: [OSL | CCIE_Voice] cBarge problem using MVA
So is your conference bridge in a different location than phone ?
Sent from my iPad
On 20/09/2011, at 12:40 AM, Ashraf Ayyash wrote:
> nice , to add to this , when the CCM setup conf call , he will ask for
> new call BW so take this to the conside
the
>> lab and that this was causing the cbarge to fail. Working now.
>> Thanks
>>
>> -Original Message-
>> From: Ashraf Ayyash [mailto:ash.ayy...@gmail.com]
>> Sent: 19 September 2011 02:25 PM
>> To: Rynard Coetzee
>> Cc: ccie_voice@onlines
eptember 2011 02:25 PM
> To: Rynard Coetzee
> Cc: ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] cBarge problem using MVA
>
> Hey Rynard ,
>
> as you are using Cbarge , there is no need for Built in Bridge , you will
> need have the privacy off and the barg
...@gmail.com]
Sent: 19 September 2011 02:25 PM
To: Rynard Coetzee
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] cBarge problem using MVA
Hey Rynard ,
as you are using Cbarge , there is no need for Built in Bridge , you will need
have the privacy off and the barge method as
Hey Rynard ,
as you are using Cbarge , there is no need for Built in Bridge , you
will need have the privacy off and the barge method as Cbarge from the
phones pages , reset the phone and check the behavior ( make sure that
you will have conf brigde available for the phones inside your MRGL
Ash
Hi
I have issue to get cBarge to work when dialling in via my MVA number. When I
dial the MVA number and then start a new call to my HQ phone ,my Branch 2 shows
the Remote in Use ,but when I try to Cbarge into the call ,I just get a
fastbusy. I have Hardware conference bridge setup for both HQ a
