. Sometimes works, sometimes doesn't. My advice- don't
go anywhere near partial matching for the lifetime of your CCIE-V Lab prep.
Vik Malhi – CCIE #13890
Managing Partner - IPexpert, Inc.
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Mailto:
is this a general issue? I did not have this kind of problem: RP set to
+e164 and partial match did not give any problems in my case...
Used UCM version is 7.0.1.11000-2
thx!
Juan
2012/3/6 Mathew Miller
> Thanks much Vik!
>
> I have confirmed that if I have a 10 digit RD and get 7 digit ANI and
Thanks much Vik!
I have confirmed that if I have a 10 digit RD and get 7 digit ANI and
set to Partial Match that every time I experience this behavior with
the annunciator. When I changed it to full match with a 7 digit RD it
fixed my problem.
On Tue, Mar 6, 2012 at 11:08 AM, Vik Malhi wrote
Aw man... I've been pulling my hair out (the little bits I have left) over
this for the past 2 days. This solved it. Thank you!
On Tue, Mar 6, 2012 at 12:32 PM, Joe Martini wrote:
> I ran into this when using 7.0.2 for studying and found the bug ID for it:
> http://tools.cisco.com/Support/BugToo
I ran into this when using 7.0.2 for studying and found the bug ID for it:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy60115.
As Vik said complete matching is an easy workaround.
Joe
On Mar 6, 2012, at 12:10 PM, Vik Malhi wrote:
And I f
| CCIE_Voice] Mobile Voice Access
And I forgot to mention don't use partial matching (at least in
7.x)...always leave it as "complete match"...
Vik Malhi CCIE #13890
Managing Partner - IPexpert, Inc.
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
And I forgot to mention don't use partial matching (at least in 7.x)...always
leave it as "complete match"...
Vik Malhi – CCIE #13890
Managing Partner - IPexpert, Inc.
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Mailto: vma...@ipexpert.com
On Mar 6, 2012, at 8:29 AM, Mathew Mi
I'm guessing you are using "partial matching" of the ANI versus the RD.
Make it a complete match- in other words whatever the ANI is (from the PSTN in
the Q931 debug) make this the RD number.
Vik Malhi – CCIE #13890
Managing Partner - IPexpert, Inc.
Telephone: +1.810.326.1444 ext 420
Fax: +1.
Hello All,
I have setup mobile voice access for use to be able to dial extensions using
enterprise access in my home lab. 100 times out of 100 it works just peachy
I setup my dial-peer on my router, I setup the IVR service on the router, I
setup my RDP and RD, along with my Mobile Voice Access n
Hello,
Did you add this gateway as H323 in CUCM as well? Features and Services
guide does not seem to mention MGCP for this feature.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fsmobmgr.html#wp1206437
Were you specifically asked to have MVA and MGCP without H323?
Rega
Hi Shrini,
What about your UCM configuration?
1.> is your H323 GW registered with UCM?
2.> what is your dialing behavior internally?4 or 10?if is 4,
then your in & outbound dp should be 4 digit patten as well
instead of 10.
Please provide more info
Shingei
On Sun, Jan 2, 2011 at 4:13 PM, Shrini
t; Thanks all.
>> Shrini
>>
>> *From:* ShinGei Yong [mailto:shingei.y...@gmail.com]
>> *Sent:* Sunday, January 02, 2011 6:42 AM
>> *To:* Shrini; ccie_voice@onlinestudylist.com
>> *Subject:* Re: [OSL | CCIE_Voice] Mobile Voice Access
>>
>> Hi Shrini
Hi Experts,
"Wish you all a Happy and Prosperous New Year 2011"
First question this year :-)
HQ Site is MGCP.
When I call HQ Phone 5002 , HQ PSTN is ringing -- > all is good.
I have configured MVA number 5999 in service parameters and
Media Resources --> MVA --> 5999 / PT-INTERNAL / Eng
: ShinGei Yong [mailto:shingei.y...@gmail.com]
Sent: Sunday, January 02, 2011 6:42 AM
To: Shrini; ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access
Hi Shrini,
What about your UCM configuration?
1.> is your H323 GW registered with UCM?
2.> what is your dialing be
: Re: [OSL | CCIE_Voice] Mobile Voice Access
Hi Shrini,
If you follow the Features and Services Guide as mentioned before, you will
have success. You need to configure "hairpinning" for MGCP to work with
MVA.
The idea is that you will accept the call using 5999, but the MVA pi
ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Carpio
Sent: Sunday, January 02, 2011 7:40 AM
To: ShinGei Yong
Cc: ccie_voice@onlinestudylist.com; Shrini
Subject: Re: [OSL | CCIE_Voice] Mobile Voice Access
Hello ShinGei,
Thanks for the info. In the end, MGCP will not make it for us
on HQ and it should work.
>
> Thanks all.
> Shrini
>
> *From:* ShinGei Yong [mailto:shingei.y...@gmail.com]
> *Sent:* Sunday, January 02, 2011 6:42 AM
> *To:* Shrini; ccie_voice@onlinestudylist.com
> *Subject:* Re: [OSL | CCIE_Voice] Mobile Voice Access
>
> Hi Shrini,
>
Hi Warren
Check if the CSS applied to the remote destination profile can see the
number you are attempting to dial out when using mobile voice access.
On Tue, Jul 20, 2010 at 1:12 PM, Warren Heaviside (wheavisi) <
wheav...@cisco.com> wrote:
> Experts,
>
>
>
> I’m configuring MVA and having th
Warren
There should be a service parameter that toggles between using the gateway CSS
or the device + remote destination profile CSS for call routing decisions.
Yu could try playing with that.
Matthew Berry
**Sent from my iPhone**
Skype/Twitter: ciscovoiceguru
Google Voice: +1 612 424 5044
O
Experts,
I'm configuring MVA and having the following issue:
PSTN call comes into HQ H.323 G/W from 415-888-4343. Caller hears the
VXML script prompt to enter the Remote Destination (4158884343) followed
by pound, then a prompt for their PIN followed by #. The next prompt is
to press 1# t
Hi,
It seems that I have an issue getting the MVA oerational.
Actually I use a H323 gatway connected to the CUCM, so when I call from my
remote destination I have the prompt saying " Please enter your userid ..."
rather than getting the pin prompt.
I did a trace on the CUCM then it seems that
Hi,
It seems that I have an issue getting the MVA oerational.
Actually I use a H323 gatway connected to the CUCM, so when I call from my
remote destination I have the prompt saying " Please enter your userid ..."
rather than getting the pin prompt.
I did a trace on the CUCM then it seems that
28 matches
Mail list logo