, cheers :)
ThanksRgds
Deepak Sidana.
From: Joli-coeur Wouter jwou...@gmail.com
To: Deepak sidana sidana_dee...@yahoo.com
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Sent: Fri, 7 January, 2011 4:07:17 AM
Subject: Re: [OSL | CCIE_Voice] T1
...@onlinestudylist.com] On Behalf Of Deepak sidana
Sent: Friday, January 07, 2011 7:44 AM
To: ccievoice
Subject: Re: [OSL | CCIE_Voice] T1 Pri Issue
Thanx all, for your valuable inputs.
The issue is solved, my GW is registered with CCM.
Earlier i was reactivating mgcp bind media source-interface loop0 mgcp
Hi All,
I am trying to connect the T1 from Br1-RTR to PSTN-WAN. Only when i use service
mgcp, under controller, layer 2 isdn staus as TEI_ASSIGNED.
At PSTN-WAN Router, i am using isdn protocol-emulate network under s0/0/0:23
Branch1 Config:-
BR1-RTR#sh isdn sta
Global ISDN Switchtype =
Remove isdn bind and reassigned
duy
ccie #27737 voice
tmobile g2
On Jan 6, 2011 3:44 PM, Deepak sidana sidana_dee...@yahoo.com wrote:
Hi All,
I am trying to connect the T1 from Br1-RTR to PSTN-WAN. Only when i use
service
mgcp, under controller, layer 2 isdn staus as TEI_ASSIGNED.
At
Hello Deepak,
Have you ran the debug isdn q921 on this GW? If so; do you see messages
going back and forth between the RTR and the PSTN?
Could you please attach the configuration of T1 controller 0/0/0 as well?
Regards,
Roger Carpio.
On Thu, Jan 6, 2011 at 3:24 PM, Deepak sidana
GW.
Jeff
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Deepak sidana
Sent: Thursday, January 06, 2011 1:25 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] T1 Pri Issue
Hi All,
I am trying to connect
Do u have mgcp bound to a loopback? Try removing those if you do. Also make
sure your card type is correct in callmanager.
On Jan 6, 2011 3:44 PM, Deepak sidana sidana_dee...@yahoo.com wrote:
___
For more information regarding industry leading CCIE Lab
way should work.
cheers, sd
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Deepak
sidana
Sent: Thursday, January 06, 2011 4:25 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] T1 Pri Issue
Hi All,
I am
: givemeccievoice2...@gmail.com givemeccievoice2...@gmail.com
Subject: Re: [OSL | CCIE_Voice] T1 Pri Issue
To: 'Deepak sidana' sidana_dee...@yahoo.com, ccie_voice@onlinestudylist.com
Date: Friday, January 7, 2011, 3:26 AM
Do you have this GW configured on CUCM? Is the gateway showing registered on
CUCM
There is not enough info here to troubleshoot this issue.
Post full config of br1and pstn router and tell us what you have configured in
cucm and what your goal is.
Your controller config is not matching your serial interface number.
Controller 0/0/1
Serial interface 0/0/0
Reg,
Jolicoeur
10 matches
Mail list logo