>Brian Walenz wrote:
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read
Which box?
On Sun, Mar 6, 2016 at 5:02 PM, wrote:
> I want a front panel for my lsi 11 w/switches and lights! Ed#
> _www.smecc.org_ (http://www.smecc.org)
>
On 03/06/2016 6:49 AM, Dave G4UGM wrote:
I think Thunderbird will allow import from the old Netscape mail client.
Dave
I access Giganews via Thunderbird (OSX) - works very well...
The downside is it costs about $8/month, but that is a very small
business expense. Upside is Giganews goes
I want a front panel for my lsi 11 w/switches and lights! Ed#
_www.smecc.org_ (http://www.smecc.org)
On Sun, Mar 6, 2016 at 2:17 PM, Brian Walenz wrote:
>
>
> http://www.dbit.com/putr/putr.asm has the following:
>
> ;
> ; RX01 interleave routine.
> ;
> ; bplogical device rec
> ; chcylinder (0-75.)
> ; cllogical sector (0-25.)
> ;
> ; On return:
> ; chcylinder
Hi All,
maybe someone can help me to bring my TU81 back to life again.
I have checked the following, before turning on:
- All capacitors on the Mail Power Supply and the one below the vacuum
pump are fine
> OK
- Voltages check
> OK
- Fuses
> The Fuse for the diagnostics power connector was
On Sun, Mar 6, 2016 at 5:06 PM, Don North wrote:
> From the SIMH pdp11 RX driver (pdp11_rx.c) the disk size is computed as
> follows,
> and the byte offset into the file is computed by CALC_DA(trk,sec) given
> the PHYSICAL
> track (0..76) and sector (1..26) addresses used in
On 3/6/2016 8:56 AM, Brian Walenz wrote:
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but
On Sun, Mar 6, 2016 at 3:33 PM, Mattis Lind wrote:
>
> Did you have problems with my RAW files as well? Which? I tested a few of
> them right now and they seemed to work fine.
>
Nope, no problems. That was what triggered this...that someone else could
do it.
I jury
>Brian Walenz wrote:
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read
SeaMonkey is essentially the same code as in Thunderbird/Firefox. Personally
I prefer to keep browser and mail/news separate. Pretty sure it will import
from the old Netscape Communicator.
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Jerome H.
>
2016-03-06 17:56 GMT+01:00 Brian Walenz :
> How the heck do you copy an RX02 disk for use in simh?
>
> I've been trying to transfer RX02 images between simh and a real PDP11
> (that has only two RX02's, console, and ethernet). So far, I've only
> attempted sending an RX02 image
On Sun, Mar 6, 2016 at 10:33 AM, Mark J. Blair wrote:
> I have managed to munge RX02 disk images into a format that SIMH understands
> a year or so ago. Unfortunately, I didn't keep notes about how I did it, and
> now I've forgotten what I did, possibly using some throw-away code
I have managed to munge RX02 disk images into a format that SIMH understands a
year or so ago. Unfortunately, I didn't keep notes about how I did it, and now
I've forgotten what I did, possibly using some throw-away code that I've since
thrown away. Or maybe I dumped the disks to image files on
This thread is a parallel discussion to a VCF thread that I started last night:
http://www.vcfed.org/forum/showthread.php?51653-Dumping-Images-of-my-VAX-11-730-s-Drives
With today being cold and rainy, it seems like a good excuse to turn on my
VAX-11/730. I can boot either VMS 5.2 off the RL02
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read it: "?DIR-F-Invalid
>Toby Thain wrote:
>On 2016-03-06 9:27 AM, Jerome H. Fine wrote:
I have a question about access to newsgroups. Which currently available
browser is able to access a newsgroups server? Currently, I am using
Netscape 7.2 under Windows 98SE. If I upgrade to Windows 10,
I probably won't find
On 2016-03-06 9:27 AM, Jerome H. Fine wrote:
>On Saturday, March 5th, 2016 at 12:53:22 +, Robert Jarratt wrote:
My ISP appears to have stopped updating the newsgroups it hosts.
What news servers do people round here recommend?
I have a question about access to newsgroups. Which
At 09:27 AM 3/6/2016, Jerome H. Fine wrote:
>I have a question about access to newsgroups.
I have never used a browser for Usenet - I have always used Forte Agent, a
Usenet client:
http://www.forteinc.com/main/homepage.php
I think Thunderbird will allow import from the old Netscape mail client.
Dave
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Jerome H.
> Fine
> Sent: 06 March 2016 14:27
> To: General Discussion: On-Topic and Off-Topic Posts
>
>On Saturday, March 5th, 2016 at 12:53:22 +, Robert Jarratt wrote:
My ISP appears to have stopped updating the newsgroups it hosts.
What news servers do people round here recommend?
I have a question about access to newsgroups. Which currently available
browser is able to access a
Ciao at all, i'm from Italy.
I'm not much present cause other interests.
Anyway on my website www.vintagesbc.it you can find info on Ferguson
Bigboards I and II.
Exactly my Ferguson Bigboards I is more properly a clone of the original one
that I bought from a little LTD in Italy on 1983.
22 matches
Mail list logo