Josh,
Check this:
!
application
service cmm http://10.10.210.10:8080/ccmivr/pages/IVRMainpage.vxml
^^^
!
!
dial-peer voice 5010 voip
description MVA DID
destination-pattern 5999
voice-class codec 1
session target ipv4:10.10.210.10
incoming called-number .
dtmf-relay
I created a scenario by GNS3: two sites one work with CME and the other work
with CUCM and I can call from CME to CUCM but I can't call from CUCM to CME, I
want to know what is the problem here?
_
Mohammad Khaled Said
+962788039715
Know about me
Could be a whole host of things. Do a debug voip dialpeer inout on the CME and
place the call from UCM to CME. That'll help ID the cause.
DQ
d...@cisco.commailto:d...@cisco.com
Sent from my iPhone
On Sep 12, 2012, at 1:14 PM, Mohammad Saeed
There a couple things you can do
1.) in Telephoney-services add the following:
secondary dialtone 9
timeout interdigit 5
2.) you dial-peer should look similar to this.
Dial-peer voice 55 pots
Destination-pattern 9[1-9]...$
Port 0/3/0:15
The first sets the
CBarge/Privacy-button
You will need an ephone-template to do this.
Example:
ephone-template 1
privacy off
softkeys remote-in-use CBarge NewCall
softkeys idel Cfwdall ConfList Join NewCall Redial
and on the phone that you want to give the privacy button to you need to
program it on the
I would highly recommend the following for the information you're seeking:
3750 Configuration Guide
Enterprise_QOS_SRND
Medianet Campus QOS Design 4.0
Medianet Reference Guide
Also here is the link that you will have available to you in the lab where you
can find the QOS information:
Reload the router.I have had this issue too.
--
Smile, you'll save someone else's day!
Frog
Mike,
As Anil mentioned - you can download a demo version of IPBlue's
product called VTGO linked through our ProctorLabs.com website or
linked here as well:
http://ipblue.com/download.asp?software=vtgo_lite
However, due to the 20 minute running limitation that Anil mentioned
that the
So is the 20 minute limit that the phone only works for 20 min's and then
you can't use it anymore or does it just kill the app and you start it back
up?
On Dec 11, 2007 11:52 AM, Mark Snow [EMAIL PROTECTED] wrote:
Mike,
As Anil mentioned - you can download a demo version of IPBlue's
product
I have set up a lab at work and VPN in during the evening. At the moment I have
IP communicator either getting it's config from the Callmanager or from the CME
router.
Is it possible to have multiple softpone instances running at the same time on
one laptop as this would make things a lot
In my 'Add Route Group' configuration page I cannot see my 6608 E1 MGCP
gateway, nor can I see my H.323 Gateway I configured. But I can see my 24port
FXS blade that sits in my 6608.
Can anyone think of any reason for this ? There were a few interesting Cisco
bugs but the workaround of adding
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Reid
Sent: Friday, November 30, 2007 4:54 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Subject: Can't see 6608 E1 in route group
configscreen
In my 'Add Route Group' configuration page I cannot see my 6608 E1 MGCP
12 matches
Mail list logo