Sometimes this happens, many have complained about it, some only do manual
configuration, some figure out how to delete the template and reapply. It
is really up to you to find what way works best for you and learn how to
fix that method when you take the lab if you get MLP LFI
On Sat, May 19, 20
0
>
> CC: com...@gmail.com; cc...@corb.net
> Subject: Re: [OSL | CCIE_Voice] does MLP LFI break your wan?
>
> I've run into it...
> Blow auto qos away and reboot, sometimes it takes 2 or 3 times, assuming
&
@onlinestudylist.com
Date: Sat, 19 May 2012 12:08:12 -0500
CC: com...@gmail.com; cc...@corb.net
Subject: Re: [OSL | CCIE_Voice] does MLP LFI break your wan?
I've run into it...
Blow auto qos away and reboot, sometimes it takes 2 or 3 times, assuming the
router doesn't crash when you try to
d quitters never win, then who coined the phrase, "Quit
while you’re still ahead."?
Date: Sat, 19 May 2012 12:40:17 -0300
From: brun...@gmail.com
To: ccie_voice@onlinestudylist.com
CC: com...@gmail.com; cc...@corb.net
Subject: Re: [OSL | CCIE_Voice] does MLP LFI break your wan?
H
Hey guys,
Has anyone discovered what goes wrong with the interfaces after applying
MLP LFI?
I am running the same problem on my lab3.
When I configure MLP LFI on both sides, the virtual interface stays up/down:
Virtual-Access110.10.111.2 YES TFTP up
down
I have already reboote
Yeah I've had this problem before. First off, you have to configure it on
both sides for it to come back up. It usually comes right back up once you
run auto qos voip fr-atm on both sides. If it doesn't, wr mem and reboot
both routers should fix it.
In proctorlabs, I haven't had to reboot the r
I am having the exact same problem. virtual-access1, virtual-access2, and
virtual-template200 are all in a down/down or up/down state. Not sure how
to rectify it. Anyone else experienced this and figure out what was wrong?
On Tue, Nov 23, 2010 at 12:33 PM, Romain Mullier
wrote:
> Hi guys,
> wa
Hi guys,
was working on lab3, RSVP configuration worked well but after applying MLP
LFI between HQ and BR1, I cannot bring the virtual interfaces up. Has
anyone seen this before? (Routers have been reloaded)
Thanks for your help.
HQ
class-map match-any AutoQoS-VoIP-RTP-Trust
match ip dscp ef
cl